HP pavilion a230n win xp will not pass in series-up... windows will not start

Similar Questions

• Pavilion g6: Win 7 does not start

  My laptop starts with a blue screen. After playing from repair.
  A component of the operating system has expired. File Windows\System32\winloadexe
  0xc0000605 error code

  It doesn't let me do anything other than look at the Bios
  What operating system component average?

  Win 10 was a beta version, so it expired while I was not using the computer...

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• Pavilion 500: HP500-326na does not start... not the power of USB devices

  Three days of warranty expirition my HP Pavilion 500 turned off and will not start.

  The led on the back of the case is on.

  The led on the motherboard is on.

  Fans for the processor and the case work.

  There is no power to any USB port... so without mouse and keyboard.

  There is no signal on the screen.

  The power switch will not shut the unit, regardless of how long you hold in.

  There is no beeps on the motherboard at startup.

  I cleaned the dust.

  I have disconnected all drives and plugged back in one at a time.

  I deleted the memory chips vivid and re-sitting them.

  I removed the graphics card and re-sitting there.

  All to nothing does not.

  There is no way to run diagnostics or tests with a mouse and a keyboard.

  What else can be done to determine the case of this problem?

  Thank you.

  So if you had followed this document and still has not changed, the only thing left is to contact the helpline.

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Example: Pavilion ac123tx: hosted network does not start

  in my computer hp laptop ac123tx (preloaded with win 10 OS) not able to start the wifi hotspot because it lacks the virtual network adapter hosted Microsoft. I tried to start the hosted network from cmd prompt, but every time it gives message hosted network could not be started. The group or resource is not in the correct state to perform the requested operation. what need have the solution to this?

  Hello @gbnavapara,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!

  Have you tried activation of the adapter in the Device Manager?  You can use the resources here to help: difficulty The Hosted network could not be started in Windows 10 error

  (Not a HP website supported).

  Also, you can try to update your network drivers.  If you're still having problems, then try to review the measures offered in the following post:

  Re: Microsoft organized virtual adapter network - this device is not connected to the computer

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Pavilion a6532me: a6532 Pvillion does not start

  When I turn on, PC freezes in the start screen.  I can no longer enter System Recovery, Set Up or Boot Menu now.  BIOS v5.43. Before I could, and diagnostic tests gave everything OK.  Tried to boot from a disk OS Win7, but does not start from a DVD.  Drive light flicks on twice on power on, then turns off completely.  All this a few weeks after updrading to W10 - PC W7 from hang up with drive light permanently several times.  If it was a problem with HD, it surely would boot from a DVD? All advice welcome.  THX

  Disconnect the hard drive and then power the system on. Sometimes a failing hard drive will cause weird problems.

• Pavilion 15-p027tx: Beats Audio not start on windows Startup

  I updated my Hp Pavilion windows 10 p027tx when windows 10 has been released. But 2-3 days before I updated my drivers little to the last version that was available. I've also updated the audio driver realtek. But the problem is after update, Beats Audio does not start on starup windows. Beats Audio is still there but I have to start it manually by searching on it. Earlier, it allows to start in backgroud with an icon in the system tray. But now it doesn't. I have to start it manually. All the solutions to this?

  Hello

  Another option would be to add the missing registry key which you can follow these steps.

  First, hold down the Windows key and press R.  In the run window, type : starting the interpreter, hit enter and then delete the boot entry you added earlier.

  Before you begin, click the Start Menu, select settings, select system, Notifications & actions select on select icons appear in the taskbar - make sure that that there is not an entry for "Realtek HD Audio Manager" which is just off."

  According to what you find, follow these steps.

  1. if there is an entry for "Realtek HD Audio Manager", set it to On and restart the computer and see if it fixed the problem.

  ***********************************************************

  2. if there is not an entry for "Realtek HD Audio Manager", hold down the Windows key and press R.  In the run window, type regedit, press ENTER, and then click 'Yes' to the uac prompt.

  Go to the following.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run       (click on Run to make sure it is highlighted ).

  In the larger right pane, right-click on an empty area, move the pointer over new, and select string value.

  Name RTHDVCPL and press ENTER.

  Now, do a right click of RTHDVCPL and select Edit.

  Copy the entry below and paste it in the "Value data" field

  "C:\Program Files\Realtek\Audio\HDA\RtkNGUI64.exe" s

  Click Ok to save it.

  Close the registry editor and restart the laptop.

  When windows has reloaded, click on the Start Menu, select settings, select system, Notifications & actions select on select icons appear in the taskbar - make sure that the entry for "Realtek HD Audio Manager" is set to one.

  Kind regards

  DP - K

• Win 7 does not start on the Satellite

  So last night, I was using my Toshiba Satellite laptop.
  I know a lot of details because I'm not very good with laptops. Here is where the problems start.

  So after I finished I stopped him.
  The next morning I wake up, he would not start windows.
  I am currently using windows 7. Anyway, he tells me to stop. I start again, and then it gives me only 2 options: Startup Repair or run windows normally.
  When I try run windows normally it says "starting windows", but it never starts.

  Then when I try the startup repair it will attempt to repair and I do for 8 hours and no luck. It is said a recent move of hardware or software can have him cause. But I got nothing except the charger is connected.

  I REALLY WANT TO USE MY LAPTOP D:

  CAN SOMEONE HELP ME PLEASE? !!

  > I am currently using windows 7. Anyway, he tells me to stop. I start again, and then it gives me only 2 options: Startup Repair or run windows normally. When I try run windows normally it says "starting windows", but it never starts.

  It seems that the Windows operating system was messed up I m not very well why, but these things that happens simply
  However, you can try to recover the laptop using the recovery of HARD drive option. But it will not work, if you didn t format the HARD drive and didn't delete the partition of HARD drive recovery.

  So try to power the device, press F8, choose repair my computer, then choose recovery Toshiba.
  Notes; This reformatted the system partition currently which means that you lose the files on the C partition.

• HP envy Phoenix: win 7 does not start with connected external hard drive

  I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

  Hello

  The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

  @tpetras

  I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

• HP PAVILION HPE h8-1192d: could not start after installing new graphics card

  I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

  Hello

  NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• Win 7 does not start after the creation of new partition for fileswaping.

  Hello!

  As the header says, Windows 7 does not start. Made a partition to swap files between OS X and Windows 7.

  I saw in a thread that it could be repaired using fdisk. I'm really new to OS X, so I did not really

  know what to do. Writing the result of the controls, I found in the thread.

  I know now there is a warning to the partition AFTER installing Windows.

  Would really appreciate if everyone took some time telling me what to do!

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage MacBook Hoveddisk 382,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database FILDELING 16.6 GB disk0s4

  5: Microsoft Windows HD 100.0 GB disk0s5 data base

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 382,2 disk1

  Logical volume on disk0s2

  AD4E7A3F-9F8E-4734-8B4B-B65587CDD2A1

  Unlocked encrypted

  Fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-747116216]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [747525856-1269536]

  4: 0 b 1023 254 63-1023 254 63 [748795392-32403968] Win95 FAT-32

  TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 747116216 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  747525856 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  748795392 32403968 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  781199360 262144

  781461504 195311616 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  You see the Windows files in the volume of training using the Finder?

• HP Pavilion Dv6 win 7 will not connect to the internet (WiFi Atheros AR9258 adapter)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Hello.

  I have a HP Pavilion Dv6-2110AX Windows 7 Home Premium and one a few days ago I had a problem with the internet/network connection.

  It was working normally and then, suddenly, just collapsed. I tried everything I know: System Restore, update the wireless driver (Atheros AR9258 wireless adapter - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48488.exe), reset the driver (I don't know if I did it right), but nothings helped to y for remedy.

  The only message I get I can't try something there: "Windows has not automatically determine the network proxy settings." I tried to do it manually, but it won't let me change any configuration in there, I don't know why.

  In the Device Manager, it indicates that the wi - fi adapter is not working properly and I can't access internet and network with my smartphone and 2 other computers at home, so I guess that the problem is not the router and I don't know what else to do.

  The only thing I have not tried to change IP address, because I don't have the Setup for this network and I don't know if this will help also.

  I appreciate all help. Thank you!!

  Spoiler (Highlight to read)

   

  Hi.I have a HP Pavilion Dv6-2110AX Windows 7 Home Premium and one a few days ago I had a problem with the internet/network connection. It was working normally and then, suddenly, just collapsed. I tried everything I know: System Restore, update the wireless driver (Atheros AR9258 wireless adapter - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48488.exe), reset the driver (I don't know if I did it right), but nothings helped to y for remedy. The only message I get I can't try something there: "Windows has not automatically determine the network proxy settings." I tried to do it manually, but it won't let me change any configuration in there, I don't know why. In the Device Manager, it indicates that the wi - fi adapter is not working properly and I can't access internet and network with my smartphone and 2 other computers at home, so I guess that the problem is not the router and I don't know what else to do. The only thing I have not tried was change IP address, because I don't have the Setup for this network and I don't know if this will help also. I appreciate all help. Thank you!!    

  MR. B

  Well well, after 1 month trying to get assistance from HP and after 2 weeks in this forum (thanks to everyone who saw the subject and tried to help ) I just gave up and did what I have done since I had the problem.

  My solution was to use the recovery discs to "Reinstall" everything and now the laptop is like when I bought it, but works.

  If you decide to do, REMEMBER to backup all your files before otherwise you goanna lose everything, because the recovery system returns your computer to the factory settings.

  The best thing is, it took less than an hour to do. If I'd known...

  Good luck people, c is the next time (hopefully not soon)... hehhehe!

• Pavilion dv-6 3216 does not start

  I'm trying to upgrade my Pavilion dv-6 3216 with a SSD 240G PNY. First thing I did was to create a set of system restore disks. Then I swapped the mechanical original 320G with the SSD drive.

  Then, I started the system using the recovery disk and used the Recovery Manager to restore the system to the SSD. The process went through all 7 DVD without error. At the end a message came to remove any recovery media while the system complete the recovery process.

  After clicking 'continue' the computer restarted, but he no more than a black screen with a cursor to underscore flashing in the upper left corner. I waited at least 30 minutes, nothing else has happened. I turned off the computer and restarted but it's the same thing. I went into the Boot Manager to ensure that the system was booting from the internal drive and got the same black screen.

  I gave the original mechanical hard drive and start Windows 7 system as before. I handed the SSD into the computer and went through the recovery process a second time. Same result - just a black screen with the blinking cursor.

  I ran diagnostics on the memory and hard drive and they both pass.

  I took the SSD and put it in a box external USB drive and connected to my office. My office can see all the files/folders the recovery process was copied on the SSD drive. Device Manager identifies the primary partition and active.

  A ran a scan of disk on the SSD in my office and it shows the disc to be in good health.

  So, what gives? Is there a compatibility issue with the SSD? I went into the BIOS but did not find any configuration/settings for hard drives. Is there a requirement for the destination drive of recovery to the brand/ability as well as the original?

  Is it possible that the recovery disks are corrupt? It does not seem that so much as there is no problems/errors during the process of creation or the restore process. I would try to create a bootable USB key or another game but the Recovery Manager limit the creative process to 1.

  Does anyone else has encountered this problem after replacing their hard drive, either with another mechanical drive or SSD?

  Hello Calgary_BMW,

  Welcome to the HP Forums!

  I see that you have replaced your 360 Go drive (5400 RPM) with a SSD 240 GB and after running the system recovery, are unable to start Windows. It is probably the case because the recovery media is to install the bootloader on the SSD drive even as it was on the HARD drive; pointing the bootloader to another source, which would explain the blank screen and a blinking cursor. If this is the case, that the recovery media won't work, then we are quite limited with options.

  Option 1: Purchase a copy of Windows and run a complete Windows installation, which must recreate the bootloader on the SSD and the start of your player. After the installation of Windows, you should be able to run your media recovery and restore of your software.

  Option 2: Cloning the mechanical drive of the SSD. This option requires you to connect both the 5400 RPM drive HARD and the SSD at the same time. Your laptop has only support for a SATA connection, so this will require the use of another PC with multi-SATA (any desktop PC) entry. There are a large number of suppliers who provide software to clone the disks, all these can be easily found with a simple Google search.

  I would like to know how it works for you.

• HP Pavilion dv6-3150us Entertainment Notebook not start after sitting on the side.

  Hello! I have a HP Pavilion dv6-3150us Entertainment Notebook that works under Windows 7. Last week, I traveled with him in Florida, and when I arrived and tried to turn on the laptop, it wouldn't start. The screen was white with thin lines going through it and the screen turned slowly black. I disassembled the computer and put it back together (which I have experience with, I installed a new fan at the beginning of last year) and he came in safe mode. This ihappened still once I put the laptop in my bag on back and then he pulled out a few minutes later (without even moving) and when I got home. I tested the hard drive and memory, and they both passed. Other that this question, the computer has worked fine. I need to get this problem solved, because I am a PhD student and travel frequently with your laptop. Could someone help me please? What causes this problem? Thank you.

  Hey irol72,

  Welcome to the Forums of HP Support! I understand that your HP Pavilion dv6-3150us is not initialize after being on his side, I understand your frustration and I would start you the black screen troubleshooting with no. Error Messages at startup or start-up.

  Thank you