Pavilion dv-6 3216 does not start

Similar Questions

• Pavilion a6532me: a6532 Pvillion does not start

  When I turn on, PC freezes in the start screen.  I can no longer enter System Recovery, Set Up or Boot Menu now.  BIOS v5.43. Before I could, and diagnostic tests gave everything OK.  Tried to boot from a disk OS Win7, but does not start from a DVD.  Drive light flicks on twice on power on, then turns off completely.  All this a few weeks after updrading to W10 - PC W7 from hang up with drive light permanently several times.  If it was a problem with HD, it surely would boot from a DVD? All advice welcome.  THX

  Disconnect the hard drive and then power the system on. Sometimes a failing hard drive will cause weird problems.

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• HP Pavilion P6-2496ea: Pc does not start, no startup screen is

  Hello
  I have a HP Pavilion with D7B29EA #ABU product number and model number P6-2496ea.
  
  I tried to run a repair on a HARD disk that was connected externally, it was taking too long so I cancelled the process and rebooted my PC.
  
  The reboot took much too long, so I forced shut down the system. Then I tried to turn on my PC, but it does not reach the power upward.
  
  When I tried to turn on my PC, I noticed the following:
  -no screen, just a screen black (I tried different video output on the PC, but with the same result, no video)
  -LED 'on' which starts as amber and then turns to blue flashes only on amber.
  -by turning the HARD drive and the fans are running.
  
  I tried to reset the BIOS to factory settings, but not joy.
  
  Any help will be greatly appreciated.

  Hi all

  After some research, I came to a conclusion that the above symptoms were caused due to a corrupt BIOS.

  I run a BIOS reset procedure several times but only started to notice results after 24 hours a BIOS reset.

  Reset method for those who do not know the BIOS, please see the steps below:

  1 turn off the machine.

  2 - remove all the USB connections of the machine (the keyaboard dongle and mouse apartment)

  3 - Unplug the power to the system.

  4 - with the cable disconnected, amd press hold the power button on your machine for 3-5 seconds.

  5 - Remove the battery from the motherboard BIOS.

  6. remove the jumper from pins 1-2 amd put on pins 3-5 (for HP Pavilion p6-2496ea, for other models please refer to the manual of the motherboard).

  7. usually you leave the machine in this State for 15-20 minutes and then follow the rest of the instructions. If a reset of 20 minutes work try a reset 8 or 24 hours (leaving the machine with the reset jumper on).

  8 - Mount the batery.

  9. remove the jumper to reset the pins and fit the default PIN, 1-2.

  10-card sector in the system.

  11. turn on the machine, you should have a boot system.

  I hope the above helps you guys, it certainly worked train me.

  Good luck.

• Pavilion 500: HP500-326na does not start... not the power of USB devices

  Three days of warranty expirition my HP Pavilion 500 turned off and will not start.

  The led on the back of the case is on.

  The led on the motherboard is on.

  Fans for the processor and the case work.

  There is no power to any USB port... so without mouse and keyboard.

  There is no signal on the screen.

  The power switch will not shut the unit, regardless of how long you hold in.

  There is no beeps on the motherboard at startup.

  I cleaned the dust.

  I have disconnected all drives and plugged back in one at a time.

  I deleted the memory chips vivid and re-sitting them.

  I removed the graphics card and re-sitting there.

  All to nothing does not.

  There is no way to run diagnostics or tests with a mouse and a keyboard.

  What else can be done to determine the case of this problem?

  Thank you.

  So if you had followed this document and still has not changed, the only thing left is to contact the helpline.

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP Pavilion TS Sleekbook 14: HP Pavilion TS Sleekbook 14 does not start

  Hi, I have a HP Pavilion Sleekbook 14 TS that simply no longer starts.  The last time that I used it, I had installed an antivirus (Avira) on this subject. Now, when I try to boot, it freezes on the password screen. Or it starts but does not load anything. All the advanced recovery options have failed. I tried the system restore and even tried to factory reset it because all my files are saved in LV, nothing works. Every time I try these recovery options, he encounters an error and restarts. Thus the cycle starts again. I ran a test system expanded on it, but she encounters an error on check Optomised DST

  .

  Failure ID is MC3X6W-65C7LN-MFPWXF-61QJ03

  The lack of a dvd on her player makes it even more difficult to try to boot from a windows cd! I have a windows 7 cd it came pre-installed with windows 8 that I am not against hepatitis what's wrong with it and how can I solve this problem?

  It looks like your drive HARD died, but may not try this:

  Go into the BIOS and see if modules recognition computer HARD drive

  I ' am not an employee of HP

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• HP Pavilion Notebook - 15-ab20: HP Pavilion Notebook - 15-ab206no does not start

  Hi, bought my Pavilion Notebook 15-ab206no last week. Worked fine until I went to turn it on this morning... nothing!

  LED light is orange by the AC adapter cord but other than nothing. Tried to remove the battery, running only on the AC adapter / CC and other obvious solutions, but still nothing. What should I do? The bloomin' thing is new, so I doubt that something wrong with cord or battarey West.

  Dagg333

  Hi there @Dagg333,

  I understand the fear because it's only a week.

  As it is so new, there are two options available to you. You could take it back to place of purchase and see if they will allow you to exchange it. Unfortunately I'm not sure if it will work for you because it depends on where you bought it, return policies are all different.

  If this does not please use the following link to create yourself a file number, please contact us:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  They will be happy to help you immediately.

• I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

  I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.

  Hello:

  You need to get a USB to SATA 2.5 enclosure "HDD.

  Have you thought about the plug of hard disk drive?

  The thing that looks like this?  That is removable. Just shoot.

  

• HP Pavilion G6: The computer does not start

  My computer won't boot from the system menu. It is said the last attempt to resume the system from its previous location failed. It gives me the possibility to remove restore data and switch to the system boot menu by clicking on enter, but when I do, it does nothing. Can someone help me please? Thank you

  Start using your recovery disk, if you don't have not only you can buy one at HP.  Looks like your windows is corrupted and will need a re - install.

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Pavilion 1bus50 g6: laptop does not start. Screen remains blank, but the caps lock and keys turns on wifi.

  I tried to reset and tried a new stick of memory without result. I think it's the graphics chip together, but not sure. The next step is replace the motherboard (rather than try to replace the graphic chipset) but I would like to know if the

  Flashing LED on the SHIFT key is tell me anything. It flashes 5 times, pauses and blinks 5 times and it repeatedly. Anyone knows what this means, or have any other suggestions?

  Thanx

  R.J.

  Hi @rje77,

  Welcome to the HP Forums!

  I read your post on your laptop HP Pavilion g6 and issues with flashing lights. Beep codes to listed here.

  Have you tried to reload the factory-installed BIOS configuration settings. http://ow.ly/Jsqq302g0dj.

  Let me know.

  If you want to say thanks for my efforts to help, click on the thumb to to give me a Kudos.

  Thank you.

• Pavilion g6: Win 7 does not start

  My laptop starts with a blue screen. After playing from repair.
  A component of the operating system has expired. File Windows\System32\winloadexe
  0xc0000605 error code

  It doesn't let me do anything other than look at the Bios
  What operating system component average?

  Win 10 was a beta version, so it expired while I was not using the computer...

• HP Pavilion 15-n200: laptop does not start up - gel

  My laptop has been recently upgraded to Windows 10 by a local COMPUTER company. After about a week of normal operation, it is no longer starts. E HP logo appears then freezes completely. I tried to re start several times, but it has not solved the problem of thew

  some of my documents (Word, exel, etc. are saved, but many are saved locally. These documents are really important to me and I can't save as I can't start my lap top.

  Any help would be greatly appreciated Br

  Thank you very much

  Carl

  Hello Visruth,

  Well good news, laptop fixed and running like a dream.

  I performed a chattr computer who has lost all the apps that have been sorted to the question of the gel. Since installed all apps and personal settings and everything works perfectly again.

  Thank you very much

  Carl