HP Pavilion a6000n Phoenix Bios

Similar Questions

• HP Pavilion a6000n desktop: adding false graphic RAM and freezes start.

  Well, I'm back with the same machine as the previous assignments.  I ordered the recovery of Surgeons of the computer disks and that they were unnecessary because the computer does not see any cd/dvd I have to install.  Finally gave up and ordered a Windows Vista recovery usb flash drive and installed the operating system.  I used it very well with the RAM minimum (1 GB).  I decided to upgrade the memory to use all 4 GB.  All four are recognized in the BIOS/Setup with the full 4 GB dispalyed.  The new brand of memory is Samsung.  Everything seems to be as it should.

  Here's the problem: the Windows splash screen appears with the scan progress bar and when it gets to the sixth pass it freezes as black and alternating vertical lines distorted graph color vertical lines appear.  It will remain so until I have shut down, because he has not answered all the keyboard commands.

  I removed two 1 GB modules and restarted without problem.  I've tried three, and he did nothing.  Swapped the output for the two 1gbs modules, I removed and they worked perfectly.  With four on board is the problem presented and only when windows is loading.

  I also tried safe mode.  All four ram modules work with the VGA drivers in safe mode without graphical distortions or freezes.

  I tried to restore the computer to an earlier time with the console of Windows Vista repair because he found from the problems and suggested this course of action.  When I did, he removed my Firefox browser.

  Has anyone seen this problem before or a solution?  Thank you for help.

  What follows is my computer information system:

  Name of the Microsoft® Windows Vista™ Home Premium operating system
  Version 6.0.6002 Service Pack 2 Build 6002
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer HP-Pavilion
  System model RX885AA-ABA a6000n
  System Type X 86-based PC
  Processor AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2200 Mhz, 2 Lossnay, 2 logical processors
  Version/Date Phoenix Technologies, LTD 5.13, 29/10/2007 BIOS
  SMBIOS Version 2.4
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.0.6002.18005".
  Username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 2.00 GB
  1.87 GB total physical memory
  Available physical memory 775 MB
  Total virtual memory 3.99 GB
  2.49 GB available virtual memory
  Page file space 2.17 GB
  Paging file C:\pagefile.sys

  HP Pavilion a6000n specifications

  Before that I inform you of why 4 GB will not work, I will inform you of the steps, I took in coming to my conclusion.

  First of all, I found an old PCI VGA card and installed.  Then I started the installer and changed to display pci dashboard.  F10 save and exit.  I left Vista find the new hardware and drivers.  Power off and swapped the cable from the monitor with pci card.  Restarted.  Last good known Configuration.  Made to the desktop with large icons, display etc.  Power off.  Installed all four modules of memory of 1 GB.  The installer confirms the mms of 1 GB in all four banks.  Save and exit.  A frozen fourth passage on the starting Windows progress bar screen.  Display is now less than a hundred multicolored pixels (it looks like stars in the night sky) scattered across the screen with barely perceptible ms inside progress bar.  Killed power as no response to input devices.  Modules removed from DIMM0 DIMM2 (banks 1 and 3) and installed two 512 MB mms instead.  Power, entered installation.  Confirmed 1 GB, 512MB, 1 GB, 512MB in DIMM0-4 (banks 1-4).  Save and exit.

  Eureka!  Starts directly on the desktop with no complications.  Vista even automatically the Resolution 1600 x 900 display value.

  Power off.  Remove the PCI card.  Has changed from the monitor to the integrated connector cable.  Powered on the Setup where I changed the display on board.  Saved and get out.  Straight to the desktop.  All right.  Vista indicates on the installed 3,072 GB 3.0 GB.

  I had read a useless article on the HP Forum that said that HP had made disappear the memory alternative banks.  Thank you for that.  Thanks kaoutar to straighten me out on this.

  After studying the limits of memory on Windows os systems, I made a discovery.  Due to the limitations of physical or software address, Vista cannot use 4 GB RAM in the 32-bit operating system.  You must install os 64 bit where it can use 8 GB to 16 GB.

  Here are a few discussions of support, I found to cooberate my conclusion that 4 GB will not work on this computer, as this is with Vista 32 bit installed.

  Thanks for the reply and assistance Erico.  Installation of Bank alternation of RAM modules corresponding coupled to the reduction of two of these 512 MB back is the solution.  It was an error of installation of equipment so many restrictions imposed by hardware and software manufacturers.  If I or anyone else, wants more RAM under Vista or 7, will need the 64-bit versions.

• My HP Pavilion a6000n cpu upgrade

  I got this hp Pavilion a6000n friend and I basically rebuilt this computer, but I'm not sure what CPU I can go to. I've been watching this cpu for my computer. I am running windows 7 64 bit. This upgrade of the processor is possible for my computer?

  Edit: I also watched this cpu, if the other cpu is too powerful.

  Here are the specifications of your HP Pavilion a6000n desktop computer and its card mother M2N68 - LA (narrated). Based on these specifications, this model supports the following processors;

  Type of socket: AM2
  TDP: 89 watt
  Athlon 64 X 2 with Dual Core technology up to 5600 + (up to 89 watt)
  Athlon 64 4000 + less than
  Sempron less than 4000 +.

  Neither the processors you listed works on this computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Pavilion 1226nr: need bios password recovery

  I just bought a refurbished 17 laptop computer 1226nr HP pavilion with a bios password hashing is (D567ADAF) Please help

  Hello

  Your laptop is to produce a code hexadecimal halt which is stored in the ram as a 'one stop' and is recalculated after a reboot.  This indicates that you have a FRIEND bios later and unfortunately none of the current code generators will work - surprisingly, you can usually always remove power on password of the machine by removing the cell RTC (leave the connected Power Board) then hold down the power button for 60 seconds before reinserting the RTC.

  The bad news is that the RTC is on the 'wrong' side of the motherboard so is going to require a lot of disassembly - see Page 92 of your Maintenance & Service Guide.

  Kind regards

  DP - K

• Pavilion 23-b026 BIOS problem

  Pavilion 23-b026 BIOS does not boot EFI of CD/DVD. Even if the start-up devices entry is edited and saved, ATAPI CD/DVD does not appear in the list of boot devices the next time. Is there any BIOS UEFI editing tool?

  (this to make Windows 8 PC + Linux dual boot)

  It turns out that, UEFI boot loader needs FAT32 file system to read the startup file EFI, where the CD/DVD is excluded. USB-disk/pen drive is the option.

  I burned the ISO on usb disk linux & can boot the system into EFI him! Has successfully installed Linux & Win - 8 + Linux work correctly in dual-boot mode.

• Pavilion DV7-3060us: BIOS restore file "not a win32 application invalid" (Pavilion DV7)

  I have an intermittent (about 19 times out of 20) on a Pavilion DV7-3060us BIOS failure.  After that you press power, the fan and the light turns on, the screen remains black and lock/num lock flashing twice, pause, flash twice, etc..  Sometimes, the computer will boot normally to Win7.   Near as I can understand, I need to reflash the BIOS.  I downloaded the image file winflash/BIOS (SP47531.exe) the drivers and software page, but when I try to run it, I get a "...". not a Win32 valid request"message.

  Any advice on how to get this file to run it, or another method to solve the failure of startup issue, would be very much appreciated.

  So much worse... apparently the problem is I downloaded the file through Chrome.  Downloaded with IE on another machine, recorded on a USB key, it connected the USB on the machine of problem without difficulty.  Does not seem to have solved my problem starting, but the 'valid not a Win32 application' error has been resolved.

• HP Pavilion A6000N Panel before wiring diagram

  I was fixing a friend out of warranty HP Pavilion A6000N desktop and had to replace the motherboard. I installed the Asus M2N68-AM Plus mobo which is very similar to the Council of M2N68 - LA used in the original. Only problem is that I still was able to find a diagram pinout for the reader of card usb/audio/power front panel so that I can return his pc to him. Any help with this would be greatly appreciated that I tried to stick to the closer the original as humaly possible specifications.

  Here is a link to the zipped Manual:

  http://freemanualonline.blogspot.com/2011/03/ASUS-M2N68-am-plus-manual-user-guide.html

• HP Pavilion a6000n - improvement of the system. Need help with the decision and suggestions

  Hi all

  I have a HP Pavilion a6000n, spec even with this link , except that I have 3 GB of memory and Window Vista Home Premium 32-bit.

  I think to update some of my computer hardwares that can run more smooth in some games and to improve my gaming experience.

  I'm looking to replace the processor and graphics card.  At the present time, I have an AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2.2 and a NVIDIA Geforce 6150SE nforce 430.

  My price range is around $100-$200 for processor and graphics together.

  I looked at cela processor and graphics card

  They will make a big difference and improvement than what I have at the moment?   If this isn't the case, then can you guys give me some suggestions on the choice of the better ones out there?

  Thank you!

  You have only a 300w ATX PSU (Power Supply Unit), then you will need to update if you plan to install a good graphics card.  Check the manufacturers minimum power required for the card you decide on getting.  As for the CPU, it does not require the upgrade - the graphics card is what causes your performance problems (in the games).  I would like to spend more money on a power supply and graphics card and leave the CPU alon (so far )

  Message edited by Kalt on 05/12/2008 23:18

• My Pavilion HPE h9 - 1120t Phoenix Bios does not display Options for virtualization technology

  I have a Pavilion HPE h9 - 1120t Phoenix with Intel Core I7 - 3770 k and Windows 7 Professional 64-bit operating system.

  I checked that my CPU indeed does support virtualization technology, and it does according to Intel. However, when I try to run a 64-bit VM in VM Ware player, I get this message: "the host is capable of VT, but VT is disabled.

  When I checked the BIOS to enable VT, I have been unable to find a setting for VT option can I update the BIOS to use VT?

  Hello:

  Have you checked in the Security menu Security / Unit of material?

  This is where the adjustment would be if she has one, and it is disabled by default.

  Paul

• HP Pavilion a1767c: update Bios / graphics card

  Hello, I have problems finding the update of the bios (download) for my computer, I looked everywhere in the 'hp' site and I can't find all downloads for the bios. Recently, I have re-installed and updated my graphics card because it wouldn't run hardware acceleration or all the games that I tried to start, so now whenever I start my computer it crashes during startup, but once I'm in safe mode and disable My Nvidia GeForce 7350 the my computer starts up fine but my graphics card does not work , I searched up to via internet for this problem and what I saw, is that I need a bios update for my updated graphics card work properly. My current bios is {Phoenix Technologies, LTD. 5.08, (12 / 8/2006)} I'm looking for is the download link for {P5LP - THE Motherboard BIOS update, Version: 5.23, (August 26, 2011)}. I read that you can get the update on the site of "hp", and I'm not. If someone could help I would be happy to apprectiate, also if you think I'm doing something wrong or the wrong in the resolution of this problem please let me know, thanks!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please update the necessary BIOS using the link below:

  http://support.HP.com/IE-en/drivers/selfservice/HP-Pavilion-A1000-desktop-PC-series/3339280/model/3356599#Z7_3054ICK0KGTE30AQO5O3KA30R1

  The link above, click on the BIOS and expand it, you see the version (5.23 1.6 MB August 26, 2011) you are looking for.

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GR1

  Although I am an employee of HP, I speak for myself and not for HP

• Phoenix BIOS crashes, cannot run BIOS

  Pavilion Media Center 8300f w / Phoenix Award BIOS v6.00 PG (1987-2007) and Windows Vista

  Constant freezes and crashes when you run Windows Vista, and as he tried to reinstall Vista inspired me to experiment with my laptop Dell Windows 7 installation disc (before buying another Windows 7).  I installed Windows 7, but the 2nd restart, BIOS seems to be completely DISTROYED (such as BIOS code that is executed before the frost line).  I can still run MS-DOS.

  What can I do now?  How do I Flash the BIOS so I can't even the configuration of the BIOS screen?  Also, where can I get an update of the v6.00 BIOS (which never worked well in any case)?

  Thank you

  Confuscated

  Solved using the clearing BIOS settings

  Clear CMOS, follow these steps:
  (1) unplug the power cord.
  (2) temporarily the value jumper CLR_CMOS_HP pins 1-2 pins 2-3.
  (3) to start the computer and BIOS now works very well (but still no Windows 7).
  (3) force stop and unplug the power cord.
  (4) rider CLR_CMOS_HP reset to pins 1-2.

  Good information on the HP site:
  http://support.HP.com/us-en/document/c01077676

  Now I need an operating system that is running on this computer.

  Anyone use Linux OS and the KDE Plasma?
  http://en.Wikipedia.org/wiki/KDE_Plasma_Workspaces#desktop

  Confuscated

• Pavilion dv7: Dv7 bios password

  Hello, I try to access the menu of the bios on my Pavilion DV7 laptop. The stop code 86966802.

  Thank you.

  @MtGorilla

  Enter 39644224

• HP pavilion p7-1455: bios password for HP 675852-001 MS-7778

  I'm locked in bios and cmos of the clr and the pwd clr headers remove not the password on that they just put a factory password and I don't know what that password is, I also tried to remove the battery of the bios twice once for 30 minutes and again one or more nights , but I always ask me for a password only anyone know the bios password using this motherboard.

  motherboard: http://support.hp.com/za-en/product/HP-Pavilion-p7-1455-Desktop-PC-series/5295962/model/5297088/docu...

  Hello:

  The clr pswd did not work is because the instructions you have seen are incomplete/incorrect.

  I have rewritten them below, and that should take care of the problem...

  To clear the password BIOS follow these steps:

• Pavilion p7-1074be: BIOS power on password not recognized

  Hello
  
  We have a p7-1074be pavilion desktop computer.

  We had set the market empty password (BIOS).

  Turn on the computer, however it says the password is incorrect.
  After three attempts, it shows a symbol representing a star *, but not give not any code.

  Restarting the computer re - allows three attempts.

  We tried the following:

  • Previous passwords, with or without shift caps lock, Numlock...
  • Reset the BIOS using the CMOS jumper.
  • Reset the BIOS by removing, waiting and replacing the CMOS battery.

  but none of that works, the computer always requires a password to market and still refuses that we set.
  
  Is there another way around this problem?
  
  Thank you for your help.

  Hello:

  Please read the info on the link below under the compensation password settings... Last listed item.

  There is a password jumper and a cmos jumper.  You must move the password jumper.

  http://support.HP.com/us-en/product/HP-Pavilion-P7-1000-desktop-PC-series/5080737/model/5223243/document/c02668523/

• HP Pavilion Dv6: Administrator BIOS password required after the crash of hard/replacement drive

  Hello

  Hard drive has crashed, installed replacement. Try to check the HARD drive in the BIOS and I'm stuck to the administrator password screen.

  Device: HP Pavilion Entertainment PC laptop dv6

  OS: Win Finally 7 new

  Error code: 54820996

  Thanks for any help!

  @hp-laptop-noob

  Enter 41788318

  Kind regards

  DP - K