M9452p Pavilion lock, restart the HP splash screen and freezes

Similar Questions

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Pavilion h8 - 1070t: blocked on the HP splash screen, computer beep

  I just installed a PSU Corsair CX600 and an EVGA GeForce gt 740.

  When I start my PC, is rest on the start screen and beeps once, every ten seconds. After 3 beeps (30 seconds) my PC beeps again followed three quick beeps and the monitor stops receiving signal from the computer (I do not see the HP splash screen, no signal).

  What could be the problem?

  I think that your problem is that the video card is not compatible with your BIOS.  EVGA 700 series cards require UEFI in the motherboard instead of a standard BIOS.  I suggest you to contact EVGA Tech Support (1-888-880-3842) to see if they have a VBIOS update that will allow the card to work with your computer.  If they do not have an update that they can email it to you.  Tell them that someone of the HP Forums suggested that you call.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• T400 suddenly won't boot beyond the ThinkPad splash screen

  .. .only visible indicator of a problem is that the drive activity light on the bottom of the screen stops ignition etc when the ThinkPad splash screen appears. No bumps in the system, no unusual activity to suggest physical damage to computer laptop or disk - started very well in the morning on the desk, would not restart from the same location on the office after lunch. System also won't start on a bootable system disk (but you can hear the drive access). System is less than one year.

  I solved my problem: Lenovo Service Center for repair under warranty here a diagnosis nor a bad mother and a bad battery, due to abuse of the handling, etc. the computer could suffer (it seemed to be a factory default). No indication as to whether one or the other 'bad' component caused the other to fail. in total 48 hrs to repair, most of the waiting time for a new motherboard coming in the night. No charge to me for what it is. Life goes on.

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• Sizes of Splash screen and names for the iPhone 6 and 6 more in the file descriptor xml files

  Is anyone know the sizes of screen and the file names for the iPhone 6 and 6 more (for the descriptor xml file)? Or current splash screens works on both devices?

  i.e. Default-Portrait.png *-768w x 1024 h

  Hello

  Here is the specification.

  iPhone 6	Start screen	750 x 1334	72	[email protected]	Resources or resources/iphone
  iPhone 6 more landscape	Start screen	2208 x 1242	72	[email protected]	Resources or resources/iphone
  iPhone 6 Plus portrait	Start screen	1242 x 2208	72	[email protected]	Resources or resources/iphone

  You can find more info here - http://docs.appcelerator.com/titanium/3.0/#! / guide/Icons_and_Splash_Screens-section-290048 97_IconsandSplashScreens-Splashscreens

• I get the windows login screen and I do not know the password for administrators

  I accidentally deleted my account and when the computer starts and I get the windows login screen and I do not know the administrators password. Also how can I reinstall windows when I got a disc when I brought my laptop. Thank you, Lorraine

  Thanks for getting back to me. I sold my old laptop to my son-in-law, and he asked me to remove my name from the computer off so that my name wasn't on the screen all the time. so I deleted the profile of cook of lorraine and made one for him, but I didn't give it a password. then I realized what I had to do (I got Lorraine where time is on the bottom of the screen), but was unable to highlight to remove it without a mouse. so I plugged a mouse, but the computer does not read, then I restarted the computer. When I restarted, all I could get was the windows login screen.

  then I typed in the name son-nlaws and they said that he was kidnapped, tyoed in mine and got the same and then typed in Administrator, but did not know the password. I have since reinstalled windows. XP Professional would not install saying a file was missing, so I installed xp family and is working again. He just has to click on what edition it wants to run. Professional XP of course happen just with the display of connection... but it can use again.
  Thank you once again, Lorraine

• iOS, splash screens and icons are not included

  Hello

  I'm having a problem where not all the splash screen and icons are included when building for iOS. Ipa package generated by Phonegap Build does not use the screens provided for the following sizes:

  750 * 1334

  1242 * 2208

  2208 * 1242

  640 * 960

  In addition, the icon 76x76@2x~ipad (152 * 152) is also not included, but is rather just a black white icon (see below).

  

  The icons are included in the file of configuration as follows:

  < platform name = "ios" >

  <!--> iPhone and iPod touch

  "< splash src="splash/ios/Default.png "width ="320"height ="480"/ >

  "< splash src="splash/ios/iphone_landscape.png "width ="480"height ="320"/ >

  "< splash src="splash/ios/Default_at_2x.png "width ="640"height ="960"/ >

  "< splash src="splash/ios/iphone_landscape_at_2x.png "width ="960"height ="640"/ >

  <!--5 iPhone / iPod Touch (5th generation) - >

  "< splash src="splash/ios/Default-568h_at_2x.png "width ="640"height ="1136"/ >

  "< splash src="splash/ios/Default_iphone5_landscape.png "width ="1136"height ="640"/ >

  <!-iPhone - 6 >

  "< splash src="res/screen/ios/Default-667h.png "width ="750"height ="1334"/ >

  "< splash src="res/screen/ios/Default-Landscape-667h.png "width ="1334"height ="750"/ >

  "< splash src="res/screen/ios/Default-736h.png "width ="1242"height ="2208"/ >

  "< splash src="res/screen/ios/Default-Landscape-736h.png "width ="2208"height ="1242"/ >

  <! - iPad - >

  "< splash src="splash/ios/screen-ipad-portrait.png "width ="768"height ="1024"/ >

  "< splash src="splash/ios/screen-ipad-landscape.png "width ="1024"height ="768"/ >

  <! - iPad retina - >

  < splash src = "splash/ios/[email protected]" width = "1536" height = "2048" / >

  < splash src = "splash/ios/[email protected]" width = "2048" height = "1536" / >

  "< splash src="splash/ios/Default-Portrait.png "width ="768"height ="1004"/ >

  "< splash src="splash/ios/Default-Landscape1004.png "width ="1004"height ="768"/ >

  <!-retina iPhone 6 s more, iPhone 6 more - >

  "< splash src="splash/ios/Default-i6plus-Portrait.png "width ="1080"height ="1920"/ >

  "< splash src="splash/ios/Default-i6plus-Landscape.png "width ="1920"height ="1080"/ >

  <!--12,9 inch iPad Pro->

  "< splash src="splash/ios/Default-iPro-Portrait.png "width ="2048"height ="2732"/ >

  "< splash src="splash/ios/Default-iPro-Landscape1004.png "width ="2732"height ="2048"/ >

  < / platform >

  I confirmed that the files are present in the zip uploaded to the build server. I am also using the latest plugin splashscreen configured as follows:

  < plugin name = "cordova-plugin-splashscreen" source = "MNP" / >

  My app ID is 1059690 and I'd appreciate any help.

  Thank you

  Ed.

  melb101 Just curiously, have you checked that your startup files are folders that you specified as sources.

  Some have

  and the ones failing have

• How to keep the Macbook pro screen and cin on position?

  How to keep the Macbook pro screen and computer in position 'on '.  I don't want the computer shuts down or cut unless I ask him to...

  If you talk to keep your machine to fall asleep, take a look at the caffeine.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• When I closed my Windows Vista computer, it reached the "Logging Off" screen and seems stuck.

  Sporadically, when I turned off my computer, it reached the "Logging Off" screen and seems stuck.  I walked away from my computer for a returned more than an hour to find the screen always showing "Logging Off" with the small circle in the middle of spinning.  The only way I can close down is to do it manually and then when I use the computer at a later date, I ger the message that my computer has been shut down improperly and I should log in safe mode.  This happened only since I upgraded to Windows Vista.  My computer is a Toshiba laptop Satellite P105-S6147.

  original title: Shutting Down computer

  Hello

  Please, try the suggestions made by the former MVP Malkeleah in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-stuck-at-logging-off-screen-after-trying/d99659e2-03d4-4b18-b3f1-cba3a438f07e

• I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please advise...

  I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• Hi I am currently subscribed to PS CC but I don't think I have the latest version.  I believe this because I do not get the new Welcome screen and no new feature as structure and color in the content aware patch tool.  I checked for you

  Hi I currently have a subscription to the CC PS, but I don't think I have the latest version.  I think this because I don't you the new Welcome screen and do not have new features such as the structure and color in the content aware patch tool.  I checked the updates and it tells me I have the current version.  I check in PS I version 14.2.1.  I also have CS6 installed on my PC, it could be somehow be do something or I'm doing something wrong.  Anyone have any suggestions.

  It's under 'find new applications '.  You must scroll down to see it.

  

• How to get around the main navigation screen and connect to different responsibilities

  How to bypass the main navigation screen and connect to the home page of different responsibility directly?

  Hello

  Update of "User Preferences" on the home page.

  Navigation:

  -Entrust--> region 'Start Page' desired preferences;

  the user will be accessed directly to accountability.

  Kind regards
  skannegulla