HP Pavilion dv6 3166eo and Radeon HD 5650

Similar Questions

• HP pavilion dv6-6150sl and I need to find drivers

  Hi, I bought a hp pavilion dv6-6150sl and I need to find the drivers for it, can someone please help me thank you, im using win7 64 bit

  All the drivers for your model that are compatible with Windows 7 64-bit can be downloaded from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5144860

• I have a HP Pavilion dv6-2088dx, and the power light flashes constantly, that means?

  Help.

  I have a HP Pavilion dv6-2088dx and have had for a little less than two years now.  About 8 months ago, I replaced the original battery with a long life Rayovac battery.  Recently my laptop power light has been constantly intermittently to about 1 flash every 2 seconds, regardless of the level load and/or if its plugged to the power source.  What exactly my computer is trying to tell me?  Thanks for the help in advance

  -Kyle

  I found the link to your question.  I hope this helps.

  http://h10032.www1.HP.com/CTG/manual/c01884775.PDF

  

• HP Pavilion dv6 issues with Radeon HD 6770 M

  Hi, I had this problem with my PC.

  I have my Radeon HD 6770 M who always seems to miss, and sometimes (in the driver manager), it has a small yellow triangle and contains an error. At the moment it doesn't have an error, it says it works fine, but every game I try the computer is forced to use the Intel HD Graphics, because it cannot find the Radeon. I solved once the problem, when I discovered that a lot of HPs have a problem with the compatibility with the Radeon and I needed a plu tweeked update from HP.com, that would be compatible.

  That solved for a while, and my games might even have better graphics without slowing down (now, he collaborated with the Radeon instead of the single Intel HD). But today, I was about to start playing the game Deus Ex, and before you start, he asked me what graphics card I wanted to use, what brightness and Hz how I wanted to, and in the graphics options, she had that Intel and the Radeon are not the case to be found, and all the graphic now weaker need games to work fluidly (the graphics were lowered for some time but only today with this) Guest did I connect points and went it was again the Radeon).

  I thought maybe the update again on HP.com, but I can't find my computer in the list.

  All I want is to be able to use my best video card and update without worries.

  How can I solve this?

  Sorry for such a long speech, here is some important info.

  Product: HP Pavilion dv6-6b60ep (product: AB6 # A6L28EA)

  OS: Windows 7 Home Premium 64-bit

  Thank you.

  Hello GuilhermeCosta,

  You are experiencing a problem with your graphics card does not properly.

  I do not know what settings have been changed before you were asked to select the graphics you want to use. It could have been an update that caused the problem start.

  Here is a link to the graphic updates for your system.

  You can also run a system restore.

  This will bring the system back to when everything worked correctly without affecting any of your personal files.

  Here is a link on how to do a restore.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• HP Pavilion dv6-6b56er and Windows 7 x 64 Professional

  Hello.

  I bought Pavilion dv6-6b56er with pre installed Win7 x 64 Basic, which is not convenient for me, because of its lack of features. So I made a full backup of the hard disks in the Pavilion and removed all software it. Then I installed Win 7 x 64 Pro and facing difficulties regarding the drivers of USB 3.0. Everything else works fine. I know that HP is not responsible for all of the experiences with the software that is not pre-installed, but I have a few questions.

  First of all, should what driver I install to ports USB 3.0 flag? To the download page, I found three different options:

  1 Renesas.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99763-1&cc=us&DLC=en&LC=en&...

  2 NEC.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en...

  3 fresco.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102204-1&cc=us&DLC=en&LC=en...

  and

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100237-1&cc=us&DLC=en&LC=en...

  The first two were installed (I mean they CAN be installed), the third - not at all settled. So what is the reason to put it on the download page?

  We're crazy. When you try to install the package with driver NEC, installation master tells you, that it is pilot of Renesas. There therefore no NEC drivers on the download page at all. Why I paid so much attention to it? I installed Everest, so I know what driver is needed. He tells me that I "NEC uPD720200 USB 3.0 Host Controller". Thus, there is no driver available on the download page for NEC chipset and we have NEC chipset inside.

  During this time, Windows Support Center offered some NEC USB 3.0 driver (http://ftp.hp.com/pub/softpaq/sp47501-48000/sp47677.exe ).

  So, who's right?

  The second question. If attempts to connect to the USB 3.0 a compound device (e.g. usb hub), then in "devices and printers" appear strange devices with the label "no data". If Renesas driver has been installed then ' USB 2.0 hub "appeared, and so Windows proposed NEC - then «NEC Electronics USB Hub» The County of strange devices depend on the number of devices connected to this unit composed. It's my main problem - these strange devices.

  So I came to a dead end. Any ideas to fix this?

  Any response will be appreciated.

  PS. Sorry for my bad English.

  The Recovery Manager is indeed on the hard drive. The version that is on the dvd discs doesn't have as many options as the original get the version of the partition.

  If you use recovery factory reset it will install all the original drivers and also recreate the recovery partitions. After finishing of the recover and have restarted the PC, you should be able to use the F11 key to access the hard disk again.

  You will need to reinstall the UEFI utility using the download from the section web software support and drivers under utility-tools. Given the usefulness of UEFI hard disk is a good thing.

• HP Envy m6 and HP Pavilion dv6: Bluetooth and Webcam on my two computers

  Hi, my name is Frank, how do you!    I posted this elsewhere as well for maximum exposure!  That is why it says that I just discovered your post but anyway: it's here >

  I just discovered your post response and I have a similar problem (the reason I'm here looking, Eureka!) so I thought that I would like to take this opportunity to ask, if you allow me to my situation.

  I bought my computer a little before 12/25/2012 at BestBuy.

  It of a laptop of HP Envy m6 with original 8 Win 64-bit free upgrade to Win 8.1 last year and is about to pass to Win 10 when it was released! Yes!

  Product number is C2N76UA #ABA

  BIOS is F.26

  Motherboard: 18A 4 73.50

  GRAPHICS CARD: GPU Intel(r) HD 4000

  Microprocessor: Intel9R) Core (TM) i5 - 3210 M CPU @ 2.5 GHz

  Operating system: Windows 64-bit upgrade 8.1 soon to be upgraded to win 10 64 bit!

  Memory: Two 4 GB Samsung 1600 MHz for 8 GB Total 

  l would like to know if the PC above was supposed to come with Bluetooth or not? and if not, if I could buy an adapter thru HP? who would do it works through this PC

  (I also have another older PC HP laptop Pavilion DV6 with Windows 7 service pack 2 (later) that I would also have Bluetooth adapter)

  (This Win 7 PC has broken built in WEBCAM I need to fix at some point, advice on this issue?)

  YES, I KNOW I STARTED THIS QUESTION ABOUT BT!   Anyway, I can't get built in webcam wanting to work more, it allows to work so after researching, I probably have to send it to HP (diagnostic research and trial and error to internet) for repair or buy an external (which is undesirable) but anyway:

  (if you can shed some light on this topic, I would appreciate it because I'm here asking questions anyway for efficiencies sake!)

  Or buy a new computer, haha, I don't really need except for this integrated feature and maybe the touch screen... (I'll probably do that if it is not repairable.)

  Sorry for being verbose but I wanted to take this opportunity to get rid of all the problems I've seen all at once and spend so much time in the research and diagnosis and try to troubleshoot and fix my computers instead of just using their...  The computers sometimes can be a waste of time, you know.

  I really want to use to be productive not only to maintain so I really appreciate any help I can get on it.

  Thanks in advance if you take the time to answer, and if the appropriate solution is provided, I'll be sure you shower with braces and others and you honor as a true expert!

  Bravo. Congratulations to give, hurrah!

  Thank you and I'm waiting... (s) to more than 3 numbers!

  Sincerely,

  Your internet friend,

  Frank H

  PS: I will monitor your response, thank you! : bravohelen: hmm no showing emoticon...

  Hi, Frank:

  Your Envy laptop does not come with built-in bluetooth to the specifications of the product on the link below.

  http://support.HP.com/us-en/product/HP-envy-M6-notebook-PC-series/5296045/model/5312259/document/c03489413/

  If she had come with built-in bluetooth networking, this feature would be are indicated as well as WLAN 802.11b/g/n wireless connectivity specifications.

  I bought this external usb bluetooth adapter for my HP desktop computer, and it would work very well any laptop too.

  http://www.Amazon.com/Kinivo-BTD-400-Bluetooth-4-0-adapter/DP/B007Q45EF4

  Unfortunately, I wouldn't be able to help you with the problem of the webcam.

• Portable printing and Scaning between an HP Pavilion dv6 PC and F310 HP all in one printer / Scanner

  I'm trying to interface a new HP laptop that has a 64-bit (HP Pavilion dv6-701) operating system and running the operating system Windows 7 on a HP All in one series F310 printer / Scanner

  HP staff helped get printing to work via a 6980 HP printer Driver software download, try to download the software 310 driver didn't work so we tried this driver 6980 credits and print function works now

  However I can't scan a document on the laptop of the 310, when I attmpt one scan, I receive an error message

  Given that the printer uses a generic driver and is not a software that is supported on Windows 7, you can scan only programs such as paint, Windows Fax and Scan and image viewer.

• Pavilion dv6 1115 - and: hardware upgrades replacements

  Salvation;

  I want to replace my optical drive for an ssd, my computer model pavilion laptop dv6 1115 - and. I'm looking for models of cart, and I wonder what kind of shopping carts are compatible with my laptop. There is difference between the models milimeter. I don't know if it's only important variable dough. Awaiting your response

  with regards to the King.

  I will warn that generally placing a SSD in an optical drive caddy is not a good idea. The interface for the optical drive is different and slower than the interface for the main hard drive. This means that the additional cost of an SSD will be wasted if you put in that kind of caddy. You're better off putting a standard mechanical drive in the optical caddy because it will run just as fast as an SSD or very close to him.

  That said, the caddy you want is this:

  https://www.jacobsparts.com/items/HDDBAY-01/

  It is a 12.7 mm optical drive if you need a shopping cart of 12.7 mm, which will hold a 9.5 mm or 7 mm hard/SSD drive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion dv6-6077er and Windows 8

  Is - this HP is going to add Windows 8 x 64 (as pilot) support for HP Pavilion dv6-6077er laptop? If so, when?

  Hey Alex.

  Try your luck here

  http://Forum.NotebookReview.com/HP-drivers-software-Forum/556469-drivers-HP-DV6-4xxx-DV6-6xxx-dv7-5xxx-dv7-6xxx-envy-14-2xxx-envy-17-2xxx-Intel.html

• Pavilion dv6 - 1253cl and Win 7

  I installed Windows 7 on my Pavilion dv6 - 1253cl without problem until I had to use my printer HP C3150 all-in-one to scan a document. Now, I find that the HP Solution Center does not detect my printer. The printer works fine printing from applications, but when you try to scan from the solution center it does not detect the printer/scanner. Y at - it a update for the HP Solution Center work with Windows 7?  Thank you.

  There is a Windows 7 compatible driver for your printer. You can download it from the following link:

  FTP://ftp.HP.com/pub/softlib/software11/COL30154/MP-74950-2/AIO_CDA_NonNet_Full_Win_WW_130_140.exe

• I have a Pavilion dv6 laptop and I want to upgrade the graphics card

  I'm the product: HP Pavilion dv6t - b 6, 00 CTO Quad Edition Entertainment Notebook PC

  Product number: QJ912AV #ABA

  Operating system: Windows 7 Home Premium (64-bit)

  Graphics factory-installed: Radeon HD 6490 m + Intel(r) HD Graphics Family (but I spend the Intel 3000 drivers)

  My graphics were problems since I got my laptop and I didn't realize what a few months after when I did a check on why my graphics running on low FPS. I called customer service and they could not solved the problem, so I started to do the research and updating my drivers for each of them and switching them too. I have finally fixed them and instead to run Minecraft on 22 FPS, I was there at more than 60 FPS.

  Now, this graphics card is good and all, but there are not adapted to the new games (and I've had this laptop 1 year). What don't get me, is why HP installs some old graphics chips in a new laptop. in any case, I want to see what I can put in the new card. I really want to install and Nvidia 650 m, but I don't know because I don't have any information on my motherboard and it is manufactured by HP. Why I want to improve it is because that 1.) This chip sucks and can't play the games of 2005 and more than 2). He cannot run newer games like I'm a player PC of BF3. I get a strong brand of 28 FPS on BF3-ultimate low quality on this game, he reached sometimes 30 but not much. I want this thing to run as good as my game desktop computer that is custom built, so I really want to know what works with this laptop.

  Please help me to know what works so I'll be better satisfied with HP products.

  -Spencer

  Read this document. This has been implemented by one of the community experts (erico).

  The answer is usually going to be no upgrade that has been done on the graphics card as this is usually soldered to the motherboard and designed to work with specific chipsets. The fact that this example uses the switchable graphics actually still less likely. I'm sorry.

  PC hardware is changing at a rapid pace, so you get a day probably will be obsolete in a few months if not sooner. I personally ordered a laptop and there was already a new model of the series which has a better processor and graphics card to this topic. Alas, I was outside the return period and could not take advantage of the new model.

  This largely depends on the software used, but cell phones are not usually able to achieve the same performance as a desktop game PC. My laptop performs as well as my office during playback of half-life 2, but there is a big difference when I play Crysis. The experience will depend on how the program is written and how the game engine is optimized. It varies from game to game.

• HP Pavilion dv6-6119tx: AMD Radeon 7400 does not!

  HII I have a HP dv6119tx notebook pc with amd radeon HD 6490 m. When I upgraded my OS from Win 7 HomeP Win8 pro graphics changed in HD 7400 m and its does not work. When I check through Device Manager, indicated by a yellow exclamation on amd driver. When I try to update the driver, it instructs windows already installed the latest driver. I then tried the amd auto detect tool to update the driver. But the downloaded file does not work in my system. So now how I do my amd gpu work and get switchable graphics

  Hello:

  Use of the W8 amd graphic driver for this model.

  Uninstall all the drivers you have tried everything first and reboot before installing this driver.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp59850.exe

• Pavilion dv6 slow and non-responsive

  Hello

  I have a pavilion referbished with Windows 7 about 6 months ago and for most of the time it worked great. However, one day he gave me an error message during start-up by saying he could not start and that he should try again. I have yet to get this error, but since then he acted weird. It starts normally and the first first seems normal, if there might be a little slow. However, after about 10 to 20 minutes of use, it will start to slow down the hydro-huileuses gel and effectivly upward. I can still control slider, but most of the programs are no longer.

  Three other things:

  (1) Norton will not open, even if I try as soon as the computer starts when everything else works fine

  2) unless I try immediately after start-up computor not restart or shut down. The icons will disappear, but it does not start to close. It also has problems going in the Task Manager after the first few minutes.

  (3) it works perfectly in safe (at least relitive in safe mode) mode.

  What I've done so far:

  I did a full scan of malwarebytes: he found nothing but during the scan, a message saying poped windows is maybe damaged.

  I called Norton:  I tried to figure out why it wouldn't boot up normally and it does not work in SafeMode (which is dumb). They had me run another program designed to run in safe mode, what did not and could not help me with another problem.

  I did a system restore- it did nothing

  I did a scan of the memory- he also found nothing

  I called windows tech sup port - they were completely unhelpful and told me to talk to hp

  I went to h p sup port: I did a scan of the missing drivers and found I was missing an update of the BIOS. I installed it and it seemed to help at first, but the probblem remains.

  I think that there is a driver, or something on windows which is corruppted, or else I have a virus that is very well hidden. Unfortunettly my simptems aren't enough destinct for google - able. Is their no way to deal with this, without having to reinstall windows?

  In addition, you seem to be able to pass Windows 7 ro 8 without losing data (or vista to 7), can do you a re - install any without losing files. If I have to reinstall some programs it is very good. I know it must be something that I ask micrcosoft, but as I said they were completely useless and told me to check with hp.

  Hello Wigmy.  I understand that you are having problems related to slowdowns, ultimately makes the phone unusable.  Is this correct?

  Honestly, it seems you did a very good job to go beyond the usual suspects.  You did a scan for viruses and malware, with no luck.  Make sure that all drivers are up to date, and who had no effect.  You also tested the memory, and it passed.

  I see a little more possibilities here.  A possibility is that the hard disk contains errors, then you will want to check that as well.  Another possibility and one who seems more likely to me is that some of the system of the operating system files are damaged or that you are indeed infected with a stealth virus.  I think that this second option is the culprit, due to the fact that the laptop works very well when it is started in safe mode.

  First, make sure that the disk hard past the built in hard drive test.

  1. Reboot the laptop.
  2. Until the BIOS loads, press F10.
  3. Under Diagnostic Tools Select Hard Drive Test and let it run.
  4. Display the result.

  Once we exclude the corruption/problems with the hard disk, the next step will be to do a full recovery of the machine.  , You will lose all data that you do not back up.  The Recovery Manager will be an option allowing you to back up your files.  However, you can start in safe mode and save a USB key or external hard drive as well.

  Here are the steps for recovery.

  1. Restart the PC.
  2. Press F11 during boot up until the Recovery Manager starts to load.
  3. Select "System Recovery" and follow the instructions.
  4. Allow the recovery complete and verify that this solves the problem.
  5. Display the result.

  I hope you find this useful!

• Pavilion dv6-6c40se and support the blu - ray?

  Hi all

  can I use discs blu - ray on my [dv6-6c40se], as the manual says I can, but the image of the laptop on this manual (and I don't know it's wright for my laptop manual) have a fingerprint on it, but not mine

  Maintenance & Service guide shows three possible configurations for series books model dv6.

  (1) Blu - ray Disc ROM FX SuperMulti DVD±R/RW Double -.
  Control layer

  (2) R/RW SuperMulti FX Blu - ray player

  (3) SuperMulti DVD±R/RW with Support Double layer

  If your player will not play BluRay discs, then your a #3 is installed.  You should try to play a Blu - ray disc in the drive. This way you will know for some.

• Pavilion dv6-6145dx and Windows 7 - touch pad sensitivity

  Cannot type without cursor jump around randomly. I looked for the setting parameters and they do not actuall exist. HP chat support has been no help. They suggested downloading the new configuration BIOS and still questions. Thanks for your suggestions.

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52661.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Let's see now if you have the possibility to set the sensitivity to the touch - this is described in the document at the link below under the heading 'Set touch sensitivity'.

  Configure the ClickPad.

  Kind regards

  DP - K