HP Pavilion dv6 Notebook PC: AMD graphics driver does not not after the upgrade Windows 7 to Windows 10 online

Similar Questions

• HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

  I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

  I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

  I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

  I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

  My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

  I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

  I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

  I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

  With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.

• Pavilion dv7 Notebook PC: AMD graphics driver

  I upgraded my OS from Windows 7 to Windows 10 laptop and now I get the following message:

  No AMD graphics driver is installed or the AMD driver does not work correctly. Please install the AMD driver appropriate for your AMD hardware.

  When I go on the AMD website and don't go through the instructions, I get a message that no compatible driver can be found.

  Can anyone offer advice?

  @cribguru

  This seems to be your only option.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy3&OS=Windows%2010%20-%2064

  The specifications of your laptop.

  http://support.HP.com/us-en/document/c02664905

  Your laptop has not been tested for W10 upgrade.

  http://WWW8.HP.com/us/en/ads/Windows10/not_tested.html?JumpID=cp_r163_us/en/pc_cons/win10/update/Findmyproduct

  REO

• Pavilion g6 2303sh 7650 Radeon graphics driver does not properly with Windows 7 (Code 43)

  Hi all

  I can't get my radeon card to work on a new installation of Windows 7. In the device manager it is a sign of warning on the name of the card. The camera has error code 43, but not other information on what might be wrong.

  I tried to reinstall the latest drivers AMD (not beta) at least a dozen times, but nothing works.

  Hello:

  Here is the link to the W7 x 64 driver which you are interested.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

  There is no W7 32 bit driver for the 7670M graphics card, then you must either install W7 x 64 or live with what you have now.

• ATI Graphics Driver does not work properly

  All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
  I have checked all the updates of Windows, said that I installed all available updates. Help, please!

  Hello

  First manually check the updated drivers with ATI and ask their support and Forums on all known
  questions. Use the methods to update the following drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ============================================================================

  Other troubleshooting methods would include the boot minimum and others who might help determine
  the cause and eliminate problems.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• Graphics driver does not not under Vista

  first disable my graphics driver does not work. & I don't know how to fix or install. What should I do? that you install? I am computer jargon challenged. so if you could speak in terms I can understand & explain to me if I do not receive it. I'd be happy. TY Heather

  * original title - need a lot of help please.*

  Hello

  Troubleshooting explains how to upgrade the video driver (graphics card) and others as needed.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Graphics card does not support the Aero themes

  I have a graphics card on CPU and its brand

  A10 - 7850K of AMD Radeon R7, 12 hearts of calculation 4 C + 8 G, 3700 Mhz, 2 Lossnay

  And this computer was built by me and I installed Windows 7 Home Premium 64 - Bit

  When I updated Windows Experience Index graphics Aero said 1.0 so I need the driver for this problem.

  It going no higher than 1.0

  Pls tell me if I can do something to solve this problem it is the old boring basic theme.

  Hi Lyle,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem your graphics card does not support the Aero themes. If you experience a problem then you need to update the drivers.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Try to update the drivers from the link provided below and see if it helps you to solve the problem.

  AMD DRIVERS

  You can also consult the article mentioned below to troubleshoot the Aero themes.

  Solve problems with Windows Aero

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  Hi phillipt84805120,

  Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

  Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF.

  My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF. That's the only reason I pay for access to Adobe Reader...

  Why used it allow me to do this? I have done several times before.

  Hi tinas,.

  Looks like you may be using an earlier version of the player, which now is no longer able to access the services Cloud of Document PDF. Please visit: Error Message: "Drive doesn't have the ability to access this service."

  You can download the most recent version, CD player, of https://get.adobe.com/reader.

  Best,

  Sara

• Error message: drive does not have the ability to access this service.

  Trying to convert pdf to Word Doc.  Error, said that drive does not have the ability to access this service.  I use this program all the time.

  Download and install Acrobat Reader DC.

• I bought a license of adobe product, which allows to transfer PowerPoint to word in March. But when I want to use it today, there's a wrong message "drive does not have the ability to access this service!

  I bought a license of adobe product, which allows to transfer PowerPoint to word in March. But when I want to use it today, there's a wrong message "drive does not have the ability to access this service!

  That looks like you are using an older version of reader; See https://forums.adobe.com/docs/DOC-5891