HP Pavilion DV6-QC808EA #ABZ Windows 7 64-bit

Similar Questions

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• HP pavilion dv6-1030us with windows vista 64 bit have now upgraded to windows7 32 bit.

  HP pavilion dv6-1030us originally with windows vista 64 bit have now upgraded to windows7 32 bit. MIC is unable to send sound in Skype after upgradation.

  Hello

  Try the following.

  First, uninstall Skype and when it is finished, restart the laptop.

  When windows has reloaded, download and reinstall the Chipset driver here.

  Once the installation is complete, restart the laptop.

  Let windows load completely, then download the installer of IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45044.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Reinstall Skype and see if the MIC now works Ok.

  Kind regards

  DP - K

• I'm looking for recovery for pavilion dv6-7115nr wiyh window 7 64 bit disk

  I want to restore to the original state of my PAvilion dv6-7115nr laptop, do not start the recovery hard disk partition. I lose the it. I install win 7 ultimate 64-bit.  Someone have an idea how find the recovery disk? Thank you

  Hello

  Please contact HP technical support directly: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  
    http://www.HP.com/cgi-bin/hpsupport/index.pl
      
  Kind regards.

• Pavilion dv6: cannot get Windows 10 to work for more than a few days before video fails

  I have a HP Pavilion dv6 with two graphics cards (Mobile Intel (r) Graphics and Raedon (TM) HD 6490 M). I installed the new Windows 10 twice and had a lot of success for about three or four days, then the display did not work. I was able both to restore Windows 7 but I want to take advantage of the free upgrade to Windows 10. Does anyone know of an incompatibility with my HP Pavilion dv6 and 10 Windows?

  It could be windows update tries to give you updates of adapter bad display every time. You have updated automatically whenever you install windows 10? If so, update the manual and ignore all updates that show the AMD, ATI and INTEL. I had the same problem but not with windows 10, I had it on windows 7 and 8.1 with the same computer, I didn't go to http://support.amd.com/en-us/download . Then select the automatically detect and install download and run it. If the screen turns off right after finished installing your drivers, then it must be the war video card causing problems.

  Maybe it's your video drivers are fighting eachother for domination, when the screen messes up, try to hook up an external monitor, if your computer has an additional port. Let us know.

• HP Pavilion dv6-3011so supports windowS 8?

  Hi I m asking if HP Pavilion dv6-3011so supports windowS 8?

  Hello:

  It could be, but I don't know about the graphics.

  I ran the 8 upgrade advisor windows and see what it reports.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

• SR 3015 HP Pavilion dv6 8.1 Windows x 64

  Good afternoon. Installed a new windows 8.1, pilots have become almost everything automatically, except one. I found the missing driver with help DriverPack Solution 14 R407. But this problem is not resolved, I don't work mode "sleep" after having closed the back cover, he did not return to the standby mode. Dear experts please help with utilities for HP Pavilion dv6 SR 3015 windows 8.1 x 64, where I can download the full program or game required for this model. The fact that on the official site, this model HP Pavilion dv6 SR 3015 supports only windows 7. Thanks in advance for your collaboration. HP - OUR CHOICE!

  I want to add that, after installing windows 8.1 x 64 does not work its LED button, it remains lit in red when turned on or off

• My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  Hi @Jake08,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and questions with external screen works not properly. You can try this without the connected external monitor.

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• Dv6-1308EL: Pavilion DV6-1308EL - upgrade Windows 10

  Hello all, as I wrote in the topic I like upgrade to Windows 10.

  I got the notification about the free upgrade, but I'm corcerned on drivers and compatibility in general.

  Some time ago I tried to install it and try it for 30 days Windows 8.1. I installed the drivers from windows update in regards to the trackpad driver that the operating system will freeze and restart continuously making it impossible to use.

  My laptop is a Pavilion DV6-1308EL with Windows 7 Home Premium (64-bit).

  I also tried to call the customer service, but the one thing they tell me, is to wait a while to see if will be released drivers.

  I hope that someone has tried to upgrade and can share his experience or if someone from HP can I update level or no advice and tell me if the drivers will never be released.

  Hi, Lorenza:

  It is a peer to peer forum.

  The volunteers here at HP person is allowed to respond to all positions on behalf of the company.

  I can assure you that HP will not release the drivers W10 for this series of models.

  I can make that statement because they do not have all the drivers to W8 or 8.1, so that they free to W10, logical.

  If you have tested W8.1 on your laptop and it did not work properly, it will be the same or worse with W10.

  You can uninstall the driver for the touchpad that installs windows 8.1 and use taking in charge of your laptop and driver page.

  Ignore the touchpad Windows 8.1 update by unchecking it and hide.

• HP Pavilion 10-f001au: I need driver for HP Pavilion 10 - f001au for Windows 7 64-bit

  Hey well im new here, I can't fo my Pavilion 10-f001au for windows 7 64-bit driver please? Because my Driver CD is gone and I need to reinstal windows because I had some delay here.

  Do you have internet in 10-f001au?

  Touchpad

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65643.exe

  Realtek LAN driver (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65647.exe

  Realtek card reader driver

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65644.exe

  AMD graphics driver high definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66817.exe

  Driver Audio Realtek High definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65645.exe

• driver Ethernet for HP pavilion 15-e006tu for windows 7 32 bit

  Please send the ethernet driver for HP pavilion 15-e006tu for windows 7 32 bit

  Thank you very much for the information. Download and install the Realtek LAN driver from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55979.exe

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Pavilion dv6: 10 for Windows upgrade fails Pavilion dv6 after update and entry of password

  After updating my Pavilion dv6 Windows 7 64 - bit of Windows 10 64 - bits, the connection to the computer to update resulted in a machine stuck with white (gray) screen. The upgrade seems complete without any problems. It is only after a reboot with the machine being upgraded and after entering the password that the lock status was encountered.

  You can see if any of the suggestions in the linked thread works - but DV6 succeed well in Win10, and if none of these work, you need to consider restoring to Win7: HP Notebook PC - computer starts but the screen remains empty (10, 8 Windows) | HP® customer support

  I have a DV6 and after many hardships, restored to Win7 because I felt that an older OS where everything worked was much higher than a more recent OS where many things were "broken."

  And there is no driver HP Win10 for the DV6.

• Pavilion dv6-1125el: upgrade Windows Vista to Windows 7

  I have a laptop (pavilion dv6-1125el) with a license of Windows Vista OEM. Can I upgrade my pc to Windows 7 using the same license?
  
  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  I'm afraid, NO, you cannot upgrade to Win 7 using the license of Vista.

  Why do you want to upgrade to Windows 7, all the problems with Vista?

• HP Pavilion dv6-6b56er and Windows 7 x 64 Professional

  Hello.

  I bought Pavilion dv6-6b56er with pre installed Win7 x 64 Basic, which is not convenient for me, because of its lack of features. So I made a full backup of the hard disks in the Pavilion and removed all software it. Then I installed Win 7 x 64 Pro and facing difficulties regarding the drivers of USB 3.0. Everything else works fine. I know that HP is not responsible for all of the experiences with the software that is not pre-installed, but I have a few questions.

  First of all, should what driver I install to ports USB 3.0 flag? To the download page, I found three different options:

  1 Renesas.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99763-1&cc=us&DLC=en&LC=en&...

  2 NEC.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en...

  3 fresco.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102204-1&cc=us&DLC=en&LC=en...

  and

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100237-1&cc=us&DLC=en&LC=en...

  The first two were installed (I mean they CAN be installed), the third - not at all settled. So what is the reason to put it on the download page?

  We're crazy. When you try to install the package with driver NEC, installation master tells you, that it is pilot of Renesas. There therefore no NEC drivers on the download page at all. Why I paid so much attention to it? I installed Everest, so I know what driver is needed. He tells me that I "NEC uPD720200 USB 3.0 Host Controller". Thus, there is no driver available on the download page for NEC chipset and we have NEC chipset inside.

  During this time, Windows Support Center offered some NEC USB 3.0 driver (http://ftp.hp.com/pub/softpaq/sp47501-48000/sp47677.exe ).

  So, who's right?

  The second question. If attempts to connect to the USB 3.0 a compound device (e.g. usb hub), then in "devices and printers" appear strange devices with the label "no data". If Renesas driver has been installed then ' USB 2.0 hub "appeared, and so Windows proposed NEC - then «NEC Electronics USB Hub» The County of strange devices depend on the number of devices connected to this unit composed. It's my main problem - these strange devices.

  So I came to a dead end. Any ideas to fix this?

  Any response will be appreciated.

  PS. Sorry for my bad English.

  The Recovery Manager is indeed on the hard drive. The version that is on the dvd discs doesn't have as many options as the original get the version of the partition.

  If you use recovery factory reset it will install all the original drivers and also recreate the recovery partitions. After finishing of the recover and have restarted the PC, you should be able to use the F11 key to access the hard disk again.

  You will need to reinstall the UEFI utility using the download from the section web software support and drivers under utility-tools. Given the usefulness of UEFI hard disk is a good thing.