HP Pavilion dv7-7110 m Ent. : How can I change my laptop graphics card? is this possible?

How can I change my graphics card. is this possible? I am waiting for your answer?

Advertisement

Hello

Unfortunately, your Nvidia gpu is integrated with the system board and is not an evolutionary element.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • A50-109: can I change my laptop graphics card?

    Hello
    Can I change my graphic card(A50-109) of the laptop?

    Please help me

    Hello

    I don't think that it is possible to change the graphics card in your laptop because it is specifically designed for your model rather than a generic type that is used in a desktop PC.

    However, it should be possible to change the assignment of the RAM up to a maximum of 64 Mb. check in the view "Advanced" available from the control panel settings, or you can also check in your BIOS to a UMA value (16 MB, 32 MB and 64 MB should be supported).

    HTH

  • How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

    How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

    Vista running on a Toshiba Satellite L500

    Hello

    Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

    If this does not work: right-click on empty office rotation - graphics options.

  • [p7-1240] How can I find out what graphics cards will work with my motherboard?

    I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggle and scouring the internet for answers, I discovered that it is not compatible with the BIOS on my motherboard, and HP does not update the BIOS. I returned the card and is now seeking a new, but I'm not sure what card works now, since my computer meet the requirements of system for the graphics card and it stil ldid does not work. Because the GPU manufacturers do not list the specifications of the BIOS under system requirements, how can I know if a graphics card will work with my system?

    My computer is a p7-1240 with a 520W PSU upgrade and approximeately 11 "of space to install the card.

    Thexn, welcome to the forum.

    The problem is a lot of video cards latest require the computer to have a complete UEFI BIOS.  HP began using one in mid-October 2012.  Before that date, the BIOS is the legacy.  This is why the video card does not work with your computer.

    I don't know what you would spend on a card, but MSI is a GTX 750ti which is a VBIOS hybrid.  It has a switch to change to inheritance or UEFI.  Is there a video link directly below the image of a card.  Paul of Newegg gives a complete description of the map.

    I like the best EVGA cards.  Their Support gave me a lot of information on their cards.  However, you will need to return to a GT 640 map to find one of their cards that does not require the UEFI BIOS.  They have a few updates for their BIOS' are which solves the problem, but we must call them for accurate maps.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

    I have a FSFY27J that I under stand is a Dell optiflex 270.

    How can I disable the integrated graphics card Intel so I can adapt the best graphics card

    Thank you

    Walter

    Hi Walter-W,

    If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

  • HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

    So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

    Hello

    After the PC starts to open the window RUN and enter: MSINFO32

    If the BIOS on your PC version is version 8, and then review the information below.

    HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

    A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

    Thanks for posting on the forum.

  • After starting either sleepmode or hibernation, if I don't do anything it stops. How can I change the length of time before this?

    Basically, it's one of those things "If you have accidentally activated the computer." It is only the biggest annoyance of since I was "keep" my computer after putting out of fashion 'sleep'. I usually have a certain pages open in firefox, and it does not record the sessions (together than on purpose, adult with children here who will use it from time to time if don't want them go on Web sites for the adult audience. No, I don't speak of stage I have other security measures at the UM, front.

    If I was here a few minutes agom, and I made the model of sleep. I put on a shirt and then see that the computer went to the screen "logout".

    I expect the laser mouse usb 'start-up' (because it's not automatically, it is linked to a USB hub) and I have, like, two seconds to move it.

    I need to change the time it will stay after start/waking up without interruption to the user before it stop, or turn off the feature altogether, and I do not know is not a 'problem', i.e., it was set in vista by microsoft, no viruses/errors/whatever.

    Hello

    Well, that has a lot of adjectives but not described is not the problem as well so here's my best guess.

    1 I want to erase the General corruption and repair/replace damaged/missing system files:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------

    Control Panel - Power Options - on left - require a password on Wakeup - do not require the value
    a password (except if you wish to do this).

    Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
    similar are not enabled.

    Shoot sleep problems - hibernation
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    All the default power plans and then set them as you wish. (Change Plan settings - Restore Defaults
    for this Plan - SAVE - then go back and set their and advanced settings as you wish.)

    I hope that answers your question.
    Rob - bicycle - Mark Twain said it is good.

  • How can I find out which graphics card I have?

    I bought a HP ENVY h8 - 1440t a little over a year.  Now I want another similar computer from HP, but I can't find what graphics card I have.  Cannot find the documents.  Checked on the HP site for specifications, but I find everything BUT that.

    I have to assume that these two would be the best maps on the 4...

    2 GB Nvidia GeForce GTX 645

    2 GB AMD Radeon R9 270

  • How can I restore my nvidia graphics card settings?

    HP G6000 laptop / Windows Vista 32 bit

    Hello.

    I think I did a stupid thing and set my chart on two monitors in Control Panel. Now when I log on the screen on my laptop turns off just after looking up (sometimes the office shows just just before deletion) so I can't change this back. I am able to run the laptop using graphics native but want to re view - put the nvidia card. I think I'd be able to see the desktop etc, if I had a second monitor but I have no one that has the right cable. Is there an easy way around that without using a second monitor?

    Solved this problem by a stroke of luck.

    I have reactivated the nvidia graphics (actually a restoration of hardware drivers Recovery Manager) and when re-load windows I got the usual black screen. However I noticed the key F4 was a symbol of the screen and when it has been activated (fn + f4 key) the display is back - I was then able to enter the Panel Nvidia and re - configure monitors for laptop only.

    It's "RTFM" - the HP user guides call the f4 shortcut key "switch screen".

    Quite obvious! The solution was there all the time, just waiting to be read!

    Now all I have to do is try to get the sound working... but that's another topic of discussion, I think.

  • How can I change paypal for credit card payment?

    I would like to change my paypal for credit card payment method.

    We can I change it?

    Hello

    You will not be able to change the payment method paypal to credit card ot vice versa.

    You can cancel your subscription and purchase a new subscription using the method of payment of your choice.

    Cancellation: -.

    Please contact support by calling/chat for cancellation requests and billing queries:

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    You can also check the help below document:

    https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

    Please go through the Adobe - General conditions of subscription as well.

    Plans:-https://creative.adobe.com/plans

  • How can I put my 1100 (graphics) card dell inspiron

    I can't seem to find any info on what graphics card already exists, so I don't know what kind of search. Do you know what graphics card, I would need, and do you recommend all cards (I could do with 256 MB)


  • can I update my laptop graphics card

    Hi I was just wondering if it is possible for me to update my laptop computer graphics card, like the one I have is an integrated intel hd and it's simply not enough good for games, I want to play

    The laptop I have is hp Pavilion g6 and the model number is LS294EA #ABU with an i3m70 core of intel clocked at 2.4 GHz because I don't want to buy a completely new laptop, but if it comes to that I might have to

    Hello

    Basically, you can, with a cost, and I think that this cost can be more expensive than buying a new computer because you have to take into account:

    • New price of the card, and WHERE you can buy it because the laptop cards are not the same office maps. You can't buy any normal store,
    • Need new card system (can be),
    • Need new system of cooling because in general more powerful card pumps out more heat (you want more powerful card don't you?).
    • May need new power supply because your current diet is not suitbale for the card. (I ordered a machine with the Nvidia card and I need to order a 90W charger at the same time, not the normal charger 65W. They rejected just my order.)
    • Cost of the work.
    • Packages a lot, a lot of aspirin.

    I hope this helps.

  • My computer goes to sleep/hibernate in 3 min. when not used, how can I change the interval of time until this mode?

    How to set the time it takes for my computer access mode standby, when I do not use it? Thank you.

    Hi ILUVHAWAII,

    Welcome to Microsoft Answers Forums.

    By default, your computer goes to sleep after a short period of inactivity to save power. To keep the computer awake longer, increase the sleep after setting.

    To keep your computer awake longer

    1. open power Options by clicking the Start button, click Control Panel, clicking System and Maintenance, and then clicking power Options .
    2. in the left pane, click change when the computer sleeps.
    3. in the change for the plan of the parameters in the page computer standby list, click the amount of time slot on battery or AC (or both) and then click Save changes.

    Turn off a computer: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

    Solve power problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I change my laptop PC screen to 1.SDM - X 93

    My online window does not fill the entire screen 15 inches from my PC.  There is a margin at the top where I can see my desktop. There are a few windows where I don't see top and bottom at the same time.  I tried to change the resolution without success. In the window "change the look of your view", the readings display , 'Laptop' instead of the LCD screen, '1. SDM - X 93 ", which is what I think I need to get a resolution of 1280 x 1024. I want to use the setting recommended, but for my computer, not a mobile device.

    Hey AlethaPatricelli,

    Take a look at the answer provided in the nets below the link to see if these measures in this case as well.
    Cannot save the settings display and multiple monitors

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Also try to use this Microsoft Fix It to see if it can automatically identify or solve the problems:
    Hardware devices do not work or are not detected in Windows

    Hope that helps.

  • How can I fix my laptop when I get this message...

    System Restore could not extract the file (C:\windows\$NtUninstalKB42823$\1421276145) the restore point. The restore point was damaged or has been removed during the restoration

    Hello

    I understand that you get an error message "C:\windows\$NtUninstalKB42823$\1421276145".

    When you try to restart your computer.

    I think that you have tried to run the system restore and everything by performing the above mentioned file system restore is not extracted from the restore point.

    Therefore, in order to solve this problem, we can proceed with the following steps mentioned below:

    1. click on start

    2. click on run

    3. Type "cmd".

    4. right click on the command propmpt and click "Run as Administrator"

    5. click Yes on the pop-up window

    6 BACK windows open

    7 type "sfc/scannow" and press enter

    Note: There is a space between sfc and / scannow

    System File Checker now verifies the integrity of all protected files of the operating system on your computer.

    8. once it is done restart your computer

    9. check if the problem persists.

    10. If the problem persists, follow the steps 1 to 6

    11. then type sfc/scannow repair

    12. it will fix the problem.

    Please perform the above steps hope it will solve the problem. I recommend you to perform above steps in safe mode with network.

    In order to enter the mode safe mode with networking:

    1 restart the system

    2. hold type F8

    3. you will get the advanced boot option

    4. use the arrow key on the keyboard and select "safe mode with network" and press enter

    Regarding

Maybe you are looking for

  • HP Officejet 6500 Wireless all-in - One Printer - E709n - locked up

    I searched the Forum but could not find a solution to my problem. My printer is locked and does not go in mode 'sleep'.  The power button does not work and is still on.  I'm unable to print, but however I am able to receive faxes.  The only way I can

  • My scanner does not work can you strt?

    HP psc 1200 series scan only pick up my video does not not because the document can help you?

  • CD-Rom drive does not work

    My gateway computer is 6 years old.  It came with a CD - DVD drive, HL-DT-ST DVDRAM gma - 4020B.  It has worked perfectly until today.  In Device Manager it has a yelllow exclamation point.  I tried to update the driver and I get the message Windows

  • Lack of the "Change desktop icons" option in my control panel

    Im trying to restore the icons of 'Trash' and 'My computer' original on my desk. Ive played a lot with these before settings on other computers, all of which is running Windows XP or earlier. I can't find the appropriate options in the Control Panel

  • WRT120

    I need to reset my wireless adapter frequently Realtek RTL8188CE wireless Lan 802.11n PCI-E NIC after being out of sleep.  I use the router WRT-120.  Why is this?