HP pavilion dv7: need help pavilion dv7 60490626

Similar Questions

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

  I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?
  
  Thank you

  Hello

  You are welcome

  If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

  Kind regards

  DP - K

• Need help with upgrade of processor - HP Pavilion DV6729ca options

  Hi, I need help to find compatible processors (CPU) upgrade for my HP Pavilion DV6729ca laptop.

  I flashed the Bios Version: l58 (the latest version)

  I know that this laptop already added support for the Intel Core 2 Duo Mobile Processors T8100, T8300, T9300 and T9500 in the version of the Bios F.45.

  I would like to know if there are all the most advanced processors that are compatible as any Intel Quad Core or Intel Core Extreme processor, thank you.

  More information: Mobile Intel 965 Express Chipset Family.

  T7700 or T7800 T9500 is the best, is best bang for buck in used cpu market.

  mixture of the above with SSD (for example, V300) & second storage conducted if needed in a caddy optical bay more max ram for your OS version would create a fast machine.

• Need help finding drivers for W7 for HP Pavilion a6220n

  I plan to upgrade my HP Pavilion a6220n Vista 32 bit to Windows 7 Home Premium 64 bit.

  I need help to find the drivers for W7. When I go to HP driver download page and select the OS W7 since the menu drop-down it does list all the drivers, could someone provide me a link where I can find all the drivers W7 please?

  I heard that we can use Vista to W7 drivers, is it possible?

  Any help would be greatly appreciated.

  Hello:

  Yes, you can use the drivers Vista for your PC, and it should work fine.

  After have connected you to the internet, windows update will download all drivers windows 7 that may be more current than the vista ones.

  DO NOT under any circumstances to Flash BIOS after installing Windows 7, or you may damage your PC most likely permanently (as in kill him).

  If you find that you need to update the BIOS, do so now with Vista installed.

  Paul

• NEED HELP WITH MY HP PAVILION G6

  Hi, I installed an update on my HP Pavilion g6 one moment he keeps saying "FAILED TO CONFIGURE WINDOWS updates updates RESTORE DO NOT turn OFF YOUR COMPUTER" then it restarts and says "INSALLING updated" then he says: "CONFIGURING UPDATES" a return to the first message and continues to turn in circles It has been like this for more than 3 hours, please help someone

  Hello @lisavstar ,

  Welcome to the HP Forums!

  I understand that the computer is stuck in a loop of update. I will do my best to help, but first, I need the following information:

  1. number of the exact model of the computer. If you need help to find this information, please see this site: Product Guide to find your mobile phone number

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. can you computer go into the BIOS?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  5 can you launch the computer in Mode safe?

  In addition, if you can, I would make a system restore. I want that bring you the computer to the earliest possible restore point, in an attempt to Dodge everything that has the problem. Here is a document on how to perform a system restore: System Restore

  Mario

• need help... I cannot find ati mobility radeon hd 6470 software for my hp pavilion 1115tx g4

  need help... I cannot find ati mobility radeon hd 6470 software for my hp pavilion 1115tx g4

  Hi Pinpogi,

  The drivers arehere. Select the driver AMD and read the information to ensure that it is for the good installed onboard graphics also.

  Best regards

  ERICO

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

  Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

  HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

  Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

  Phoenix BIOS, hard drive test result: "Fail #1-08".

  I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

  However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

  How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
  Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

  I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
  I contacted HP to order recovery disks, but they are no longer available for my computer.

  Any suggestions would be greatly appreciated!
  Jon

  Update...

  I found a site that offers the following:

  http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

  Recovery Kit 435422-001 for HP model dv6108nr number

  

• need help, my HP Pavilion G6 1350SD gice disabled system

  need help, my HP Pavilion G6 1350SD got locked, it says code system off: 60002639, can anyone help?

  Welcome to Zephyr. Try.

  75960219

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro

  Dear helpdesk,

  URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro...

  Send me the link for the driver or compatible.

  or email to: [email removed for privacy]

  Kind regards

  MRZ

  Message edited by SandyD on 25/11/2009 14:01

  Thank you

  but I can't download link for LAN

  FTP://ftp.HP.com/pub/softlib/software10/COL30407/PV-75371-1/sp44423.exe is not available.

  and I need driver motherboard chipset

  Help me.

  MRZ

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Pavilion dm1: I need help

  I need help I don't know administration pAsseord or power on password what can I do

  Hello

  The password screen, press enter 3 times and you will receive a 'code to stop' - post returns with this code.

  Kind regards

  DP - K

• HP Pavilion Slimline s5 - 1140d: need help with relocation to Windows 7 from Windows 10 Technical Preview

  Hello. I am currently using a Windows 10 Technical Preview in my office and want to install the official version of Windows 10. However, Microsoft has answered me, in order to install the FREE Windows Home 10 fresh new official retail version, I have to go back to the previous version which is Windows 7 then updated via windows update. I tried to check with HP Recovery Manager, but there is no option to return to windows 7. Only it has option to reset the tech 10 preview windows. So I went to the Microsoft website to download the ISO of Windows 7 files to install in flash player, it asks for the product key. And then I entered the key correctly which is stuck on my Windows product key sticker desktop. But he didn't and the message that this is a key of the OS preinstalled, contact your manufacturer. Now, I'm stuck with how to return to Windows 7! I need help ASAP! Thank you. I did backup and everything so much already.

  Yes, M$ makes it seem as if the OEM product key will work, but it does not work. There are choices and it depends on how you wish to just to proceed.

  As the model number is not included in the post, it is only a general Council, here.  You can make one of these to restore Windows 7 to useful step.

  (1) reinstall Windows from the recovery disks set - if you do not, order of HP for a low price ~ $ 25 - $30 US

  (2) check if the recovery Partition (usually D :) there is and run recovery from that)

  3) reinstall using Winows 7 retail disc and allows to activate the COA key

  (4) buy 10 Windows and install

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!