Dispatchers tips double

Similar Questions

• Satellite A50-110 requires passoword

  Hello.

  I have a Toshiba Satellite SA 50-110.

  Two days ago, it was closed, and when I put the computer show me = "password:".

  Can you tell me what is the password?

  Looks like you're new to this community.
  So here's a useful tip: double and assignments are not allowed.

  Back to your question of password: I think you mean BIOS password.
  It seems strange to me that laptop request a password that has not been defined in the past.
  However, the fact is this unknown BIOS password can be removed or deleted by the Toshiba authorized service provider only.
  If you need to contact these people to get this deleted password.

• CS6 and Wacom IntuosPro: during the brush lines of random fat, full time entries appear.

  Whenever I draw me with the brush on my Tablet IntuosPro tool I would create randomly heavy lines or lines where the starting point of the next line connects with the final point of the last line, or where lines would be at full power.

  This occurred during high speed stroking or when I have a little drawing, zooming and the pen tip remained in the half of a square centimeter.

  Here's what he had really look with bold lines:

  

  
  

  I tried everything I found in this thread

  Re: Randomly lose the pressure sensitivity in photoshop?

  and this one

  Re: Wacom pen pressure a problem, a possible solution.

  Nothing has worked. After a few more play that I have disabled the right-click Pen in Photoshop in the Wacom tablet settings.

  It now looks like this:

  

  The settings that I changed are: Application: PS Photoshop. (Until he comes to all others)

  And then I put the cursor under "Tip Double Click Distance" to off.

  Now, even when I zoom I can sketch quickly and with close features of without generating any line thick or oily.

  Now, it looks like this.

  

  This is visually underlined settings.

  

  (I wanted to edit my post above, but somehow I couldn't or didn't see "Edit" button).

• Double video cards

  I have the video card from AMD Radeon 7950 / 3GB with 3 monitors has 30' and two of 24.  Would I be able to add an another 7950 to help speed up the video rendering?  And not to add another monitor.  Or should I replace the video card for two cards video that would be equal to 3 GB?

  Yes, you can add another video card, however, I think that the 7950 requires two power connections to THE and the MP has only two connections. You probably need to add another power supply

  NG-a-second-GPU-w-w-o-soldering.1460429/ http://forums.macrumors.com/threads/How-to-Rig-a-2nd-PSU-for-Modern-GPUs-or-addi

  Also if you install two cards double width, you will have only one slot of card available.

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  http://www.macvidcards.com/index.html

• Mini display to HDMI adapter double link

  Can I use a mini display HDMI Dual link adapter to connect 3 HDMI TV to a Mac Pro?

  I never heard of a "Mini display Dual HDMI link.

  There are double-ling mini displayport > DVI adopters as the double bond is required for DVI so a resolution higher than 1920 x 1200.

  You can get the dispatchers who will share a single HDMI into two identical signals. You may be able to get one which divides into three signals. A power supply may be necessary for a this type separator

  A dispatcher will give identical screens on each monitor.

  What model Mac Pro?

  What card graph (s) installed?

  Want a different output on each monitor?

• switch apps tip won't go away

  Just got my new HP Jet 7 Tablet and when I boot, a suspicion-tip appears on the left side of the screen with a big arrow. He told me that I can go back to the last application by sliding to the right side of my screen.

  This tip is blocking the screen below and I can't make it go away!

  When I drag from the right, 5 icons show: find, share, start, devices, settings. If I click on start I get these blocks on the destop: mail, OneNote, calendar, etc. But this suspicion is still there.

  What should do? Is it possible to disable all of THE cues of projection?

  My apologies!

  Apparently, I failed to take into consideration that you would not be using the version of Windows 8 Pro and have therefore not access Local Group Policy Editor.

  We can turn off the tips through the registry instead:

  • Type a Long right click on the desktop and select the new text file.
  • It will have the name put on evidence and you prompt to name the file.
  • Name the file Disable_Help_Tips.reg (note the extension is .reg, not .txt).
  • Make a click right to long tap on the file and select Edit. This should open a blank Notepad window.
  • Copy and paste everything between this point and the following in Notepad exactly as it is:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\EdgeUI]
  "DisableHelpSticker" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\EdgeUI]
  "DisableHelpSticker" = DWORD: 00000001

  • Click on file > save in Notepad.
  • Close Notepad.
  • Double-click the new file and it should invite you to confirm.
  • Once confirmed you will get a message that it has been merged, delete the file and restart your tablet.

  Let me know if it works.

• Remove balloon tips xp sp3 - normal method does not work

  Windows xp sp3 - I want to stop ToolTips. I changed the registry, as explained in microsoft Advisory #307729.  I also used the automatic fix of Mr. Fixit from microsoft in the same notice.  In both cases, the registry switch is past from 1 to 0.  After the reboot, the switch changes to 1 and the balloons are there.  Apparently, something overrides change.  Any ideas?

  Not sure what is put back. For good measure, download disableall.reg (which is #11 in the left column, point = Disable All) on this page:

  http://www.kellys-Korner-XP.com/xp_tweaks.htm
  Double-clicking will make the following changes to your registry automatically:
  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced\\\]

  "EnableBalloonTips" = DWORD: 00000000

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced\\\]

  "FolderContentsInfoTip" = DWORD: 00000000

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\tips]

  "Show" = DWORD: 00000000

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced\\\]

  "StartButtonBalloonTip" = DWORD: 00000000

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced\\\]

  "ShowInfoTip" = DWORD: 00000000

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]

  "NoSMBalloonTip" = DWORD: 00000000
  Note that there are five additional registry changes, compared to what you see here:
  http://support.Microsoft.com/kb/307729

• Wireless mouse left button does not open programs when double-clicked.

  I have a new Office Tips multimedia - microsoft wireless keyboard and mouse.  Sometimes the icons on the desktop when you click the left button double does not open the program.  And there are times when the program is opened, you can use the left button to navaigate within the program.  Why is this happening?  For the desktop icons, it happens more often in Internet Explorer... Help me please!

  Hi amwash55,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Check and make sure that the mouse settings are correctly set.

  Set the double-click of the mouse speed

  http://www.Microsoft.com/enable/training/WindowsXP/doubleclickspeed.aspx

  If the mouse settings are correct, then make sure that you have installed the latest version of the drivers for the device.

  http://www.Microsoft.com/hardware/downloads/default.mspx

• 7410 double sided printing

  Well here I am again with printing problems.

  I have a Mac Book Pro using OS 10.9.5, Mavericks. I managed to solve my problem of printing and scanning with the help of Shlomil. In addition, it helped me some time ago with a problem printing double-sided. Now I find I have the same problem with printing face double but am unable to follow his advice (which fixed the problem the last time)...

  Now, the print face area two does not appear on the menu drop down print! So, I went to the following (using the latest tips provided Shlomil)...

  "1. Verify duplex printing accessory has been installed correctly." To check this open system preferences and go to the Printers & Scanners. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure that the box next to HP printing accessory (duplexer) sides. »

  However, when I select "Open Print Queue" there is no 'Printer Setup' in the tab menu. So I can not check the "accessory of HP print two-sided (duplexer) is checked" (unless I'm doing something wrong). I and #2.

  2. on the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click on show details to see all available parameters.

  3. in the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  I skipped the step above, given that the print face area two does not appear on the print drop-down Menu (and no window available extended printing).

  I went #4.

  4. to select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as binding edge Long (Portrait) or binding Long Edge (landscape).

  Now, I do not show a "binding" type in the page layout"selection on the menu drop down, etc.

  Shlomil suggested if it doesn't reset the printing system. I'm really scared to do because I have 3 printers and a scanner in different places. When I chose the lower reset printing system to the low said he would remove all... all printers, scanners, fax machines, etc.

  Is there a less severe alternative? I'm puzzled! This all worked before (two-sided printing, printing/scanning). The only thing I can think is at this moment I have correct permissions to update or a newer operating system.

  Help, please!

  Well... I can't believe!  Please ignore my ramblings.

  I have mucked in the things of the printer and 'Printers and Scanners' system preferences, selected "Options & supplies" rather than "Open Print Queue" and then choose "Options". The accessory "HP" box of double-sided (Duplex) printing lies. It has not been verified. Although I don't know how he got uncontrolled, I checked that and it fixed my problems.

  Thanks again

• Help! Double vision on the screen...

  Double vision on the screen which is so bad I can hardly read what is ISO screen. I had this problem since March. I had to disabled my GeForce 9800 GT since the update of the driver is not good.  I uninstalled Aero. The screen is normal for 5-10 minutes, then goes into ugly mode.  Sometimes, the computer starts in double vision.
  Thank you... John

  It may not be the video card, it can be the screen itself.  It may even be a problem with the hardware.  You have another monitor, you can interact with to see if the problem moves - while we will have a good idea if it's the computer or the monitor.  The same goes for the Videocard if possible.

  You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should do at least the monitor and video card at least all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If the above does not help, I think it is a material and not a software problem.  I would take the system to a repair facility of the competent computeer for diagnostic, repair or replacement.  You can also consider sending for service to the manufacturer.  Compare the cost, schedule, guarantees, parts availability and cost and these things before deciding.  The decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Touchpad not working not - corner double tap does not work - no yellow light

  I have a Folio 9470 m.

  My touchpad does not work.

  The tip of the double tap does not work.

  The yellow light is not on.

  Someone at - it help him?

  Press the power button and then immediately press the ESC key to call the start menu.

  In the boot menu, press the F2 key to enter the PC Diagnostics.

  Select the component tests , then the mouse. Run the test. If she passes the test then the touchpad is fine and all that should be required is reinstall the driver for the touchpad. You can download the software from your support of the ultrabook Portal in the download section. Download and install the appropriate version of the operating system.

  If the led on the touchpad of orange does not illuminate, the touchpad is enabled. Amber led on the means, the touchpad is disabled, disabled.

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Connect fans double static pressure to the R4 Aurora system fan connector.

  I recently replaced the stock liquid CPU cooler in my R4 Aurora with a Corsair H80i. The Corsair pump works fine and I have seen some dramatic reductions in the time, but the Corsair double fans (which connect in the pump via a cord block in y splitter) are boring fort on more charges, a common complaint with the H80i system.

  A simple solution is to replace the fans stocks with static pressure of Noctua NF-12 PWM fans who have a DB(a) of 22.4 only Corsair vs Corsair. Rating 37.68 dB (a).

  Every Noctua fan comes with a cable 4 pin Y you can connect two NF-12 to a single fan 4pin connector, so I was contemplating doing this.

  If I connect the Noctua fans with a cable to Y for the the fan connector from the system of the Aurora, is - it safe to do and I have gain control of Noctuas twin in the Alienware command center?

  One fan Noctua NF-12 draws a max of 0.5 a. amps of Twin connected with a single splitter cable of Y I guess would then draw a maximum of 1 ampere of connection of the system fan. Then the connection of the fan system handle this current absorbed safely, in its design specifications?

  Aurora R4 - chassis Standard

  PSU: 875

  BIOS: A11

  Graphics card: GTX 760

  Windows 7 x 64

  I don't know what will happen if you use the connector overhead lighting to your fans power source, but your best bet is to look at the technical label on your old stock cooler fan; What was the stock fan is rated at is probably most amps you should be inspired through the connector overhead lighting. Alienware settled on this fan of stock for a reason; If they could have installed an amp fan higher than they would have, since Dell/Alienware always seems to use a high-power fan while another oem would have used a type of whimpier to save on production costs. Alienware has already used the nominal fans higher in & for our systems. If there is such a thing as a cooler option stock of high performance, you would browse the sources online (eBay or google) to find that spec amp of this fan is, & assume your 'wiring system' could manage the spec of improved so fan if a fan of upgrade are of course. Pass, if CmnCntr does not detect your cooler pump is running (through 7 pump connector cpu pins), chances are it is not, try to control RPM fan. You will need to test this, maybe get lucky. Short of some retro - equip delicate stock cooler 7pin to the new h80 3pin (tips: http://en.community.dell.com/owners-club/alienware/f/3746/t/19454479.aspx), for now, to plug a fan into his Council overhead lighting, see if the spin of its RPM faster under a load when times cpu rise... it could talk to you about something that CmndCntr means when he feels nothing on the 7 pin... good luck

• Unity and double network interface cards

  The unit works well with 2 network cards? Tips or tricks if you use 2 network cards? They are one of the subnets differnet 2. My voicemail ports are registered in CallManager, but on a different subnet from the CallManager is on. And this isn't the MAC for the NETWORK card that my license file is for.

  Two NETWORK adapters is supported only in a configuration Active / Passive with the unit. Both NICs must share the same IP address. 2 cards using NETWORK in an active scenario can cause audio one-way and MWI problems. Please see the links below for confirmation.

  Configuration and troubleshooting of network interface cards double for Cisco Unity

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_tech_note09186a00801d1c56.shtml

  Troubleshooting Cisco Unity

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_troubleshooting_guide_chapter09186a008015082b.html

  I hope this helps. If so, please indicate the position.

  Brandon

• Why don't my folders or libraries opens when I double click on them?

  When I double click on folders or libraries, I get an error message saying "this file does not have a program associated with it for performing this action.  How can I fix?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.