HP pavilion elite e9220y downgrade to windows xp

Similar Questions

• Office Pavilion Elite e9220y: name of the Internet access when you hover over said tskbr network 5. is that HP name or co cable. ?

  Hello

  I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer.

  I'm wired; but have wireless for other things (Kindle, etc..)

  When I open internet access in the bar of tasks and under the "wireless network connection", I see MY connection (and the name I gave my connection) and 5 solid green bars (no problem).

  Above this section, there is an article with a picture of a House (provided by HP, I'm sure), and he says:

  ' Currently logged on:

  and just below it says: (to the right of the photo of the House) network 5

  and just below it says: internet access

  That's all it lists the wireless network connection with my name and the names of other connections in the district.

  My question:

  the name "network 5"?

  HP says it is my cable provider; my cable provider says it's at HP.

  This can be changed?

  Thank you!

  Hello Denise,.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you have a problem with wireless networks.

  Windows will think it's in a new network whenever it detects a new router. If you have changed your router or the router configuration. Windows creates a new network. But do not worry.

  If you don't want the name of the connection to be listed under active connection, follow the steps.

  (1) open the "Control Panel".

  (2) select and open "network and sharing Center."

  (3) click on the ' icon "(une icône de la maison pour moi) less 'show your active networks'.". " This will open the dialogue "set network properties." Here, you can rename a network connection or a change as the network connection icon.

  4) click on "Merge or delete network locations" to view the list of network connections that are stored. You can merge or remove connections

  Let me know if it helps.

  Have a great day!

• HP Pavilion Elite e9220y PC, black screen with blinking underscore.

  Hello. I have a HP Pavilion Elite e9220y with Windows 7. I have a black screen with a flashing underscore.

  I stood and went to the bathroom and came back to this (on fiance mobile atm). If I go, I can do ctrl + alt + delete and get everything except the system recovery... so I made a recovery CD.

  In the recovery CD, I get the options to
  Startup Repair
  System restore
  System Image recovery

  Windows Memory Diagnostic
  Command prompt.

  I have everything but my mouse, screen and keyboard connected. No CD in except for the recovery CD.

  Startup Repair found nothing, so I tried to restore the system... He said it restored to an earlier date, but I get the same screen and the same options... So I tried the following steps:

  Boot from the new rescue CD, select repair your computer and choose the command line. When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Above always leads to have the black screen with the underscore flashing with the same options available... I'm so lost...

  If possible, I'd like to back up my files I have. I have plans on my computer that I spent working long hours and lots of family photos. BUT if this is not possible (I have not access to a second round to save the files), then I'm more than willing to start again... I want to just that my computer back... I have not even had it for three years yet.

  So any help to get back on the rails would be greatly appreciated... Thank you in advance.

  
  

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• Pavilion 23-b239: downgrade to Windows 7

  Hi all, I bought my mother a 23-b239 Pavilion all in one office.
  She can not just get used to Windows 8.

  I would really know if it is possible to downgrade to Windows 7, and if someone could
  kindly tell me:

  • A profile of my hardware information
  • Where can I get the drivers I need.

  Thank you very much in advance!

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  This computer is a model of consumption with no Pro Windows 8 version, there is no right to demotion. First, you will need to purchase a valid copy of Windows 7 with a product key and COA. You also need to ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;

  

  or

  

  Also, as the hard disk can be partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  Please report to the Windows Device Manager "Hardware ID" for all devices missing or unknown, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pavilion 15-AB044SA: Downgrade from Windows 8.1 to windows 7 on HP Pavilion 15-AB044SA

  I just branch a refurbished HP 15-AB044SA comes with preinstalled Windows 8.1. I'm not a fan of the operating system and want to downgrade to windows 7. Could you please guide me to the decommissioning?

  And I have the same funcitionality in the laptop running Windows 7 as Windows 8.1? Is it possible to keep the same license OS currently on the laptop?

  Thanks in advance,

  Mario R

  Mario_SR

  If the reason why you don't like Win8x is the lack of a desktop and start menu, consider downloading and installing ClassicShell.  This will give the look-and-feel of Win7 back - and it's FREE!

  As for Win7, there are drivers HP to Win7 for your PC: http://support.hp.com/gb-en/drivers/selfservice/HP-Pavilion-15-Notebook-PC-series/7771366/model/8255011

  If this page does not display Win7 when you open it, then click on edit and select Windows 7 from the menu drop down.

  As for the feature, Yes, you will have the same functionality in Win7 you have in Win8x - just a different user interface.

  There is no 'path of decommissioning' to Win7. Instead, you'd have to do is to boot from Win7 installation media and install it on top of Win8.  This means that you will lose all existing applications, the parameters and the data of the user in the process.

  NO, we do not keep or use the same license.  Your PC came with HP OEM Win8 preinstalled, and that's what the license is for.  To install Win7, you will need to buy it and then activate it by using the product key that you receive with the purchase.  You can't buy this at HP, because he's not selling copies of Win7.

  But what you CAN do is to check with the HP customer service and see if they will sell you HP to Win7 for your PC recovery media.  It would cost much less go out and buy a copy of Win7 retail.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• I have a HP Pavilion Elite i7 Desktop w Windows 7 and I want to add a 3 TB hard. I can?

  I have an i7 HP Pavilion Elite Desktop w 2 year, Windows 7 and I want to add a 3 TB hard.  Can I add a 3 TB hard (probably known as the Segate Barracuda XT 3 TB HD) as a secondary disk without changes.  If this is not the case, what should I do?

  Short answer is not really. You need UEFI BIOS to do, and your system did not come with it. You could add it, but only 2.2 to be visible as a single drive. Using utilities... etc. of the manufacturer of the HARD drive, you could partition to see the rest, but as hard disks get bigger, the BIOS must change to adapt. They changed, but still yours is the older BIOS inherited, and there is no way to change it to a UEFI version.

  Sorry

  Bill

• HP Pavilion 15z-p000 Downgrade to Windows 7 - need drivers

  Downgraded OS Win 7 on a HP Pavilion 15z-p000 CTO Notebook PC and I have 2 drivers left that I can't find.

  Universal Serial Bus Controller (I download AMD cipset drivers which I think is supposed to have that, but still does not)

  PCI\VEN_1022 & DEV_7814 & SUBSYS_2268103C & REV_11
  PCI\VEN_1022 & DEV_7814 & SUBSYS_2268103C
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  PCI\VEN_1022 & DEV_7814 & CC_0C03

  PCI encryption/decryption controller

  PCI\VEN_1022 & DEV_1537 & SUBSYS_2268103C & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_2268103C
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Thank you!

  Hello:

  If you have installed this driver chipset restarted (a first on the list), and the USB3 controllers still don't work, and then download and install both the drivers that I posted the first link below.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133028_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  It is the only driver I could find for the encryption/decryption PCI controller...

  See if the W8.1 driver works...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

  If it installs automatically, great.

  If this isn't the case, close any windows error.

  Go to Device Manager and click the controller of encryption/decryption PCI needing drivers.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software method and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.

  Make sure that the include subfolders is selected and I hope that the driver will be installed.

  This driver contains the hardware ID for the device you are looking for.  I don't know if it will work with W7 or not...

  ;*****************************************
  ; INF Section manufacturer
  ;*****************************************
  [Manufacturer]
  ManufacturerName % = AMDMfg, NTamd64

  ;*****************************************
  ; Models INF section
  ;*****************************************
  [AMDMfg.NTamd64]
  % amdpsp. DeviceDesc % = amdpsp_Device, PCI\VEN_1022 & DEV_1537

• Pavilion 20-b010 downgrade from Windows 7 support-side USB

  I downgraded the Pavilion 20-b010 Windows 8 for Windows 7 64 bit pro and can not find the drivers for the USB 3.0 side ports.  It seems that these only have drivers for Windows 8.  Is it possible to get them to work, even in a level of USB 2.0 on Windows 7?  the ven = 1022 (AMD), dev = 7812 (FCH XHCI USB).  All other drivers seem to be installed and functional.   DriverScan couldn't help.  Any suggestion would be appreciated.  Thank you.

  Hello:

  Download the AMD chipset driver and restart.

  The first listed file contains the USB drivers for the chipset of your PC 3.0.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• HP Pavilion g153us 17: HP Pavilion 17-g153us Downgrade from Windows 7. WiFi card problems

  Customer brought this new unit with 10 Windows preinstalled and I wanted to downgrade and even if its always a worry, I managed to get them to always easy downgrade but the card wifi on it gives me a hard time.

  Card details

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  I tried a few downloads and that they be crazh with an error or compelete and nothing happens or installs but gives an error and the driver is never able to be used.

  Please give me some ideas on the right side of the road for this camera please.

  From what I've read, it's a Broadcom BCM43142? Is this correct?

  Thank you guys!

  Hello:

  See this post below... I think getting in the same back and forth with this member with exactly the same results.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/unable-to-find-a-Windows-7-x64-driver-for-Broadcom-BCM43142/m-p/5506377/highlight/true#M112566

  He scored the pilot that I posted the solution to see if it works... (sp70888).

• Pavilion Elite e9220y - I am unable to move the different a PCI slot wireless LAN card.

  I need to move up to the next PCI slot Atheron wireless LAN card so that I can install a new Radeon 6770 GPU. However, when I move the LAN card to other to slot machines, the PC will begin to start but then give a white screen with a green bar at the top. If I move the map LAN back to the location of the bottom, it starts very well and allows me to connect to Windows.

  Any ideas would be appreciated, I have tried as far as I know do.

  Thank you.

  Other specifications:

  Windows 7 64

  AMD Phenom II X 4 910

  8 GB RAM

  Motherboard - H-RS880-Μatx (Aloe)

  I agree, in the meantime I decided to switch to a USB adapter so that I can move forward toward the front. Thanks a lot for your help.

• Pavilion Elite m9500z raid driver windows 7

  I upgraded my Pavillion Elete m9500z to windows 7. Worked very well. Update of Windows has loaded a new driver for the video card. The pilot hangs the system, the blue screen. I tried to go back to the previous driver and the system still crashes. I tried a system restore point with no luck. Finally, I tried starting problems resolution and makes things worse. System boots to the point just before the login screen. Remains black with the cursor, even in safe mode.

  At this point, I amtrying to fix the installation with the windows installation disc. The problem is that the boot drive is a raid drive. The installation disc can not see the drive without the driver. HP drivers are exe only files not the driver files. Motherboard MSI website has no drivers because the jury is the property of HP.

  I need the drivers in a format that windows will recognize or a method of extracting files from the installer of HP.

  Yet once it shouldn't be this difficult.

  Help, please

  These drivers failed with the same error. Finally, I converted the RAID drives to AHIC and they have been recognized by windows. The problem with the system was caused by the video card. Windows was unable to complete the repair process and the system is in place again.

  Thanks for your help.

• HP Pavilion Elite e9220y

  Hi guys,.
  
  My computer does not start after Windows 8 logo screen and eventually begins to beep continuously. I put in a disc of Windows 7 to attempt to reinstall Windows, but the wizard does not even detect a hard drive. I wanted to exclude any other question, it could be to replace the hard drive.
  
  Thank you
  Zach

  Try running diagnostics equipment for your memory, hard drive and video:
  http://support.HP.com/us-en/document/c01895819

  In a time possible future if we do not find a hardware failure, do you have the recovery discs or have the system on your PC recovery partition?

• HP Pavilion Elite e9220y: HDMI connection problem

  I can't get my computer to connect to my monitor (HP w2338h) in hdmi mode.   The graphics card is the original of the computer (Radeon HD 4350) that I'm looking for upgrade to a Radeon HD 6670, but I had no input (black screen) when I went from cards.  I have given the old card and OSD have the HDMI input, but it will connect only in VGA mode.   My drivers are up to date.  I replaced the HDMI cables and neither one works.  I have reset the monitor to factory settings in the OSD.  I'm stuck with a new video card that I can't use.

  I also moved the card wifi to a new expansion slot to make room for the largest video card.  When I handed my old video card, I discovered that I lost my internet connection until I moved the wifi card to its original expansion slot.  It's a whole other issue...

  Should I just an old dog that doesn't hunt anymore?  Otherwise the thing is what I need to do business.  For the games... Well well... not so much!

  Thanks in advance.

  Dear customer,
  
  Welcome and thanks for posting your question on the Forum from HP Support.

  Please see this article by HP "setting your monitor upward."

  http://saw.CCE.HP.com/km/saw/view.do?docid=emr_na-c01643091 & HSID = 65324518 & sz = 19657

  The web link above, they showed the steps for the HDMI connection, which should help you isolate the problem.

  Hope this helps, for other queries in response to the post and feel free to join us again.
  
  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• What power supply to insert in a Pavilion Elite e9220y?

  I saw a note that says that ATX fits most of the towers, but I just want to be sure that ATX is the right that I need.

  Also, could you please recommend a good diet for an ATI Radeon HD 5770? I think I will need atleast 450W +.

  Thanks for any help!

  Andrea92FL wrote: I saw a note that says ATX fits most of the towers, but I just want to be sure that ATX is the right I need. Also, could you please recommend a good diet for an ATI Radeon HD 5770? I think I should at least 450W +. Thanks for any help!

  Hello Andrea92FL, I checked the specifications for the ATI video card and as you suggest, it requires at least a 450 Watt power supply.

  The power of your system is a version of 300 watts with a part number 5188-2625.

  The dimensions of this OEM power are 5.8 "W X 3.5" H X 5.5 "L

  Here a link to NewEgg is where a Corsair 500 watt PSU can be purchased.

  The dimensions for the Corsair are 5.9 "W X 3.4 ' H X 5.5' L

  In my view, that this Corsair PSU will fit your case which is a Micro-ATX and not the standard ATX.