HP Pavilion f2105 monitor: p8727aa

Similar Questions

• HP Pavilion w2216h monitor repeating problems...

  Hello, I own a HP Pavilion w2216h monitor. It is the second that I own. The first has almost the same problem as the one I have now... but since it's on the warranty sent me a new. Now, it is up just like the old. I think that there is a fault to underscore with this monitor, but I'm not sure.

  The problem with the monitors is almost the same thing.

  The first monitor would have distorted color and lines of this violet/red/brown go through it, I don't remember if it was in the vertical or horizontal. It does not matter because it was under warranty and I got this new monitor sent me. Same model.

  For the second monitor, the screen gets very white, then slowly goes black. The colours seem to fade and blend each other. If left to run its course, ends with the screen goes black with shades of white and other colors in random places.

  Here's the info...

  HP Pavilion w2216h Monitor

  Computer HP Desktop running Windows 7 64-bit edition

  Graphics card is a Nvidia Geforce 9800GT

  It is connected to the VGA DVI cable. Connecting the monitor to the video card.

  Here's what I did and checked so far...

  I checked the video card carefully, the drivers are installed and up-to-date. Works well with 2 other monitors different brand and size. There is no overheating of any kind and the DVI connector works very well. So the problem is not with the video card. I checked all the cables! Swapped, cables and tight, raging, then tightened again to make sure.

  Recap. The computer is good, the video card is good, the DVI connector is good, the VGA cable is good. This leaves the monitor to blame. Now here's the question is it broken? Or can I fix? Also I'm the only person having this problem? If this isn't the case, please answer, cause I have the impression that it is a recurring problem for many people who own this product. Thank you for your time.

  Hello Rockets1995,
  
  If the screen is white that usually tells me that it is a bad connection. If you are still under warranty then you can start there.
  
  If you are not in the warranty and you want to try an auto repair then you can go that route as well. If you open the monitor there is a small tablecloth that connects the screen to the Board of Directors, this cable is likely in the open air and is not firmly connected.

• just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?

  just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?

  Hello

  The following link shows its specifications:

  http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =

  No speaker. Please try the following Nice monitor:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/MDP/accessories-88342--1/HP-Pavilion-touch-monitors--1

  Kind regards.

• HP Pavilion 23xi: Desk Mount double HP Pavilion 23xi monitors

  Hello
  
  Is someone can you please tell me if it is possible to mount two monitors of 23xi hp pavilion on a double rack mount monitor office.
  
  Look at the back of the screen, it does not appear that there are screws for the monitors to climb.
  
  I just wanted to get this information before I go ahead and buy a monitor to double desk stand.
  
  Any information on this would be greatly appreciated.

  Hello

  There can be NO standard mount (VESA). You need a drill and a good skill for drill holes on this subject. I think that you must buy monitors that supports VESA brackets or buy the following combinations:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=8525135

  (Note: check the hardware compatibility)

  HP Pavilion 22xw/cw, cw/23xw, 24xw/cw, cw/25xw, 27xw/cw).

  Kind regards.

• Pavilion DV6 monitor via HDMI, Windows 7

  My Pavilion DV6 no longer shows the sign to display on the external monitor at the beginning upward. I found that if I open Notepad to display the sign on screen and then close it without signature on it then transfers the sign on screen to screen and everything works OK.  It only started doing this recently.

  I solved my problem, I have restored my adapter on a 2009 version driver.  The 2010 version has caused a problem in trying to open the NVIDIA Control Panel. It came with a drivor error.

• HP Pavilion 533w monitor don't exceed 4 bits

  Recently, I reformatted my HP Pavilion 533w with an OEM windows XP OS. Now I can't get my HP v70s monitor to work beyond 4 bits.

  weldsup101 wrote:
  

  Recently, I reformatted my HP Pavilion 533w with an OEM windows XP OS. Now I can't get my HP v70s monitor to work beyond 4 bits.

  You need to install the video driver--> download here

  You can find all the drivers for your computer on the software driver & download page here.

• Pavilion 20bw: monitor is blurry

  I have a Pavilion 20bw I had for 6 months. Everything has been working well and now it's blurred - to read a spreadsheet very difficult.

  I followed all the instructions on the troubleshooting page and downloaded the new driver and it still has not solved the problem.

  I have a laptop HP connected to this monitor.

  Hello @Trudyc1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your 20bw flag indicator shows a blurred image, and I'd be happy to help you in this case!

  I provided you with a few steps, you can try below:
  
  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer
  
  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. If the monitor still shows a blurred image, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.
  
  www.HP.com/contacthp/
  
  I hope this helps!
  
  Concerning

• Pavilion 25cw: monitor for laptop connection

  I just bought a new HP laptop, 360 want I use two monitors.  I have a HP Pavilion 25cw and bought a C of Type USB to VGA.  I have connected this to the monitor and the computer.  The computer makes a noise as if she recognized the connection, but the monitor never responded.  How can I fix this problem?  It worked with my old laptop very well.

  I went back to BB and returned cable to HDMI cable and now works properly.  I just need to address problem with monitors showing the same information instead of acting like a, I need to separate views.

• HP Pavilion f1503 monitor power

  Hello

  I need to replace my power supply (power cord and AC/DC adapter for my HP Pavilion f1503 LCD monitor. Can anyone advise where I can buy one?

  Thank you

  PartSurfer indicates 2 PSU but the 321811-001 can be found here

• HP Pavilion dv6837el monitor problem

  Hi all...

  I have a HP Pavilion dv6837el with nvidia geforce m8400gs, and since yesterday, I have some problems of monitor.

  When I start the laptop I see not the views of the bios loading, the monitor starts to run when windows is in place, too, the resolution does not work, is no more mine default option resolution, so I can see a huge black stripe to the right if I set 1024 x 860 and I see all the office if I try to lift it up.

  In addition, there is a strip from the top of the screen that recurs in the toolbar of windows launch.

  I tried to reinstall the nvidia driver, but nothing has changed.

  That is right.  Share of repair/replacement of the motherboard, there is no solution.

  There are a few without cool do it yourself videos from YouTube to try to repair the GPU problem.

  If you are not experienced with completely disassemble a laptop, which is not easy, so I do not recommend.

• Reviews for dual graphics card system with Pavilion a6130n monitor?

  I am keen to implement a system of double screen with Pavilion a6130n running Windows XP.  I tried to use edge nVidia GeForce with nVidia 2nd card in the expansion slot.  Apparently embedded is not usable with another card in place.  My next thought is to connect two monitors on a nVidia graphics card (using the VGA and DVI ports (with adaptor if necessary)).  Will this work?  Can anyone suggest a suitable video card to accomplish?  Thank you very much!

  No problemo.  Don't forget to remove the video driver on board.  You are looking for a large heat sink if you go with a passively cooled GPU.  The 7200GS runs HOT (80 c) with heat sink base (no fan).  Practically all dual DVI out 7xxx, 8xxx and 9xxx will support two monitors.

  http://support.Microsoft.com/kb/307873

• Pavilion M70 monitor and upgrade to Windows XP

  I upgraded my desktop computer Pavilion XL775 to Windows XP for me.  The monitor is a 17IN M70, using an NVIDIA Vanta AGP card.  After the upgrade, my monitor does not display a picture.  I have tried to download the new NVIDIA drivers and instructions from HP but no use.  The HP support page, I've referenced: http://support.hp.com/us-en/document/bph02073

  ANY help would be greatly appreciated.  Thank you!

  Thank you!

  1024 x 768 @ 60 Hz works fine for me now.

  When you install the M70 driver (by HP Web site mode), I got a message that said that it was necessary to the HPD04870. CIM file.  It turns out that the installer put it in the C \WINDOWS\OPTIONS\CABS folder.  After pointing to this file, I was able to reuse the monitor.

  Hope this info helps someone else...

• HP Pavilion 27xi monitor: monitor HP Pavilion 27xi: Mac Mini running Yosmite display problem

  
  

  Hello @adsben,

  I understand that the image quality for your HP monitor is poor when connected to your Mac Mini, and I'd be happy to help you in this case!

  According to this document on the use of Monitors HP on a Mac:

  "The HP monitors are not supported in a Mac environment. However, recent Macs use graphics with VESA modes and can display most of the HP LCD monitors. To do this, connect the monitor to the Mac, while the Mac is turned off and then turn on Mac. The monitor must operate at 60 Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment. »

  I hope this helps!

  Best regards

• Pavilion 23xi: turn off the power of the icon of the Pavilion 23xi monitor

  A small but annoying problem. Computer start-up that a small monitor icon appears in the upper right, sometimes at least covers the button. I can get rid of it by pressing the exit button, but next time think I start computer it is back. He follows me around the screen especially when writing emails.

  I'm sure it's easy to remove, but I passed the age by train, a lot of time looking at this site for the last questions, without success. There is an icon of the monitor on the taskbar to the top is totally useless.

  Hello @KN5530,

  Thanks for the quick response!

  From the information you provided, you can consider contacting the Support technique Dell to solve your problem.

  I hope this helps.

  Kind regards!

• HP pavilion AiO 23: can I connect a new laptop to hp Pavilion AiO monitor?

  Looking to buy a computer laptop but want to connect my monitor hp AiO, which is larger and of good quality. I just want to use the monitor only. Can I do this? How can I do this?

  Hi @TSquared1,

  I have check the technique and computer 23-b030z user guide.  Yes, you can connect your laptop to the HDMI port on the right side of the AOL and use it as a monitor.

  Note: the volume buttons on the PRINTER do not work for the HDMI input. It will be controlled by the laptop.

  If any portable computer with a HDMI port output will work.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.