HP Pavilion 533w monitor don't exceed 4 bits

Similar Questions

• HP Pavilion w2216h monitor repeating problems...

  Hello, I own a HP Pavilion w2216h monitor. It is the second that I own. The first has almost the same problem as the one I have now... but since it's on the warranty sent me a new. Now, it is up just like the old. I think that there is a fault to underscore with this monitor, but I'm not sure.

  The problem with the monitors is almost the same thing.

  The first monitor would have distorted color and lines of this violet/red/brown go through it, I don't remember if it was in the vertical or horizontal. It does not matter because it was under warranty and I got this new monitor sent me. Same model.

  For the second monitor, the screen gets very white, then slowly goes black. The colours seem to fade and blend each other. If left to run its course, ends with the screen goes black with shades of white and other colors in random places.

  Here's the info...

  HP Pavilion w2216h Monitor

  Computer HP Desktop running Windows 7 64-bit edition

  Graphics card is a Nvidia Geforce 9800GT

  It is connected to the VGA DVI cable. Connecting the monitor to the video card.

  Here's what I did and checked so far...

  I checked the video card carefully, the drivers are installed and up-to-date. Works well with 2 other monitors different brand and size. There is no overheating of any kind and the DVI connector works very well. So the problem is not with the video card. I checked all the cables! Swapped, cables and tight, raging, then tightened again to make sure.

  Recap. The computer is good, the video card is good, the DVI connector is good, the VGA cable is good. This leaves the monitor to blame. Now here's the question is it broken? Or can I fix? Also I'm the only person having this problem? If this isn't the case, please answer, cause I have the impression that it is a recurring problem for many people who own this product. Thank you for your time.

  Hello Rockets1995,
  
  If the screen is white that usually tells me that it is a bad connection. If you are still under warranty then you can start there.
  
  If you are not in the warranty and you want to try an auto repair then you can go that route as well. If you open the monitor there is a small tablecloth that connects the screen to the Board of Directors, this cable is likely in the open air and is not firmly connected.

• just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?

  just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?

  Hello

  The following link shows its specifications:

  http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =

  No speaker. Please try the following Nice monitor:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/MDP/accessories-88342--1/HP-Pavilion-touch-monitors--1

  Kind regards.

• HP Pavilion f2105 monitor: p8727aa

  My monitor has a black screen and the button flashes blue.  I unplugged and when I plug it back it continues to Flash blue with black screen.  Is - fixable?

  Hello @mrsq45,

  I understand that the HP Pavilion f2105 monitor power button is flashing and you are eager to fix it. I provided you with a few steps, you can try below:

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try different cables between your computer and your monitor.

  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting on the HP Forums. Have a great day!

• Acer ft200hql touch screen does not work w / HP Pavilion dv7-5000, Win 7 Pro 64-bit

  After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit.  I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work).  I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine.  All my drivers are up to date.  (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot).  A Microsoft Search to ensure the compatibility of the FT200HQL compatible shows and there's nothing I should do.  Help, please!  I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.

  Hello Jo,.

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  What version of Windows 7 is installed on your computer?

  To check the version of Windows 7 is installed on your computer, please use this link:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  You can then check the hardware compatibility of the touchscreen with your laptop device.

  See this link:

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  I suggest you to update the graphics card, and chipset drivers from the manufacturer's Web site.

  Use this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5051950

  I also suggest you to install the Vista driver in compatibility mode.

  Remove and reinstall this device in the Device Manager. To do this, use the following steps:

  a. right-click on the executable/program of the driver installation file, and then select the Compatibility tab.

  b. click the checkbox before you run this program in compatibility mode for option, and then select Windows Vista from the drop-down list. then try to install the device driver.

  Additional information:

  A touch screen does not work properly after that you resume a computer from sleep mode Windows 7

  http://support.Microsoft.com/kb/2405640

  Windows Touch

  http://Windows.Microsoft.com/en-us/Windows7/products/features/touch

  I hope this information helps.

  Please let us know if you need additional assistance. We will be happy to help you further.

  Thank you

• HP Pavilion 10-f001au: I need driver for HP Pavilion 10 - f001au for Windows 7 64-bit

  Hey well im new here, I can't fo my Pavilion 10-f001au for windows 7 64-bit driver please? Because my Driver CD is gone and I need to reinstal windows because I had some delay here.

  Do you have internet in 10-f001au?

  Touchpad

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65643.exe

  Realtek LAN driver (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65647.exe

  Realtek card reader driver

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65644.exe

  AMD graphics driver high definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66817.exe

  Driver Audio Realtek High definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65645.exe

• HP Pavilion dv7 Notebook PC: HP Pavilion dv7-4180us Entertainment Notebook PC + 64 - bit, Microsoft Windows 10 Home, SYS fragmented

  HP Pavilion dv7-4180us Entertainment Notebook PC + 64 - bit, Microsoft Windows 10 Home, fragmented hard drive SYSTEM optimizes, 100% fragmented.  Daveobs

  

  Hello

  Assuming that the hard drive has a style of mbr, system partition contains startup files and the Windows recovery environment and it is quite normal to show him the fragmentation - that partition should not be défragmentée, because it can cause problems with the loading of Windows.

  Kind regards

  DP - K

• driver Ethernet for HP pavilion 15-e006tu for windows 7 32 bit

  Please send the ethernet driver for HP pavilion 15-e006tu for windows 7 32 bit

  Thank you very much for the information. Download and install the Realtek LAN driver from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55979.exe

• Don't LabVIEW 64-bit included in Developer suite?

  Don't LabVIEW 64-bit included in Developer suite?

  The installation program is not included in the disks on Developer.  But he uses the license even exact 32-bit.  You can download installers site of NOR.

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• Drivers for HP Pavilion g6 2303tx for WIN 7 (32 bit)

  I need all drivers for HP Pavilion g6 2303tx for Windows 7 (32 bit), please help me...

  Hello:

  It will be difficult to run W7 32-bit on your model.  It is designed for W8 or W7 64-bit, and find the video drivers can be difficult.

  You can try most of the pilots of this professional HP laptop.

  The driver of the card reader won't work, because you have a Realtek card reader model.

  For the graphics, you install only the AMD video that will install the AMD and Intel drivers for two video cards.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&prodTypeId=321957&prodSeriesId=5229455&swLang=13&TaskID=135&swEnvOID=4053

  Try this driver 32-bit W7 Realtek card reader (device for PCI).

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5048664&swItem=ob-102008-1&prodNameId=5085436&swEnvOID=4062&swLang=13&taskId=135&mode=5

• Reviews for dual graphics card system with Pavilion a6130n monitor?

  I am keen to implement a system of double screen with Pavilion a6130n running Windows XP.  I tried to use edge nVidia GeForce with nVidia 2nd card in the expansion slot.  Apparently embedded is not usable with another card in place.  My next thought is to connect two monitors on a nVidia graphics card (using the VGA and DVI ports (with adaptor if necessary)).  Will this work?  Can anyone suggest a suitable video card to accomplish?  Thank you very much!

  No problemo.  Don't forget to remove the video driver on board.  You are looking for a large heat sink if you go with a passively cooled GPU.  The 7200GS runs HOT (80 c) with heat sink base (no fan).  Practically all dual DVI out 7xxx, 8xxx and 9xxx will support two monitors.

  http://support.Microsoft.com/kb/307873

• HP Pavilion 23xi: Desk Mount double HP Pavilion 23xi monitors

  Hello
  
  Is someone can you please tell me if it is possible to mount two monitors of 23xi hp pavilion on a double rack mount monitor office.
  
  Look at the back of the screen, it does not appear that there are screws for the monitors to climb.
  
  I just wanted to get this information before I go ahead and buy a monitor to double desk stand.
  
  Any information on this would be greatly appreciated.

  Hello

  There can be NO standard mount (VESA). You need a drill and a good skill for drill holes on this subject. I think that you must buy monitors that supports VESA brackets or buy the following combinations:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=8525135

  (Note: check the hardware compatibility)

  HP Pavilion 22xw/cw, cw/23xw, 24xw/cw, cw/25xw, 27xw/cw).

  Kind regards.

• Pavilion DV6 monitor via HDMI, Windows 7

  My Pavilion DV6 no longer shows the sign to display on the external monitor at the beginning upward. I found that if I open Notepad to display the sign on screen and then close it without signature on it then transfers the sign on screen to screen and everything works OK.  It only started doing this recently.

  I solved my problem, I have restored my adapter on a 2009 version driver.  The 2010 version has caused a problem in trying to open the NVIDIA Control Panel. It came with a drivor error.

• Pavilion 20bw: monitor is blurry

  I have a Pavilion 20bw I had for 6 months. Everything has been working well and now it's blurred - to read a spreadsheet very difficult.

  I followed all the instructions on the troubleshooting page and downloaded the new driver and it still has not solved the problem.

  I have a laptop HP connected to this monitor.

  Hello @Trudyc1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your 20bw flag indicator shows a blurred image, and I'd be happy to help you in this case!

  I provided you with a few steps, you can try below:
  
  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer
  
  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. If the monitor still shows a blurred image, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.
  
  www.HP.com/contacthp/
  
  I hope this helps!
  
  Concerning