Pavilion DV6 monitor via HDMI, Windows 7

Similar Questions

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Pavilion dv6 stuck on starting windows screen

  Pavilion dv6 stuck on starting windows screen.

  Memory test: past

  Smart check: past

  DST short: FAILURE

  FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

  PRODUCT ID: LF1374AV

  Hard drive 1

  Help, please. I bought a new internal hard drive. But I have no recovery disks.

  Thank you

  XPJ

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• HP Pavilion dv6-3190sl drivers for windows 8

  Hi guys, I want to hp Pavilion dv6-3190sl drivers for windows 8, can someone help me?

  Try this link to see if your model has been tested with Windows 8, and if there are drivers available:

  http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/BD-p/hardware

  I ran to your model and it is said that HP has not tested, which means that no specific driver Windows 8 have been posted.

  You did the upgrade of Windows 8? Most of the drivers Windows 7 good times works or Windows 8 will just install a driver. Some specific items like QuickLaunch HP had trouble with Windows 8, but you can probably find drivers for everything you have and help you here.

• 750se envy: envy of the brand new office no signal to the monitor via HDMI

  Just got my new 750se envy and 25 x 25 backlit monitor. After putting it all together, I connect the monitor of the Tower via HDMI. Tower boots, display lights, I pop in setting up the drive, but the monitor says that it cannot find a signal. I test my old monitor to the new Tower (a monitor of series pavilion aged 7 years). Same results. The Tower seems to be the treatment given that you can hear what it read the disc.
  
  I take another hdmi cable and and test exactly as described above. New monitor, new Tower and new hdmi cable still no signal. Old monitor, new Tower and new hdmi cable still no signal.
  
  Just to be sure, I plug my new monitor to my old HP Pavilion desktop computer. Tower lights up as usual, and the new monitor immediately comes to life with color. I can safwly guess it's the tower. I open the side panel and check all jacks to make sure they are warm and fully attached. Nothing seems to be loose or out of place.
  
  I start to sting online for answers. I met this reset of the BIOS. Press F10 to 8 seconds, down, 3 times arrow, enter twice and restart. Nothing. Still no signal. Can I assume there is something wrong with the Nvidia GeForce GTX 960 and windows the cause? Maybe turn hdmi ports are messy? It was the only other subjects I really found on the issue. Everything seems to work, just no signal between the monitor and Tower.

  89kowens

  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck

• Pavilion dv6-6c55se: My HDMI port is not working

  Hello

  I upgraded my windows to 8.1 - 64 bit and after that I found my HDMI port and Bluetooth does not work, since this page, I have Download Intel high definition (HD) Graphics Driver that complete the installation with an error that says:

  ---------------------------
  This computer does not meet the minimum requirements for installing the software.

  ---------------------------
  also, I downloaded Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows, but nothing happened, however, I'm prety sure that my bluetooth product is the Intel® PROSet/Wireless software for Bluetooth® technology (it was the previous windows driver) that I downloaded from this link, and it didn't work.

  I'd appreciate if someone helps me.

  Procuct model: pavilion dv6-6c55se

  Maybe your model didn't need driver wireless button.

  The dv6-7000 models require this driver running W8/8.1.

  Most of the older models do not use it, but I didn't know where the break was.

  I just guess that maybe that was the problem.

  Unfortunately, I don't have any other suggestions for you to try.

  I have rarely, if ever use bluetooth, so I have zero skills of troubleshooting for bluetooth.

• MacBook pro at 1920px external monitor via hdmi?

  I just got MacBook pro 13-inch retina and the default resolution is 1280px in width, and the maximum value is 1600px.

  If I connect the laptop to an external monitor via HMDI 1920px resolution, the resolution will actually be 1920, max mobile as 1600?

  You can set the external display to the monitor native resolution or HDMI resolution according to your preference.

  Don't use mirror display on external monitor because when you mirror on the screen display resolution is also in reverse. Use extended display mode.

• Max Resolution for external monitor via HDMI on Lenovo Y700?

  Hello

  I hope that someone has experience with external monitors on a computer laptop y700.

  I would like to ask if my laptop Y700 supports resolutions higher than 1920 x 1080 for external displays via HDMI.

  My model is:

  https://www.Amazon.de/Lenovo-i5-6300HQ-quad-core-Prozessor-Betriebssystem/DP/B016QB9HZK/ref=sr_1_2?i...

  I want to use a monitor with a resolution of: 2560 x 1080

  https://www.Amazon.de/DP/B00TF0X37I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&ColId=31RP1ZDSM66ZA&colii...

  Is this possible with my laptop. And it is even possible to connect a 4K screen?

  Thanks in advance for your help.

  So finally, I tried to connect my laptop to a 2560 x 1080 widescreen-resolution-display via HDMI in an electronics store:

  THIS MARKET! It is not a problem to run it with 2560 x 1080 at 60 Hz. The only problem might be a 4K resolution screen that it only works with 30 Hz, because it's an HDMI 1.4 port.

• Pavilion dv6: can't open Windows

  Hello! the start screen does not appear that I did the f8 road and made the Startup Repair and it says "Startup Repair could not detect a problem.
  
  The problem started after that I updated my Windows they didn't close properly. Do the system restore it says "no restore points were created on the system drive for my computer.
  
  And I have not either Image Retrieval System. Is there another way I can get my screen on people.

  Hi @mseven ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion dv6 Notebook and need to perform a restore without disks. Here is a document to show you how to do that with a step by step instructions. Here is a documenton how to perform a recovery of HP.

  If you have not created a recovery CD, This will show you how you could order it.

  Hope this helps you.

  Thank you.

• Can I run a VIZIO M260A HDTV as a second monitor via HDMI?

  Have a GeForce NVIDIA with DVI and HDMI ports.  Primary monitor is connected to the DVI connector.  VIZIO via HDMI connected, but it does not receive a signal, even if the NVIDIA Control Panel thinks that it is connected.

  Hello

  Try another HDMI cable or test the HDMI cable with other devices compatible HDTV.

  BTW, what is the primary monitor for resolution?

• Pavilion DV6 - 1247CL upgrade from Windows Vista to Windows 8. 1

  I want to improve my Pavilion DV6 - 1247 CL Windows Vista at Windows 8. 1. I read on the site of Microsoft support that the only way to upgrade Vista to Windows 8.1 must do a clean install of DVD. Will I have problems with the HP drivers, etc... ? If so, what should I do to avoid these problems?

  Yes there is no direct upgrade path from Vista to Windows 8. 1. I provide a counterpoint here. Your laptop is powerful enough to run Windows 8/8.1 and I bet all the drivers work just very rare possible exceptions that will be easy to fix. I would say what you can do to give up Vista is a good thing. You might want to consider Windows 7 as an alternative, but all that will take place in 7 runs generally 8/8.1.

• Pavilion Dv6 6159tx recovery of windows 7 after linux without recovery disks.

  I have pavilion dv6-6159tx computer laptop operating system Windows 7 Home Premium 64 - bit by default. I wanted to make my laptop to work in dual mode with Linux.But in this process has been formatted my whole hard drive. Now, I installed linux but I want windows 7 back. I also lost my recovery discs. I tried recovery disc to order from my laptop from the hp Web site but can't find it. I'm in a fix what to do now. Please provide me with as soon as possible. Desperately waiting for your answer

  Hello

  Here's another solution, that you could use.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally came with your laptop - IE Windows 7 Home Premium ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• HP Pavilion dv6-6c75ea Enterta: Recovery windows media 10

  Hello

  After a BIOS update the PC does not start correctly. When it starts it askes for recovery/repair windows media. How and where can I download that?

  BR

  Roger

  You're welcome, Roger.

  Someone must have upgraded your dv6-6c75ea, because this model initially provided with Windows 7 to factory.

  When you start from the disc W10 make you, on the lower left side of the installation window, there will be a repair option.

  You can choose that and in this menu, there are a few choices of repair.

  But if you must reinstall Windows 10, as I wrote earlier, you will not have a product key as long as W10 has been previously activated.

• Pavilion dv6-1350us Entertainm: Pavilion dv6-1350 us running Windows 7 will not be closed

  Have not used my laptop for the last 45 days and have not installed anything new. W7, 64-bit running. Just used on these days and it will not be closed. When I stopped it just hangs and displays that says: "if it please do not turn off or unplug your machine. Installation of update 1 of 1 ". This can last for hours.

  I stop it manually with the power button which of course translates message when I start again that «Windows did not close properly»

  I thought that since I had not used the computer laptop or literally turned on for about 45 days, that maybe I was missing a few important Windows updates, but when I go to Windows update via Control Panel and click on Windows Update to search for updates, it "just hangs" it thus, showing never updates available. Last update of the W installed was 26/03/16 and laptop worked OK.

  Any ideas?

  I downloaded ccleaner pro (first edition) and scanned the hard drive. I checked 'fix all issues' and it worked! Whatever files or conflicts on the register or wherever was causing the 'hang up' were eliminated obviously that my laptop was able to stop. :-)