HP pavilion g6-1201tx network problems
Earlier I installed windows 7 ultimate on my hp pavilion g6-1201tx, but the following drivers ha stopped working.
(1) BCM20702A0
Ethernet controller 2)
(3) network controller
(4) PCI device
5 PCI simple communication controller)
sm bus controller 6)
any suggestions?
Hello:
Here are links to the drivers you need.
Install in the order that I posted the...
Tags: Notebooks
Similar Questions
-
HP Pavilion 15 Possible network problem
Bought a Hp Pavilion 15-2513 p original supplied with Windows 8.1
However, I noticed that when I plug in an ethernet cable and perform a speedtest, speeds are massively a bottleneck. I think it's a driver issue, but I don't know which driver to use. I went to the Device Manager and noticed that the laptop has problems with Bluetooth and an unknown PCI device.
I also know of the network components is a PCI device so it could be related. A few tips on which driver should I use?
I have attached a screenshot of the Device Manager to help:
Hello:
If you have installed windows 7 you need these drivers...
Last one for the wireless...
Bluetooth (Bluetooth driver):
PCI device: you want the first driver on the list...
Ethernet: Download and install the 3rd driver on the list.
None of these devices that need drivers should have an effect on the performance of the ethernet cards / wireless.
The only thing that can help is the new wireless driver.
If it makes not a difference, then I don't know what could be the problem.
-
low audio on my computer hp laptop pavilion g4-1201tx
I use hp pavilion g4-1201tx, window 7 ultimate 64 bit.
My speakers produced his least when I play videos, this question is for 2 months and day after day sound from my speakers are reducing.
Hello
Try to uninstall and reinstall the sound drivers...
To uninstall go to control panel = > programs and features = > find the IDT Audio and uninstall (if the Wizard Uninstall displays a checkbox then check it)...
Restart the computer and download the audio driver for your laptop from the link below and check...
Driver high definition Audio (HD) DT
If the problem persists, you can try the steps in this link:
HP Notebook PC - solving Audio problems with external speakers, headphones, and HDMI Sound Devices
-
Cannot download the software due to a network problem
Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
I try to install Windows 10 with the version downloaded from the Microsoft Web site.
I finished uploaded and am trying to use Boot Camp to install Windows 10.
However, I faced a question and it is that he "cannot download the software due to a network problem".
I'm stuck here for an hour and I can't find a solution.
I did all right until now by the following online tutorial but it prevents me to continue.
Any help will be appreciated.
Thank you.It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support
Then, restart your Mac as usual and try to download the Windows support software again.
-
HP pavilion 15-ab522tx: wifi problem
When I surf the internet, I have several errors in dns which never gets fixed for troubleshooting. I tried to contact the service center, but all they do is to reinstall windows and all files m went whenever they do it! I've been there for more than 5 times, but no solution has been found and its almost 6 months today because I bought this laptop. I am facing this problem since the first day I got this laptop.
SOMEONE PLEASE HELP ME! REALLY ANNOYED WITH THIS PROBLEM
Hello @jay05,
Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!
I came across your post about the WiFi problem and wanted to help! I understand that you have found the DNS errors.
First of all, try to review the steps offered by Community Member
First of all, we have a step by step guide to guide you through the process of diagnosis here:
Troubleshooting your wireless network and Internet accessA second option is to try the following steps:
Powercycle the network:
1. turn off your laptop.
2. unplug the power to your router.
3. disconnect the power to your modem.
4. wait at least 45 seconds.
5 reconnect the modem and wait for it to come back online.
6 plug in the router and wait for it to come back online.
7. turn on your laptop and test your connection.
Turn off the power to the adapter:
1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
2. expand the network adapters.
3. right click on the Ethernet adapter / wireless, and then click Properties.
4. click on the power management tab.
5 remove the check mark next to allow the computer to turn off this device to save power.
6. click on OK.
7 test cycle.
Reset the TCP/IP settings on your PC:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
4 restart your PC and test.
It can also help to reset the winsock catalog:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
4 restart your PC and test.
Reinstall the NIC drivers:
1. download the drivers from here , but do not run them again.
2. go to your Start menu/screen and type Device Manager.
3. expand network adapters.
4. right click on the wireless adapter and choose uninstall.
5 install the drivers downloaded in step 1.
6. restart your PC and test.
Test an ethernet connection:
Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
Test another connection:
Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.Source: fixes Common for wireless connectivity problems.
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
HP Pavilion dv6-2106ea network controller
Hi guys,.
Ive followed the downgrading to xp post and I everything works except for HP Pavilion dv6-2106ea network controller, so wireless doesn't work. can someone point me in the right direction please as it starts to me the nerves...
Thank you
Do you have which driver tried? It is part 3 of the XP Guide.
Broadcom wireless Here
-
For pavilion a6030n wireless network adapter
Can anyone recommend a card for my Pavilion a6030n wireless network? Maybe a good router too?
Based on the specifications of your HP Pavilion a6030n desktop, you can use the traditional PCI cards and more recent PCIe wireless. In addition, you can also use an adapter without wire/USB dongle, if you do not want to open your computer.
I would say get a dual band 802.11 wireless network card b/g/n at least, but you might want a wireless 802.11 adapter ac its better range and throughput. With respect to the router, I suggest to get an ac wireless router.
802.11 b/g/n PCI/PCIe/adapters
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Pavilion g6 1201tx: Error retrieving system
During my recovery my computer hp laptop pavilion g6 1201tx, cto errors occurred. It says "missing c:/hp/bin/RStoneFUpdate.inf. I changed my hard drive last week. What should I do?
Sorry for my English...
Thank you for showing your interest in HP Forums
I would like to helpIf I understand the recovery has been attempted, and now there's a missing file error that appears on the screen,
It seems if the recovery was interrupted or if the recovery image was missing a file
I recommend that you use the HP recovery media if you have not already.
For more details on a post on the related HP Forum, please click here
I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
Good luck. -
Cannot install updates due to temporary network problems
Hi need help please teporary network problems are interfering with windows update
Read this: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395
Help us help you.
Is this relevant: you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
I have also recently set up a wireless network.Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good.
-
Original title: Windows XP and Outlook Express 6
I have a new computer with outlook express and went through the set up instructions. When I tried to send a test email, I got this error message:
"Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »
How can I fix this error message and have e-mail sent via Outlook?
Hi Jeanette Logan,Here is an article that addresses this issue. Follow the steps listed in the article for this problem: -
Cannot install the driver for Pavilion-dv6-Wireless-Network-Adapter-Drivers
So I just install a new copy of Win7 Ultimate 64-bit version and I'm having the hardest time for an installation driver for the wireless network card.
I was download the map and try to install at least 5/6 times but it will not yet appear in my device manager, or I am able to turn on the radio/satellite icon in my keyboard to turn on the wireless adapter.
I have spent the last 2 hours trying to get this to work without success.
Product number: A6Y56UA
Description: HP PAVILION DV6-6C11NR ENTERTAINMENT NOTEBOOK PCI followed the post on this thread and dl only adapter but it still wont ' appear in my book. It drives me crazy
Here is the link for the driver, you need to map wireless in this model.
http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp? lang = in & cc = us & prodTypeId = 32...
Hello warrantt,
Welcome to the HP Forums!
I understand that you can not install a wireless card with your computer. I'll do my best to help you! Here are both available for your laptop:
RALink 802.11 b/g/n WiFi Adapter
Try to download and install a. If one does not work, try the other. Please let me know your results and you see any errors. Thank you!
Mario
-
Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.
I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot. The computer is a Dell Dimension 2400. Any ideas?
Hi Jack,
Problem solved. I did 2 assumptions about the original problem. I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.
Thanks again
Greg
-
Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"
Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"
You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.
Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK
t-4-2
-
Vista unidentified network problem
My HP G60 laptop under vista home premium got an "unidentified network" problem and not able to get on the internet. I even tried to reinstall vista to factory default, still the same problem with my wireless router.
Spec:
-HP G60 laptop computer, running vista Home premium 32-bit, with 3 GB of RAM
-Belkin router
-I am able to connect via a fine wired line but with a Wi - Fi, it shows constantly 'unidentified network', even if I changed the Private mode in network and sharing Center.
-J' tried the following: listed an SSID different router, reset the router by default, to reinstall vista, tried other mechanisms, such as specified in the forum, with no difference
-When you configure the router, I have clone MAC of the laptop to the router to get the connection with Comcast, has done that with network cable connected, internet connection worked well after cloning.
-no virus SW installed.
Any suggestions on what might be the solution here? Thank you.
Hello
It seems that something is blocking the wireless to connect to the wireless router and to obtain a valid IP address.
Maybe this can help.
These steps and tell us where is the breaking point.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
------------------
The wireless card drivers much also install utility wireless of the seller.
Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).
----------------
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
party like Hello and NetMagic 3rd network managers can block local traffic too.
---------------------------
Stack TCP/IP work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
---------------------------------------------------
A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.
Above everything is OK, you must be able to connect to the router.
Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.
If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
Jack-MVP Windows Networking. WWW.EZLAN.NET
Maybe you are looking for
-
I dragged a URL in the URL box - in this case a 2nd Yahoo! email login address so I could quickly switch between accounts - in the toolbar links (the one with the "Most visited" link. Noting that the new URL link didn't have a Yahoo! icon I right cli
-
ENVY 15 t-k000 CTO: is this my Qualcomm Atheros AR9485 a bluetooth?
Greetings. I bougth my laptop like a Windows 7 (ENVY 15 t-k000 CTO) and updated for Windows 10... He says have bluetooth, but I never really used it. Now, I try but can't find any option to turn it on. I looked in Device Manager and all I get is my "
-
where can I download messenger 2008?
Where can I find the link to download Windows messenger 2008?
-
setting up eprint on Tablet and driod
I just create an account with the hp connected (using my normal email account) and set an account with snapfish (also using my normal e-mail account) and follow the 2 accounts that was necessary. While HP plugged in I had attributed the 8500 printe
-
Screens BSOD repeated last month - never known
I downloaded and installed the Debugging Tools for Windows to try to identify the problem - but a lot of data and not enough information (at least for me!). Can someone help me to interrogate these debugging/dumps files please? Thank you very much. T