HP Pavilion G6-2146sl: white screen after upgrading an AMD A6 - 4400 m for an AMD A10 - 5750 m

Similar Questions

• I have a white screen after upgrade windows 8.1 on HP Pavilion e005sv 15.

  I have white screen, only the mouse pointer after work

  upgrade Windows 8.1 on HP Pavilion e005sv 15.

  Any help please.

  I have not tried the updated graphics drivers again as my client must use the laptop. I'll get to try this weekend. Thanks for your help

• I have a white screen after upgrade windows 8.1 on HP Pavilion 15-e092se

  I have the blank screen, mouse pointer only works after upgrade windows windows on HP Pavilion 15-e092se 8.1.

  Any help please.

  Yes you are right

  I had installed version of bad for graphics drivers intel so I opend laptop in safe mode and then deleted bad drivers after that I restarted the laptop, then it opened again, once disappeared from the blank screen I installed the latest version of the graphics drivers intel BIOS driver from following link:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5394554#n402

  or you can download graphics drivers intel Web site to intel.

  Thank you

• White screen after Upgrade of Bios to 3.15 on X 200

  Nice day.

  Yesterday, I used the iso Bios updated the bios on my x 200.

  By following the instructions given on page [1]. After the reboot

  the system, as requested by the Bios-Update, the screen remains

  empty. There is no beep or any sign of life on the screen.

  Is there a way to fix this? Do I have to replace the motherboard, or

  is it possible to fix it "cheaper"?

  Thanks, Tobias

  [1] http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70348

  I would probley removing the HARD drive and try a reboot with chip ram only see if you get any Bios screen on reboot.

  The fact that this started only after you tried Flash bios probley means that your bios is damaged not a very easy thing to fix, so lead orgs surgestion to a bios recovery program.

  Looks like there are a few other bad similar experiences of bios update:

  http://Forum.Lenovo.com/T5/X-series-ThinkPad-Laptops/X301-won-t-start-after-BIOS-update/TD-p/150931

  Perhaps removing the CMOS battery could work for you as well

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• HP Pavilion #E1X77UA #ABL prod: is HP AMD A10-5750 compatible with Samsung SSD 850 Evo

  Hello

  I have HP Pavilion15 Notebook AMD A10 - 5750 M APU with product # E1X77UA # ABL could someone tell me if my cell phone is compatible with 250 GB Samsung SSD 850 EVO since I was going to upgrade. I did some research and could not find anything about compatibility.

  I really appreciate your help.

  Concerning

  Alex

  I took a chance and installed the SSD. It works very well.

  Thank you for your help.

• White screen after the upgrade, thoughts?

  Hello

  I have a mid-2011, 21.5 "iMac. When I upgraded from Yosemite to El Capitan, I got the white screen of death on restart. I saved time machine, reinstalled, and everything was fine. When I did the update niveau.1, the same has happened (white screen, then backup, and then reinstall) and now, last night, after le.2 upgraded the same story happened.

  When I run on the armored white mac disk utility, it shows all the hard drive as being full of the 'other', which is certainly not, but the drive is labeled as OK.

  Before I try reinstall, I want to know: what am I doing wrong? I'm upgrading via the App Store, I don't have a hackintosh, no illegal absurdity, etc.. But this problem is boring and repetitive, so I figure there must be something I do. Any thoughts?

  I got a grey screen for a few minutes, I came back a little later and I was looking at a login screen.

  The whole process has been about half an hour.

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• Wanted: White screen after 10 Windows Update - problem even when back in windows 8.1

  Hello

  I've updated to windows 10 and after a few hours, the main screen of my laptop went blank but my second monitor that I use with a HDMI cable still works.

  Here is a screenshot - one screen shows white and I'm typing this on screen 2 (continue below)

  I've updated my drivers in Device Manager but problem persists, here's my profile for screens and link to full

  (continue below photo)

  

  Complete specifications

  http://Speccy.Piriform.com/results/ZRXCgJC8x3PrsszxBodRVhn

  From my understanding the cables of the screen white screens LCD is still, this problem started after the update of Windows 10 so I'm reluctant to think it's that. My laptop is still under warranty but do not want to send in if he didn't need that I need for work.

  I found some information online saying that a restore Image will not work, but I have an and you can try it if need be.

  Other information found online says that my computer basically "forgot" that I have a main display to get out information in and make the screen and that's why my second screen works perfectly and me might be able to solve this problem with the start of the saving mode and try to fix it from there again I've never done this and don't want to cause more problems doing things like that.

  What could be the best way to go forward with this problem is to say. :

  * Is there a way to check the LCD cables without disassembling the computer. (Don't want to do that, and don't think it's the fault)

  * System Restore will help

  * Where / who should I contact for help in this regard

  Thanks for any help provided and please tell me if you need any other info to help. I really want to to fix the problem rather than take it to a guy or HP

  whitescreenUser

  It's a bad screen. The upgrade of Windows 10 timing is a coincidence. You can continue to use it as a desktop computer with an external monitor forever.

• White screen after that the virus KLPD, same save modus starts

  Hi, yesterday while surfing the internet has become my white screen, it was the virus KLPD. I found on the internet that I had to download the kaspersky rescue disk and run it on my pc so I could scan my pc on the virus and after that my pc should be normal. So I did what they asked, but now, whenever I start my pc, when I would have my office, I get a white screen and when I pres ctrl + alt + delete I can get in the menu but the management tasks does not start. Now my question how can I come back all my documents and work normal again to my laptop. Its a HP Pavilion dv6000 Entertainment PC.

  Thank you

  Hey AlexDedeur5,

  You may be able to create a Live CD. This is a CD with an alternative operating system that runs completely from a CD rather than your hard drive.

  Using a Live CD, you can access your hard disk just like you acceding to a flash drive. You can copy and paste your files from the hard drive of your laptop computer to a flash drive or external hard drive. You will need to scan that disc flash drive/external hard with a reliable anti-virus program before opening or transfer these files to avoid infecting a second computer.

  To get a very good Live CD is Knoppix. I used it before a couple times to get data from infected computers and hard drives, partially damaged by a fall. Here are some links that provide you with more information about Knoppix.

  How to recover data in Linux

  5 tips for using Knoppix to recover data to a PC starts plu

  How do to retrieve the files from the laptop with Windows crashed using the Knoppix CD

  Once your data is backed up and scanned with an antivirus, you will need to re - install Windows on the hard drive of your laptop. You can have a recovery partition which you can access by pressing F11 as the computer powers on. If you do not have the HP Recovery Manager, choose System Recovery to factory settings.

  If you are unable to the HP Recovery Manager, or it has been lost due to virus, you will need to re - install Windows with a set of recovery disks. If you do not already have your own records, you can order them through HP. If you could provide me with your exact product number (and your country if outside the United States), I could link you to your order for your particular laptop. Here are the steps to finding your product number.

  Please let me know if you have any questions or if one of these suggestions helped (this might help others with the same question). I'll keep an eye out for your answer!

• White screen after login (Vista)

  After updating my computer this morning, the screen now becomes white after I connect. I looked around for finding bugs, but so far I can't make anything of them because my screen does not return to normal. I tried to put it to sleep, hit escape and using the Windows key on my keyboard but I get no response from either of them. CTRL + Alt + Delete displays the usual screen, but none of the available options help to solve the problem.

  Translates into a safe mode black screen after log in and the same problems.

  I would try to do a system restore, but I don't have a disk for Vista.

  Hello

  A white screen may have the same root cause as a blackscreen and be too difficult to treat. Try
  This generic troubleshooting remember black and white the same fix would work. See following message
  If you can't at least win a minimum level of access work.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?