HP Pavilion g6 2202TX problems after update to 8.1 windows

Hello

Background:

Recently, I updated my windows 8 operating system windows 8.1 (64-bit)

2202TX assists in integrated Intel HD graphics 4000 & AMD Radeon 7670 M card (1 Gb)

Problem:

I noticed that my amd graphic card does not provide operating system. coz

  • in the dxdiag box I could see intel HD 4000
  • When I right click anywhere on the desktop and try to run the graphic properties, I got error that:
    "Catalyst Control Center cannot be started. Currently, there are some parameters that can be configured using Catalyst Control Center. »

So I checked assistant HP support for an updated driver, there is not. I had also installed all windows updates.

So I contacted HP and I have been asked to manually download drivers that are for version 8.1 of windows 2202TX.

Then, I installed it;

There, after I was due to problems.

1. in the graphic section, first of all I installed driver Intel graphics high definition (HD) (sp63753), in the process, that I got following error:

"This computer does not meet the minimum requirements for installing the software.
which is very strange because 2202TX meets the requirement set out in req system mentioned in the driver page.

2. then, I installed the graphics driver AMD high definition (HD) (sp59936), which has been installed successfully. but after restarting my laptop, after awhile I got following error:

"Catalyst Control Center: the host application has stopped working."

and I get the same error when I right click on the screen area and click graphics properties.

3. then when I installed Qualcomm Atheros QCA9000 series Wireless LAN Driver for Microsoft Windows (sp64255), I got following error:

"802.11 a/b/g/n wireless adapter device not found:
The device may not be present or could have been ejected/disconnected from the system.
abandonment of the installation, please insert the card and try Setup again"

So I run the Device Manager, and the driver for the network card "Ralink RT3290 802.11 bgn Wi - Fi adapter ' proved to work correctly.  and also the rest of them in that tree.

In addition,

4. "HP support assistant has stopped working" error if I try to open the same.

5. when it is run: dxdiag, I am following error:

"DxDiag has detected that there could be problem accessing Direct3D the last time this program was used.             You want to bypass Direct3D this time? »

Yes: I have not tried that!

No.: programs stopped working and closes.

6. when I right click any where on the desktop there is no user interface for Intel HD 4000 option, now it disappeared after the installation of the AMD graphics driver, where can I get the intel HD 4000 UI application?

Things I'm still trying:

 

Should I install this driver from amd's official website:

Check driver tool AMD Mobility Radeon™

http://support.AMD.com/en-us/download/mobile?OS=Windows%208.1%20-%2064

&

This

AMD Catalyst™ 13.11 Beta Driver for Windows

http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

In short:

problems with the graphics drivers and Catalyst Control Center

Problems with HP support assistant

Problems with atheros drivers qualcomm...

Please help me to resolve these issues.

Hey NiksDroid,

At this point the steps above should have solved the problem. Before installing the following drivers, please make a backup of your system, files and images. That way if something happens to the computer you won't lose any of your items.

Thank you very much for the information and images. My suggestion would be to first update your Chipset drivers.
Driver and Intel Chipset Installation utility
Intel Management Engine Interface (MEI) driver
After installation, restart your computer.

Then the next step would be to update the graphics drivers. Make sure that you first install the Intel driver and restart your computer before you install the AMD driver.
High definition (HD) of Intel Graphics Driver
AMD graphics driver high definition (HD)
Please restart your computer once more, after completing the installation of AMD.

Please let me know the results of the update, thanks.

Tags: Notebooks

Similar Questions

  • Pavilion g6 1202-TX: driver problems after update to 8.1 Windows

    Hello

    I've recently updated my product to 8.1 of Windows and even if I have material for a sound SRS surround, I can't find the software patches necessary to return my sound quality to its original levels of Dolby. I have already installed the IDT audio drivers available in support of the Web site forums always the his qualityy is very poor.

    In addition, after installation of the Qualcomm Atheros Wireless card driver from the support forum, my light on the adapter does not turn Orange and stays blue all the time.

    Kindly help me to solve these problems.

    Hi @Yuvraj_Gupta ,

    Welcome to the HP support community. I saw your post about the problems after the upgrade to Windows 8.1. You encounter some problems because there is no driver Windows 8.1 to your model, only Windows 7 and 8. This Driver de Audio IDT high-definition is the most recent that I can find, but I can't guarantee that it will work.

    For wireless light trying to install this Driver HP wireless button.  Once installed, you should be able to switch it off and on again.

  • HP Envy M6 64 bit problems after update to 8.1 windows

    Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty

    OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.

  • Prirnting problem after update to 8.1 Windows

    Hi all

    I am a single user on my laptop using a HP Laserjet 1018. Just updated to 8.1 and seem to have problems similar to many others. Printer worked fine on Windows 8, but not now.  A ran printing HP and doctor Scan and the printer worked fine. I then removed the cable to the USB port on laptop, she and tried to print again. Nothing. Turning the printer off it back and tried again. Nothing. Removed from the printer, added again and new trial system. Nothing. Downloaded the latest driver from HP site and tried again. Nothing. I also made sure that the print spooler and the Notifications and Extensions are running. Still no joy. I find it hard to believe that such a widespread problem has not been examined by Microsoft, HP, or both. I guess it's possible that some printers are no longer supported under 8.1, but would love to be told if this is the case. However, it seems that many users cannot use their printers and I was just wondering when this issue will be resolved by the person who is responsible. If anyone can enlighten me, I would be very grateful.

    Thank you very much

    Bobbler

    Hello @Bobbler,

    I thank very you much for the detailed response. I'm sorry to hear that your situation has become worse after trying some of the steps I have provided you and a few extra steps of your choice.

    One thing I want to clear up is because the printers Laserjet 1018, 1020 and 1022 are all in the same series, to continue the research I found that the installer is labelled 1020. The package install itself is labeled: LJ1018_1020_1022_Full_Solution.exe . So, to finally try to remove the Laserjet 1020 that appeared in the list programs and features, you might then see the two installed copies of the Laserjet 1018 on your system. It is strange that after removing one of the entries, both seem to remove it from your computer.

    I have to start by ensuring that the Laserjet 1018 is completely removed from your computer. I think at this moment that we need to focus on getting a clean slate to work.

    Uninstall the drivers:

    Please unplug your USB cable

    1. I would like to you launch by clicking on the following link: Microsoft: the problems that programs cannot be installed or uninstalled and running the tool by selecting the "Run Now" option on the right side.
    2. This Microsoft tool will run on your computer and remove all selected software and drivers who fail to uninstall in the traditional way.
    3. Let the tool to run and when you are prompted to select Uninstall
    4. A list of programs is now complete, do scroll down and look for anything related to the Laserjet 1018, 1020 or 1022. Delete them if they appear.
    5. When the tool has finished, you can open your start screen, and type "Notepad".
    6. Click the notebook to start the program
    7. When Notepad opens, just go to 'file' and select 'Print' and take a look in the print dialog box to ensure that a Laserjet 1018, 1020, 1022 or does not appear. If they don't show, simply close the window.

    Sometimes on Windows 7, Windows 8 and Windows 8.1 printers may not appear correctly in the file devices and printers. An easy way to see if there are duplicates of your product installed is by opening Notepad and simply check the print dialog window to see if they appear in there. If everything looks fine, so there aren't any duplicates installed.

    Solve printing problems:

    1. Then I'll have you click on the following link: Microsoft: solve printer problems
    2. Once the site opens, select 'step 2' on the left side and then click on the "Printing Troubleshooter" link in the middle of the page.
    3. This tool from Microsoft will find and solve different problems on a computer that could potentially cause printing problems. It will also identify and resolve the various problems of the registry on the computer.
    4. When the tool has finished, then we are ready to install the printer.

    Install the printer:

    Note: Leave disconnected USB until prompted

    1. Please select the following link to download new drivers for your printer: HP LaserJet Full Feature Software and Driver
    2. Click Download at the top left and just start the download
    3. Once the download is complete, simply follow the instructions on the screen to reinstall your product
    4. Connect the USB cable only when prompted
    5. Once the installation is complete, try to print!

    Note: The installation should appear with an 'install' option and not a new camera 'Add' or 'repair' option. Should 'add new device' or 'repair' appear it indicates that there are still drivers and software HP hides somewhere on your computer.

    Please let me know if the tools that I have provided and reinstall it solved your problem. Fingers crossed!

  • HD T410s graphic problem after update

    A few days ago, I decided to update my 2011 T410s by Lenovo
    Toolbox. I was looking for solutions to improve the battery life. I have
    has chosen to update all 'important' and some option updates
    those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

    Since I have lived a graphic break several times when I watch videos online such as
    thedailyshow.com or youtube.com. The first time a
    a message on the graphics driver (or something like that)
    has stopped working and has been restored but the next second the
    ventilation was repeated, monitor would go black and the
    graphics would begin slowly reappear, I'd still get a message
    on the graphics driver and the other second monitor would again
    black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
    the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

    Suggestions? Is someone else had problems after updating?

    Please uninstall the display driver, and reinstall.

    Also, install the latest player adobe flash.

    Please watch the video file online and then check it in.

    Best regards

    Tanuj

  • Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used it without a problem after update 2015 cc adobe photoshop

    Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used without any problem after update 2015 cc adobe photoshop...

    Just installed 9.4 ACR it works for my RAW files. Camera Raw 9.4 now available

    And the following cc 2015 windows updates installed.

    Updates Windows Photoshop CC 2015
    File download Size Date Notes
    Update Adobe Photoshop CC 2015.1.2 (64-bit) 352 MB 20/01/2016 16.1.2 release
    Update Adobe Photoshop CC 2015.1.1 (64-bit) 352 MB 14/12/2015 16.1.1 release
    Adobe Photoshop CC 2015.1 update (64-bit) 352 MB 30/11/2015 16.1 release
    Update Adobe Photoshop CC 2015.0.1 (64-bit) 258 MB 03/08/2015 16.0.1 release

  • G6 Pavilion: Pavilion g6 problems AFTER updating Windows 10 30 + days

    I have several HP Pavilion g6 mobile phones that receive the upgrade to Windows 10 guest. The first laptop that I have upgraded to Windows 10 as a test worked very well during the period of 30 days a computer OS can be returned to Windows 7 SP1. Once Microsoft updated the Win 10 install 30 days post and removed the possibility of returning to Windows 7, I started having problems where left mouse clicking on the icon start in the toolbar has no effect.

    I went to the HP site and discovered that HP had not tested the computer to win 10, as the only BIOS supported Windows 7 and HP does not have an interest in the update BIOS to win 10. If the problems continue, and HP does not update the BIOS or other drivers who have problems of compatibility of Windows 10, I have a year old perfectly good computer before it should be removed from junk food.

    You have all the patches recommended for ease of use of the g6 with Windows 10 Pavilion? It was working perfectly before the upgrade of the Microsoft OS last 30 days.

    Richard

    Without more than a number of model, if specific help can be offered.  There are a lot of portable G6, but I don't expect HP to issue a new BIOS for a model that is fairly old windows 10 test was not done.

    That being said, there is no reason for "I have a year old perfectly good computer before it should be removed from junk food."  I have not heard of this particular problem before.  BTW: It will work well as before returning to the operating system Windows 7 using the set of disks of recovery or the recovery Partition with the F11 option at startup.

  • Huge problems after updateing to 31.1.2

    Hello

    I encountered several problems after the update to 31.1.2.

    1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:

    The message send failed.
    The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.

    I have control over the mail server and reflected on the Messaging log and it said:

    2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
    2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
    2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]

    When I try to send mail.

    2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.

    3. all my entries in the missing calendar which is a very big problem for me.

    Best regards

    Andrija

    Close Thunderbird and go to your profile folder.
    There is a subfolder "extensions".
    Find the folder for both the lightning and Enigmail under "extensions" and delete them.

  • Problems after updating the BIOS on Satellite Pro P200

    I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

    After updating the BIOS, I have now two problems:

    1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

    2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

    Basically, I want to get everything working again as it should, but cannot find any information on these issues.

    After further review, it appears that the update of the BIOS is not the cause of the problems.

    Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

    After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

  • WiFi problem after updating iOS 9.3

    Your Wifi stop working on the iPhone 5 after update of iOS 9.3?

    My WiFi is fine

    To solve problems

    Settings - general - reset - reset the network settings

    (You have to re entry will save WiFi password)

  • Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

    Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

    DEB

    @DWESTDEWITT,

    Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

    If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

    Thanks again for posting and have a great day.

  • PROBLEMS AFTER UPDATE DOWNLOAD

    I downloaded the microsoft updates and after the closing down and restart computer download I received a message that says: updates not configured correctly coming changes
    Do not stop your computer.

    then it restarts continuously and again with the same error message and I am not able to enter the computer, etc.

    PLS HELP

    [Correction to Vista]

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    And read this info about the update settings:

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understanding Windows Update and Extras in Windows Vista at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    See you soon.

    Mick Murphy - Microsoft partner

  • WiFi problem after update of lollipop

    Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

    That's what I'll do, fix the phone with PCC

    PC Companion (CCP)

    Bridge (for Mac)

    Alternatives on how to backup Xperias

    http://talk.sonymobile.com/thread/36355

    and uninstall any antivirus > check again.

  • x 230 webcam problem after update 8.1

    As the title suggests, after the upgrade of the x 230 to windows 8.1 that my webcam is not working properly. Any program that tries to use he sees just a camera with an x on it. The webcam led is on, but I can't get a picture.

    Does anyone know how to fix this?

    I was able to solve the problem. Basically for anyone who has similar issues after upgrade to 8.1 Windows follow these steps:

    1.) press Fn + F6

    You open your settings for camera and microphone in the modern user interface. You should raise a pop asking you if you will allow an update of the parameters.

    2.) click on Yes, then when the file is finished downloading run it.

    3.) after that installation, you will need to restart.

    4.) after restart press Fn + F6 and click on the setting of the device. Uncheck private and your device will work once more.

    I must say that I really like the way lenovo has implemented these settings under Windows 8. Very smooth and well done.

    My only complaint is the Update Wizard could have easily scored it as a necessary upgrade and do it without having me to watch autour.

  • Dell Inspiron 3442 Maxx Audio problem after update of Windows 10

    I have seen a lot of posts on this same problem with Maxx Audio in Windows 10, however, I tried to fix it by trying different solutions, that users have given and I had no chance. I uninstalled the driver and reinstalled the Dell expects W10 and Maxx Audio controls do not work. Someone said that they have installed the old drivers for W8.1 and it worked again, I tried it and the controls are there, but when I try to disable Audio Maxx, it does nothing and I close the window, open again and the bar is activated if, it turns off. No idea if I'm doing something wrong? It's a problem very annoying for me since I work with many audio and now it sounds just awful! :(

    Much to my anger and regret, Dell didn't send any form of notification NO update to the platform Windows 10 and I did, then reverse it after seeing what a nightmare Windows 10 has, however, not only is now my audio DOES NOT WORK, but my departure to the top and stop sequence is ruined as well as on my laptop Dell.  I tired many times to count to reinstall the drivers for the audio, but it doesn't seem to recognize the audio driver of Dell on Microsoft which is also... UGH... Help... I WANT ONLY THINGS TO WORK AS BEFORE...

    SOMEONE THERE IDEAS FOR HELP?  THANK YOU FOR THE MILLION

Maybe you are looking for

  • Service management software

    I searched in vain for software to run with MAC iOS for our basement waterproofing company that makes: 1 plans/drawings 2. calculation of the costs/estimate 3 document management/production 4 contact management/progress hunting quotes 5. planning of

  • I added Wikipedia and Wikivoyage to my search engine and the icons are not there. How can I add them?

    In the search in the top right of my browser, I recently added Wikipedia and Wikivoyage as options, but the icons are not there. Instead, I have a blank white page instead of the icons. How can I fill them in? This also happens on my laptop which is

  • Double slot sxs pro recording

    Hi Peter / Sony,. Could you clarify if the cameras at the launch will record double slot? In the latest version of the United Nations responsible for book of Jon Fauer on f5/f55, page 44, he mentions that sxs double slot recording will now not be ava

  • Cannot play video DVDs

    I got a 2008 HP Pavilion dv9700 3GB 32-bit Notbook PC Vista Home Premium.  When I insert the DVD, nothing happens.  I get no start menu, nothing.  I can hear the DVD spinning for about 20 seconds, then nothing.  I open Windows Media Center and tried

  • Windows 7 cannot install

    Hey all, a first for me here. I have a computer on which a customer brought it's a made-to-measure machine that someone set up for him, although an amateur. Anywho, the machine is an Asus P8H77-M, a 2500 k, 2 x 4 GB DDR3 LG dvd/rw Sandisk SSD Due to