HP Pavilion g6: HP Pavilion g6 Will not start after Windows regular updates

Similar Questions

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.

• My HP Pavilion DV6 will not start after replacing the screen

  I just replaced a cracked screen by following the instructions in the maintenance manual and now it does not start. The power light turns on and the fan works but nothing else happens. What can I do to trouble shoot this problem?

  The most common problem is the connection of the cable to the screen.  Make sure that it is tight. Check the connection to the motherboard as well, but it's usually OK.

• HP Pavilion dv9260nr does not start after the bios update

  After the HP Health Check, it was recommended that I have updated to the current bios.  After you have downloaded and installed, the computer would not start.  Instead, it emits a long beep and 2 short beeps and the screen is blank.  How can I recover a bios update failed?  Is there a way to return the computer to the bios Setup?

  I thought I would post here to help others as I just spent 5 hours to fix this problem. I have personally experienced this on two different computers, both are model DV9260NR. I woke up in the long and short two beep power. The first time it happened, I tried to fix the BIOS by using the recovery disk, but it didn't work. I tried this using a USB floppy like any other player. The floppy drive should get accessible, then machine would be on a second beep then stop, but it would remain under tension. The first time around I gave up and eventually return it to HP as it was under warranty. This time above the current problem computer is more under warranty so I decided to test out of old college. After trying several discs crisis different Phoenix, I finally found one that worked.

  I downloaded crisdisk.zip here:

  http://www.mediafire.com/?3ccb9m0kv0m

  Followed by the latest bios from HP for the DV9260NR

  FTP://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42187.exe

  I used 7 - zip to extract the files in sp42187.exe and crisdisk.zip

  go to the folder where you extracted sp42187.exe and rename it to 30BBF2D. WPH into the BIOS. WPH

  Copy BIOS.wph to the folder where your snippet CRISDISK.zip

  I have created my disk in Vista, so don't worry about going "Real DOS".

  YOU MUST USE CRISDISK TO CREATE THE DISC!  SIMPLY COPY THE RIGHT FILES ON A FLOPPY DISK DID NOT WORK!

  Open a command prompt, I used command.com not cmd.exe

  CD to the folder CRISDISK.

  At the prompt enter: "CRISDISK. "BAT HAS:

  Finally, put in a blank disk and follow the instructions.

  Once the disk created, slap this puppy in a floppy USB drive and plug it into the computer.  I didn't need to use as or Windows + B, B FN hotkeys to trigger the BIOS recovery. The system entered in the BIOS for me recovery mode and tried to access the USB floppy.  I noticed that not all USB ports will work.  I plugged my USB stick, floppy to the next to the power supply.  If all goes well just turn on the computer with connected USB floppy drive and the disc in the drive. As before the system beeps once per second during playback of the disc.  The disk activity, arrested again, but this time that the system kept beep immediately after discontinuation of access to the drive.  These beeps point you out that the BIOS is flashed, it's just leave turn. When it was made the machine itself set off.  If yours is not, so I doubt that the BIOS recovery will succeed. I then unplugged the USB floppy drive, turned on again and to my surprise I was greeted by the HP and the BIOS logo!  I hope this helps people difficulty of their DV9260NR.  I met four dv9260nr machines and two of them does not update the BIOS using WinPhlash and the finished machine trashed, not good statistically.  I hope that others with the same model will be able to get their machinery running. I'd be curious to know if it works for others.  Post here if you are or do not succeed using this procedure. Good luck!

• DST-short failed: Windows 8 will not start after windows update.

  Hi, hope you can help.

  Laptop does not start (just goes to blank screen, not same logo).

  Start-up then F11 I get F11... Lower-left system recovery

  Finally, it goes in the HP logo and prepare the AutoFix and then clears the screen after awhile and then crashes.

  Commissioning market then F10, I get ESC... Start to break down on the left

  Finally, I get into test extended to the system and get:

  Processor control spent

  Verification of Smart Drive hard past

  Short hard drive DST check Failed

  Failure ID: 0u7r6c-6hq7gq-mfpx1a-60tv03

  Product ID: c6m50ea #abu

  Is there a quick glance upward for these error codes?

  I've seen similar errors, but different failure of id, most say replace the HARD drive.

  I reinstalled and reconnected the hard drive, does not.

  Powered off, removed the power cord and battery and drained (hold down the power button for 30 seconds) and reboot to anything will do.

  I have now no functionality on this pc. If I have to replace (1 TB) HARD drive, should I get HP, a set of recovery/usb disks (Web url?)?

  Any help/advice welcome

  Cheers, Rob

  Hello

  Yes, you must get a new one.
  If you have not already, you may have to order it from HP.

  http://support.HP.com/us-en/document/bph07143

  Contact HP:
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Concerning

  Visruth

• Computer will not start after windows checkdisk thing?

  My office has gone through a few microsoft checkdisk thing today (16\11\2010), and after that it's over, my com could not start more.

  It would be to start all the way until the logo Windows XP there and after loading was done and usually, it would be a blue screen with your user account, but however he just showed a black screen and I waited a certain 20 minutes and nothing happened.

  Then, I tried to reboot 10 times over and always to the same black screen.

  When I tried the thing Safe Mode would stop any loading at some point of the code, which is

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\DRIVERS\agp440.sys

  That's what was on my setup on my desktop that I accessed:

  "Primary Master" > Hitachi HDP72502
  Primary slave > no
  Secondary master > HL - DT - ST GCE-852
  Secondary slave > HL-DT-STDVD-ROM

  Basic version of the BIOS > V6.0
  Revision of BIOS 3.25 23/09/2003

  Anyone know what is happening and how can I solve this problem?

  In the Boot Options menu advanced F8, choose this option and describe the results:

  Disable the automatic restart in the event of system failure

  Let us know if you do not see this option in the Advanced Boot Options menu.

  You will not get far if you can't start something, so if you have a CD/DVD player, do you have a bootable XP Recovery Console in order to have room for manoeuvre, boot on the CD, run chkdsk /r and then you can start solving the problem (instructions below).

  You are once started in the Console recovery XP and after running chkdsk/r, then you will be able to see if KB324764 will help you.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Computer does not start after Windows 7 updates

  After the updates this week, Outlook crashed during an attempt to open the html emails.  I noticed that the Start button says to restart to be able to install the updates. Instead of restart, the screen went black.  I turned off and tried to turn on the computer.  Normally clicked and then dormant material.  Never on screen and remains black.  Have tried several times to disconnect all the equipment and power nothing doesn't.

  I have backups on an external hard drive but no ERD for Windows 7.  Read suggestions for open mode without failure etc. but if the SCREEN IS BLACK AND the COMPUTER don't YOU CAN t CHANGE THE PARAMETERS of START!

  Any ideas?

  Hi Joel,

  Thanks for posting your query in Microsoft Community.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2: If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 3: If after performing the above steps, you are able to start the computer and access the desktop then try to Uninstall KB3097877 update if it is installed, and then reinstall it.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• Satellite A205-S4607 does not start after windows vista update

  Hello

  I was installing updates in windows vista, but the battery was low and the computer is turned off, then, at the beginning of computer doesn´t, only the hard drive led is light but the screen is black, please can you help me?

  The model is Satellite A205-S4607

  It's not so easy...

  Try to remove the battery and unplug the AC adapter, then wait 30 to 40 minutes, plug in the AC adapter and try again. Maybe the problem is resolved.

  Give me a feedback, what happened.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Flash animations will not play after the flash update

  Hello

  It's really weird, but flash animations on most sites (sites like Ustream) will not play after that I updated the flash player. The funny thing is that on youtube play very well. I've tried disabling the addon of shockwave, relocation, etc., but nothing works. This problem is with firefox only because as the Chrome and Explorer the flash player works fine.

  Thank you.

  Thank you. In fact, it was not necessary because I have disabled protected mode flash and who did it. However, seems like it is not the best option but average tiem, I guess I have no choice.

  Thank you.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion g4 will not start

  I have a g4 Pavilion that will not pass the main logo at the beginning. I did a quick test of system and get software disk errors hard drive dst short. do you have a large trial and it also stops to with ¨type:system... result: failed¨ another test read ¨type: hard drive... result: failed¨ can I do to make it back or I get a new one, this laptop is not even a year old.  She has windows 8. I´d appreciate any help. Thank you.

  The hard drive has failed and needs to be replaced. Because the laptop is less than a year, you should still be under warranty. Contact HP support in your country /region and counts test results. Usually, they will send a new hard disk that is easily replaceable. If you have not created your recovery media you will need too... Worldwide contact information can be found here >Contact HP

• Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

  I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

  It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.