HP Pavilion HPE h8-1150z CTO D: which USB-3 PCI Card

Similar Questions

• PCI USB-3 D: CTO of HP Pavilion HPE h8-1150z

  Which USB-3 PCI card (make and model) would be compatible with my computer?   Is there anything that should be avoided?   The card may only be installed or is there some other changes/upgrades necessary to make it work correctly?

  Those who are supported by your operating system and comply with the PCI-e.

  Here are your specs:

  http://support.HP.com/us-en/document/c03117539

  I don't see the amount of PCI slots in the internal connections, but the graph shows clearly the three PCIx1 and if it is open, you can pop - a card.

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• I have a HP Pavilion HPE h8-1020 desktop PC which firewire card must be installed

  I have a HP Pavilion HPE h8-1020 desktop PC, which firewire card can I install?

  This widget could not be displayed.

• HP Pavilion HPE h8 - 1010t CTO D: the GPU upgrade, now the PC will be unbootable, or even POST

  I visit my father. We strive to upgrade the GPU in its Pavilion from HP running Windows 7.
  
  http://support.HP.com/us-en/product/HP-Pavilion-HPE-H8-1000-desktop-PC-series/5080764/model/5140202
  
  The PC was shipped originally with a GPU Radeon HD 6450 (1 GB). It has only 2 video, outputs and he wanted to add a third monitor. I recommended he buy a new GPU. He bought a 260 X XFX R7.
  
  http://xfxforce.com/en-us/products/.../AMD-Radeon-R7-260x-core-Edition-R7-260x-cnf4
  
  Also, we went to electronics, Fry's and bought a new power supply, a N500 Lepa, which is a power of 500w. We have successfully installed your new diet.
  
  Now, when I removed the old GPU, and put in the new GPU, PC turns on, the Red led light on the front comes on and stay red, but the PC unbootable. The screen is black, and it is not initialized.
  
  I once forgot to connect the power supply to the GPU. That day the PC started to boot the system & I was able to use logmein remote inside to turn it off, but once the machine was turned off again and I plugged the power of pin PCIexpress 6 pay-per-view, same behavior. PC is out of warranty w / HP, so that they are without help.
  
  I went to the website of HP and the BIOS update. still no luck.
  
  We have added some third-party RAM. I tried to remove the third-party RAM to see if it was the question. Does not solve it. I tried to remove the OEM ram and install just the 3rd part of RAM, but has not made a difference either.

  There is not BIOS version 8 available. Your situation is not a happy scenerio.

• HP Pavilion HPE h8-1200z CTO: update Win10 support video card power not on

  I need to upgrade to Win10. The current GeForce 7500 video in my HP Pavilion H8 1200z is not supported, and Nvidia is not writing a new driver for it.

  I bought a PowerColor Radeon HD5450 1 GB which is supported by Win10.

  My system will not produce any video when turned on after installing the HD5450 video card.

  There was a suggestion elsewhere on the web that I may need to update the MB BIOS to take in charge this "so-called" compatible PCIe card back.

  There is no latest BIOS listed on the site of HP for this Gigabyte MB support.

  Is it possible to get this video update of work in my PC?

  Yes, I'm puzzled as to why it doesn't work anymore.  Maybe try a Geforce 5 * series or 6 * series card that also supports Windows 10.  The real card that has begun is problem is not a great artist, then maybe a lower in the 5 * or Geforce card 6 * series will do.

• Pavilion HPE h8-1330z CTO: video card dying fan, tried to replace the card, the computer does not start

  This Pavilion comes preinstalled with a nVidia GeForce GT 630 graphics card. The fan on the card goes bad - the card smells "burny" when I run, the fan works really hard and the computer crashes while playing graphics-heavy games.

  I tried replacing a PNY Verto GeForce GT 730 2048 MB DDR3 card. But now, with the Verto installed, my flag starts, it crashes just on the HP splash screen. I can not start safe mode nor can I access the BIOS settings.

  Care of the Verto seemed to think it would work in my Pavilion - PCIe 2.0, at least 300W PSU. I searched online for help but can't find a solution for my problem.

  Any tips?

  I checked the support page for my Pavlillion and I noticed a updated driver for my computer's BIOS. I installed and it seems to have solved the problem.

• HP Pavilion HPE h8-1205eo: should I buy a new wlan card?

  I think that my Hp Pavilion HPE h8 - 1205eo:s wireless network card is broken. I can connect cable trought and everything, but he can't find any network without cable. I think I need a new card. I have a question before I go to things, might like wireless usb adapter work? Or do I have to buy a new card wlan? It would cost a lot less here where I live if I could buy a usb adapter... Thanks in advance.

  Good then the problem was with my wireless card, or should I say it was my fault. When I put on my new graphics card I accidentally pulled out the antennawire of my wireless network card. And now I feel very stupid but yes problem solved and all is good and working.

• HP Pavilion HPE h8 - 1070t CTO: I have HP computer win7. Hp support bogged down me? And how to fix it?

  I think HP Software Support's bogged down me.  I have Att U-verse internet.  But the pages are very slow to load. How can I find on which slows me down?  If it's the software of HP support how to stop or uninstall?

  I have cleaned and cleaned this computer without result on this issue.  I put all images on an external hard drive.  I'm free to 1.35 1.29 TB on C drive

  I made Super Spybot there is 2 things.  Cleaned with CC cleaner too.  Disabled a lot of addons.  I think that it is running a little faster now.  loading time is shorter.   Maybe the computer is getting old.   But thanks a lot for your help!   Happy new year!!

• HP Pavilion HPE h8 - 1260t CTO: stuck at the screen with the words "Press ESC for Boot Menu" on the bottom

  I unplugged the graphics card to clean dust. After that I connected everything again, he stuck to the blue screen with the words "Press ESC for Boot Menu" on the bottom. If I press ESC at the beginning, it will go to a black screen and it will show the basic information of the computer (information about the processor and memory). It also show this black screen, "Press ESC for Boot Menu" on the bottom and it will show "Start menu" in the lower right corner. If I press F8 at the beginning, it's going to be the same black screen, but it does not "Start menu" show in the lower right. If I press F10 at the beginning, it will go to the same black screen, and it will show "setup" in the lower right. Can someone help me solve this problem? And thank you very much!

  So I suggest to look at the following and try to 'Clear the CMOS settings' as described at the bottom of the page: HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-CH2 (Chicago).  Then see if there is no change at all.  If there is no improvement, then use the following http://www.hp.com/contacthp, fill in the form, create a folder for your question and then use the information to contact HP.

• Need driver Atheros gigabit ethernet for HP Pavilion HPE h8 - 1240t CTO desktop PC

  Mine has been altered.  I've not unhooked it and cannot find the driver on the support page for my PC model.  Find other versions, but they won't install.

  Help!

  Hello:

  Please see if this helps...

  Go to the Portal client Atheros and select AR813x_AR815x_v2.0.14.15_WHQL or AR816x_v2.0.14.15_WHQL under the headings AR813x_AR815x or AR816x.

  They are in. RAR format, so they need to be extracted using WinRAR, 7-Zip, or similar freeware.

  Paul

• Pavilion dv6t - 6 c 00 A1U55AV: which USB 3.0 driver should I use

  I have a HP Pavilion dv6t - 6 c 00 A1U55AV who had a hard drive failure. After replacing the drive and the installation of the operating system, I was able to get all the resettled drivers, but I'm not sure that I installed the right driver USB 3. I installed the driver from Renesas (v 2.1.19.0), but I'm not sure it's the right one. I have a USB 3 AC wireless card that said I could get faster speeds if I have the plugin into a USB port on the SS (which I do). Should I use the Fresco Logic 3 USB driver instead?

  Thank you!

  Hello

  Your machine is a machine CTO so virtually only, you know what it is. Please try to look at its hardware id to see:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.

• Desktop HP Pavilion HPE h8 - 1360t there rear USB ports?

  I have one of these order of HP computers. Everything I've read indicates there are USB ports on the front and the top of the unit. Nothing on the back. Not even a photo. Having the wires coming out of the front constantly ensure is ugly, in my opinion.

  Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360t CTO. Here are the specs because that's card mother IPMMB-FM (Formosa). According to the specifications;

  

  (#2) - USB 2.0: 4

  (#4) - USB 3.0: 2

• HP pavilion HPE-H8-1212: power upgrade graphics card is it useful?

  I currently have a HP pavilion HPE-H8-1212 with an AMD Radeon HD 7450 card with the standard power supply provided with the computer.  From now run many games on this machine with what graphics settings be better then adverage is a sad screen.  I don't need the best, but I was wondering if I could spend my power supply card and graphics mabye if need be to get the best out of this small computer for gaming?

  Does anyone have suggestions on what chart cards (best I can go) that are compatible with this machine as is?

  And/or what power upgrade level to if necessary to install a better graphics card - and which cards would be these (even better cards that would work on this machine)

  Thanks for any info

  Follow the advice given by Big_Dave Expert HP in the following thread.

  http://h30434.www3.HP.com/T5/desktop-hardware/HP-Pavilion-HPE-H8-1212c-graphic-card-compatibility/TD-p/3820114