Cannot configure RAID 10

Similar Questions

• Cannot configure RAID on UCS C220 M4

  I'm trying to setup a new M4 C220 however the option press to enter the WebBIOS RAID never appears.  I also went in MMIC and the only options in there set up RAID 0, 1 or 10 However, we want to use RAID 5.  I tried to reinstall my readers and my RAID controller.

  Hi Cameron

  Which option RAID you bought?

  Is based on the RAID card, you can only create RAID 0, 1, 10

  http://www.Cisco.com/c/en/us/products/servers-unified-computing/UCS-c-SE...

  See Cisco UCS C220 M4 Rack Server Data Sheet

  Modular Cisco 12 G SAS RAID controller
  You can choose the Cisco 12 G RAID SAS controller, which plugs into a dedicated RAID controller card slot. This RAID controller supports RAID 0, 1, 10 (without option FBWC) and supports up to RAID 0, 1, 10, 5, 6, 50, 60 (with FBWC option).

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• I can't download ADOBE Flash. The error message can't since Firefox. The other error message is "CANNOT CONFIGURATION of APPLICATION." Any suggestions?

  ADOBE downloaded 12.exe. FLASH will download, but will not be installed. The error message is "cannot CONFIGURE
  APPLICATION»

  Hello, please try with adobe offline installers that are available on https://www.adobe.com/products/flashplayer/distribution3.html (choose the package "Browser Plugin" for firefox).

• Cannot configure embedded card Gigabit Ethernet...

  Hello

  I am using Bootcamp 2.x with 10.6.x on a 2011 end pro macbook.

  Is Windows XP SP3

  I want (I need) using the integrated Ethernet Gigabit 10/100/1000 BASE-T, but cannot configure it!

  My Broadcom 802.11n wireless card is in place and works fine

  Documentation of the specifications Apple says:

  • Gigabit built-in 10/100/1000BASE-T Ethernet (RJ-45 connector)

  When I ran PC-Wizard, he told me:

  Network card:

  BCM57765 of Broadcom NetXtreme Gigabit Ethernet PCIe

  If I go to computer management program and open the list of Device Manager

  Card Ethernet is not visible in the list of network... and control has a ethernet cards? icon...

  How to proceed with the installation?

  Any advice?

  Thanks in advance

  You have the DVD with drivers?

  See also install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?

• Configurations RAID P70 delayed?

  I configured a P70 RAID1 with two 512 GB SSD of PCIeNVMe on 12/23. The date of planned construction was delayed several times, the latest of 29/01/16. Has anyone received a P70 with still configured RAID?

  The initial order was placed on 12/23. The system was supposed to ship 1/9, but back push twice. 1/27 is now the new date. I'll check tomorrow because we are 1 day behind manufacturing in China.

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• HP Pavilion notebook p073TX-15: we can configure RAID 0 in HP Pavilion notebook 15-p073TX

  Hello guys,.

  I just wanted to know if we can configure RAID 0 in HP Pavilion notebook 15-p073TX.

  Initially the laptop came with Win 8 however I changed it for Win 7 Ultimate and now I want to go back to win 8 and want to configure RAID 0 to speed up performance.

  Thank you

  Shuaib Ahmed

  Hi @Shauibahmed,

  Thank you for your response.

  As RAID is not an option for you, if the previous suggestions to help improve the performance and commissioning did not help, please contact HP support for help.  Please contact HP to Contact HP Supportassistance.

  Good luck!

• HELP for re - configure RAID

  I have a windows 8/4th GEN Envy 17 jo29nr. What they do not mention in the description of the form, it's that it comes with a 25 GB SSD for caching. In addition, the standard drive is a disk of 1 TB 5400 RPM / min. I removed the RAID to install an SSD, but now, I want to just put a 750 GB drive at 7200 RPM and reconfigure the RAID for the use of the Intel memory smart caching. But when I go to set up a RAID 0 volume, it will only allow me to (approximately) 44GB, twice the size of the available mSATA SSD. There is literally no option that will change that. Any help would be appreciated big time.

  Heretikos,

  When configuring RAID 0 with 2 hard disks of different size it always diminishes the largest room of the same size as the smallest for interlacing.

  The smallest mSATA SSD in the system is to set up the Cache and no RAID 0 in the Intel rapid storage technology. It's original installation on your laptop.

  Let me know if your still following this thread I'd like to talk with you more about this.

• "Windows cannot configure this wireless connection".

  I (birthday gift) a laptop Dell Inspiron 1011 with Windows XP Home Edition.  It has a "Dell Wireless 1397 WLAN Mini Card".  It works wirelessly at home but when far and try using WiFi access points, if I am looking for available networks, it comes up with "Windows cannot configure this wireless connection".  (She also comes up with this message at home if I search for the network, but works OK on everything that I established House).  I searched online and found a "fix" of Microsoft, but when I tried to use a time warning that "this type of file can harm my computer" so I gave up.

  Another area, I looked explained that the software other than Windows ensured control WiFi and it was not recommended to disable it.  (No doubt, it was the Dell software?)

  I'm very PC not literate and would appreciate any help very simple!

  Hi sligo123

  You can find this a bit confusing link.  I suggest that you enable the automatic configuration service (service Windows uses to control the wireless, rather than the Dell software).  Heres how:

  1. click on start, then run

  2. in the box, type C:/Windows\system32\services.msc/s

  3. click on OK

  4. in the window that appears, you should have a full range of services, scroll down until you find Windows Zero Configuration - double click on it

  5. in the box, make sure that the automatic option is selected in the drop-down list box.  Then click on the Start button.

  Try and then try to connect to the wireless network (you may have to connect to your home network)

  If this does not help, please post back here and we can try something else.

  Kind regards

  Daniel

  Profession: IT Administator for a small UK company | Level of Expertise: intermediate (self-taught)

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• When I remove my computer and try to connect to a different wireless network Iget "windows cannot configure the wireless connection" what can I do?

  My "wireless connection" screen does not show available networks, but gives me the message "Windows cannot configure this wireless connection".

  Should what changes I make to connect to different wireless routers?

  Hello

  You should try another network you know for sure that it is Public and open (as in the Starbucks or McDonald's).

  Wireless in general, http://www.ezlan.net/wireless.html