HP Pavilion series 500 drive DVD RW (e :))

Similar Questions

• HP Pavilion series g, cd/dvd

  What blank cd (number) would be just for hp pavillion series g and also dvd,.

  Thank you.

  Hello

  Go to a store of the computer or even many supermarkets, you'll find all the. They are of many brands, but can come from even a few factories in China. You can use most of them. I saw HP brand at my local supermarket.

  Kind regards.

• Pavilion 500-018: BD/DVD player not working not not on a pavilion of 500-018

  Hello

  I have a 500-018 Pavilion on the Bluray/DVD driver no longer works. The drive is detected in the BIOS but Windows 8.1, I can't access the drive at all. The drive is listed as a BD - ROM drive.  I tried uninstalling and reinstalling, but it doesn't help.

  I tried the diagnostic tool to sequentially play a DVD the disk and it says to insert a disc, even if there is already a disc inserted.

  Any suggestion?

  Thank you

  Gilbert

  Probably more likely.

  The probability is the laser that scans disks disappeared, so unfortunately for you I think that you might have to buy a new optical drive.

  --------

  Please give a boost to the top [ BRAVO ] to say thank you

  or if this solves your problem, please click "I accept as a Solution."

  I don't have any affiliation with HP, I'm just a customer like you.

• blocked password on hp pavilion series g what to do?

  blocked password on hp pavilion series g what to do?

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an application like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn this ISO properly on a blank CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K

• Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

  Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

  I'm having no problem with my DVD.

  Could you give more details about those who are out of work?

• Drive DVD DVP3950/12 does not play the converted videos

  Hello!

  My DVD DVP3950/12 player plays all videos I converted (hand brake).
  In my description are no valid information for the videocodecs that I use and it has no details for resolution. And what kind of audiocodec is able to play on my player?

  Could someone help me?

  THX!

  cluesa

  Is the drive DVD DVP3950/12 a Toshiba device?

• Help with the driver DvD Ram for satellite P10

  On my laptop (satellite p10) is Windows 2000 Professional running, but the driver DVD Ram of the Toshiba Homepage does not...
  Where can I get a driver that works on my laptop?

  Hi Val,

  The correct driver for your laptop running Wnidows 2000 should be version 3.0.8.0 and is available for download from the Web from Toshiba website.

  I presume that it is the one that you tried, so I don't know what you mean when you say that "it doesn't."

• Pavilion 15ab202tx: why I can not install hp pavilion 15 ab202tx driver for windows 7 64 bit

  why I can't install hp pavilion 15 ab202tx driver for windows 7 64 bit. For the most part not completed the pilot usb and network for

  LAN & Wlan.

  HP has posted only Windows 10 drivers for this model. @Paul_Tikkanen we can help to find the drivers for Windows 7?

• Pavilion p6267c format drive again after replacement with WD 10ezex how do I do?

  Pavilion p6267c hard drive failed, replacing a terrabyte WD 10ezex.  I have to format it?  If so, how? I have the recovery disc for the victory. 7.

  No need to format, even if you did the recovery HP would erase any formatting.

• Drive DVD RW E no longer works.

  Drive DVD RW E no longer works.

  I'm running a gateway T-1412 with Windows Vista Home Premium Service Pack 2

  DVD RW drive used to work fine, but now when I put music or a DVD in drive E that nothing happens. When I click on my computer and click on the E drive, it opens and tells me to insert a disc that has already been inserted.

  I have tried everything I can think of who isn't much so help is greatly needed.

  Thanks, Dan

  Hello

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  ---------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Drive DVD (E) does not work in a HP Windows Vista Premium system

  When I install a DVD in drive E, nothing happens.  MagicJack is installed on the computer and using the DVD player as well.

  In the device - drive DVD/CD-ROM Drives Manager - Tiger Jet CD-Rom USB Device (MagicJack) and TSSTCorp CDDVDW TS-L633M ATA devices are listed.

  Apparently the MagicJack drive does not drive the function E.

  Registry Editor fix by removing the UpperFilter and UpperFilter and reboot, lines did not work.

  Thank you

  RBB

  Try uplugging your magic Jack for a few seconds and install it back, it can set up an another hardware profile and take a next unassigned drive letter. Or change the drive letter of your DVD drive assignment:
  Click Start-> right click 'Computer'-> manage-> click on 'Continue' on the prompt UAC-> in "Computer management" slot, click on "Disk management" "Storage". On the right pane, right click on your DVD drive and click on «Change drive letter and path...» "-> click on the button 'change... '. "under-> assign a new drive letter.

• Cannot format drive DVD - Rw with Windows Vista.

  Cannot format drive DVD - Rw with Windows Vista. Download "Windows cannot format... or is unable to complete the format.  Something like that. See a solution with Windows 7, but I use Windows Vista. Help?

  Hello

  ·        What is the model number of your computer?

  ·        Who is the manufacturer of your computer?

  ·        Did you format the disc earlier?

  ·        Are you trying to format the drive using windows Explorer or through third party software?

  I suggest you read the web link, below he provided information related to the formatting of disk.

  http://support.Microsoft.com/kb/930405

  Hope the helps of information. Please post back and we do know.

• HP Pavilion dv7-3150eb (driver acpi\hpq0004)

  I have a problem with finding the right driver for my Hp Pavilion dv7-3150eb, driver specifications are acpi\hpq0004.

  There are other drivers to download, but I think I have a problem of compatibility in the parse error windows startup, it begins to take into account of 10tot1 with the option to cancel, it backs do not work becose I install another driver from acpi\hpq0004 .

  can someone help me to find the right driver for Windows7 64 bit home premium Hp Pavilion dv7-3150eb computer laptop acpi\hpq0004.

   

  Thanks for the won how do help.

   

  Greeting from Belgium.

   

  ENE CIR, ah yes... so check that ms document... try and apply the hotfix as well...

  http://support.Microsoft.com/kb/975778/en-us/

• New Graphic card of the HP Pavilion HPE-500-cs

  Hello, I have HP Pavilion HPE 500 - cs with win7 on it.

  Because I wanted to give my PC to my brother, I decided to keep the GTX 460 graphic card to give it a lower new Ge Force 9400 GT which I got from my friend. There is not a supply of radiator connector and PCI-E connector was reconected several times so it is not loose.

  But what is the problem. When I try to start the HP Pavilion with new GPU, it freezes just to the HP loading logo and I can't do anything.

  Is there a way to change the old GPU to give it the lowest?

  There is something on the forums on secure boot in the bios, but it's just for win8.

  Thank you

  Edit: Sorry for my mistake... I called the power as a PCI connector which of course isn´t

  Thank you very much, but now I see the problem in me.

  And it s because I have a different look in the bios and I can´t see the menus as it guides, but I remember that once it was like that.

  This would solve my problem if I could downgrade somehow it back.

  But still, thank you for your comment

• error message: "Please insert a disc into drive DVD D."

  I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

  Hello

  Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup