HP Pavilion Slimline s5610f, Win 7 64 bit, replace DH-16ABLH-HT2 optical drive?

Similar Questions

• Refurb new Pavilion Slimline s5610f, HARD drive advertised as 7200 RPM, watch 5400 RPM in speccy

  I don't know if it was just the misinformation on the Bestbuy description because it was a refurb or Speccy reading it wrong, but I just bought the refurb HP Pavilion Slimline s5610f was supposed to have a 7200 RPM HARD drive according to everything I read.
  This is the profile for HP http://h10025.www1.h...R1002_USEN#N455
  Here is the description of BB http://www.bestbuy.c...da914375cf8en02

  I looked around and everything indicates that the device of WDC WD64 00AAKS-65Z7B0 as being 7200 RPM SATA drive. Speccy also lists it as a 2 MB cache, which I don't think is correct, should be 16 MB, but I'm not too sure.

  Any help would be appreciated, as other ways to identify the number of towers disk and memory cache.

  Also wonder about this part of the form: data C7 Ultra DMA CRC Error Count 200 (177) 0000000019

  Who's 19 errors for the duration of the training?

  Of Speccy:
  Hard drives
  WDC WD64 00AAKS-65Z7B0 SATA drive
  Manufacturer Western Digital
  Business Unit / Desktop/WD Caviar® brand
  TR/MIN/Buffer Size or attribute 5400 RPM with 2 MB of cache
  Heads of 16
  16383 cylinders
  Type II-SATA 3.0 GB/s SATA
  Type of appliance fixed
  ATA Standard ATA8-ACS
  LBA 48 bit taken in charge
  Serial number WD-WCASYF167563
  Interface SATA
  625 GB
  full size 640,135,028,736 bytes
  Zero Type RAID
  S.M.A.R.T
  01 Read Error rate 200 (200 worst) features 0000000000
  03 spinup Time 162 (162) data 0000001324
  04 start/Stop Count 100 (100) data 0000000020
  05 reallocated sectors to count 200 (200) data 0000000000
  07 seek Error Rate 100 (253) data 0000000000
  09 hours (POH) powered 100 (100) given 000000001 B
  Spin Retry Count 0 to 100 (253) data 0000000000
  Attempts to recalibrate 0 b 100 (253) data 0000000000
  0c device Power Cycle Count 100 (100) given 000000001 has
  C0 Power-off retract count 200 (200) data 0000000007
  C1 Load/Unload Cycle Count 200 (200) data 000000001F
  C2 Temperature 118 (109) data 000000001D
  C4 number of events of reassigning 200 (200) given 0000000000
  C5 Current pending sector count 200 (200) given 0000000000
  C6, Incorrigible sector County 100 (253) data 0000000000
  C7 Ultra DMA CRC Error Count 200 (177) data 0000000019
  C8 write error rate / multi-zone error rate 100 (253) data 0000000000
  Temperature of 29 ° c.
  OK (less than 50 ° C) temperature range
  Good condition
  Partition 0
  Disk #0 Partition #0 partition ID
  Size of 100 MB
  Partition 1
  Disk #0 Partition #1 partition ID
  C: drive letter
  NTFS file system
  Volume serial number E4AF596B
  584 GB dimensions
  Used space GB 30.5 (6%)
  Free space GB 554 (94%)
  Partition 2
  Disk #0 Partition #2 partition ID
  Letter from D: drive
  NTFS file system
  Volume serial number 829DB1F3
  12.1 GB size
  Used 10.6 GB of space (88%)
  1.47 GB of free space on the (12%)

  Ask yourself why the unit was refurb can be intimidating. It's only cicra July2010.

  You perform these maintenance issues:

  Checkdisk http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/

  scannow http://pcsupport.about.com/od/toolsofthetrade/ht/sfc-scannow.htm

• drivers for Pavilion 15-n003sq win 7 32-bit

  Hello

  I can't find drivers for my hp Pavilion 15-n003sq with a win 7 32-bit operating system. Help, please!

  Below are the IDS of material for the non working devices:

  Network controller - hardware id:
  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40628086 & REV_63

  Ethernet contrloller - hardware id:
  PCI\VEN_10EC & DEV_8136 & SUBSYS_2166103C & REV_08

  SM Bus controller - hardware id:
  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2166103C & REV_04

  (USB) Universal Serial Bus controller
  hardware ID:
  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C & REV_04

  PCI device - hardware id:
  PCI\VEN_10EC & DEV_5227 & SUBSYS_2166103C & REV_01

  PCI Simple Communications Controller - hardware id:
  PCI\VEN_8086 & DEV_9C3A & SUBSYS_2166103C & REV_04

  Video controller 3D - hardware id:
  PCI\VEN_10DE & DEV_1292 & SUBSYS_2166103C & REV_A1

  Hello:

  Here are links to the drivers you need:

  SM Bus controller - material.  Install this driver first and then restart.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123677_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Video controller 3D - hardware id:

  Important... you need to first install the Intel HD graphics driver and restart.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23105&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  Then, install the graphics driver for PCI\VEN_10DE & DEV_1292

  http://www.nvidia.com/download/driverResults.aspx/68802/en-us

  Network controller: llisted first file is for W7 32 bit.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23329&lang=eng&OSVersion=Windows%207%20%20 * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Software % 20Applications % 0a 09% 09% 09% 09% 09% 09

  Contrloller Ethernet:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  (USB) Universal Serial Bus controller

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_121946_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI device

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI Simple Communications controller

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123657_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• drivers for Pavilion 15-n003sq win 7 64 bit

  Hello

  I can't find drivers for my hp Pavilion 15-n003sq with a win 7 64-bit operating system. Help, please!

  Below are the IDS of material for the non working devices:

  High definition (HD) of Intel Graphics Driver:

  PCI\VEN_8086 & DEV_0A16 & SUBSYS_2166103C & REV_09
  PCI\VEN_8086 & DEV_0A16 & SUBSYS_2166103C
  PCI\VEN_8086 & DEV_0A16 & CC_030000
  PCI\VEN_8086 & DEV_0A16 & CC_0300

  3D video controller:

  PCI\VEN_10DE & DEV_1292 & SUBSYS_2166103C & REV_A1
  PCI\VEN_10DE & DEV_1292 & SUBSYS_2166103C
  PCI\VEN_10DE & DEV_1292 & CC_030200
  PCI\VEN_10DE & DEV_1292 & CC_0302

  Hello:

  First install this driver...

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23106&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  Then install this driver...

  http://www.nvidia.com/download/driverResults.aspx/70187/en-us

• Portege R500 upgrade to Win 7 64 bit: lost and no scrolling touchpad driver

  Dear all,

  I have updated my portege R500 WIndows 7 64-bit OS and had the following problems:

  1. as a first step the touchpad scrolling has worked well (with no driver installed) but then it works more... so I tried a driver but
  2. There is no driver for the touchpad (Alps) which is recognized as a compatible mouse PS
  BTW, uninstalling and reinstalling didn't work and I searched a lot on the web but found no solution.

  I downloaded the drivers for VISTA 64 bit, is it safe to use?

  Appreciated advice, thank you.

  Simone

  Hello

  > I downloaded the drivers for VISTA 64 bit, is it safe to use?
  Yes, it s safe you can try to install the drivers for the touchpad for Vista in the worst case, you will get an error message that this driver is not compatible or will not work.

  But look man there is Win 7 Alps and Synaptics touchpad drivers for Win 7.
  The drivers were released for other series of laptop.
  Check the Satellite L500 area for example

  I have Win 7 64 bit drivers.
  Synaptics v14.0.11.0
  Alps Electric v7.x5.303.117

  Welcome them

• Drivers hp pavilion 14 - v043tx win 7 64 bit

  I can't find this driver to win 764-bit.

  Hello:

  Here is the link to the support page and drivers for your laptop...

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-14-V000-notebook-PC-series/6936223/model/7234487

• Pavilion 23-b320: Win 7 32 bit drivers Pavilion 23-b320

  Hi forum. New user here.

  I do a new install of Win7 32 bit on a Pavilion 23-b320 AIO. It must be 32-bit because of some software that will run on the device. I'm having a hard time find the drivers I need for this machine. All I find are 64-bit drivers. Can anyone help please? (And thanks in advance :))

  Hello:

  See if these drivers work...

  First install the drivers of the amd chipset and restart the PC.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  Then, install the graphics driver and restart the PC.  You want the 1 file on the Web page.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy3 & OS = Windows % 207% 20-% 2032

  Audio: Accept the agreement.  Download and install the driver from the 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langId=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false #High Definition Audio Codecs

  Ethernet: Download, unzip and run the application configuration of the 2nd on the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Card reader: download, unzip and run the Setup application to the first file on the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Wireless:

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61411.exe

• HP Pavilion 400-224 - Win 7 32 bit driver for USB

  A client asked me to load Win 7 Home Premium, 32-bit on his CV 400 - 224 office so that it can run some software owners.  I have loaded the operating system, but could not find the 32 bit drivers for the USB 3.0 hardware.  HP driver is 64-bit only.  The Intel driver for 32-bit file generates an error "your system does not have the minimum requirements.

  This looks like a Council of the laptop. Are there other HP desktop computers or laptops to this use this advice might have the correct 32-bit driver on the HP.COM web site?

  Hello:

  This model has an AMD processor and chipset specifications...

  http://support.HP.com/us-en/document/c04078971

  Here's the W7 32 bit graphic chipset and usb 3 drivers you need...

  Download and install the AMD Chipset drivers and reboot.  You want the first file on the Web page.

  To install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  Graphics card:

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2032#AMD-catalyst-packages

  If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

• Pavilion g6 1221et win 7 32 bit driver

  Hello world.

  When I bought pavilion laptop 1221et g6, it came with win7 home basic initial license. But ı formatted my pc and could not find win7 32 bit drivers on the hp website. Can someone find me win7 32-bit drivers for my laptop Pls?

  Hello:

  Most if not all W7 32-bit drivers of this model should work on yours.

  When you install the graphics, you install only the graphics drivers AMD, who will install the drivers for the AMD and Intel GPU.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c02859219&LC=en&OS=4062&product=5116802&sw_lang=&

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

• HP Pavilion Slimline s5610f PC, remove the battery

  Detailed description necessary on the removal of the batteries. I disassembled the PC to the removal of the C drive (following the instructions of disassembly HP). I see the battery, but it's not pop the case. Further disassembly is necessary (no information provided by HP).

  The CR2032 battery can be removed by pressing the latch in the direction of the arrow. You can use a nail, or choose the tooth.

  

• HP Pavilion 15-e041sc WIN 7 64 bit drivers

  Hi, I bought a new laptop and on assistance HP site is only for WIN8 drivers.

  In Device Manager, I have 2 components without driver. One that I found on this forum.

  1.

  PCI\VEN_10EC & DEV_8136 & SUBSYS_1970103C & REV_07
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1970103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  2 East-map chart - AMD Radeon HD M 8670 (drivers for Intel(r) HD Graphics is installed)

  HP support assistant not to download the device drivers

  PS: Sorry for my English, I'm from the Czech Republic

  Hello:

  Here is the link for the driver for your laptop ethernet.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You will have to search the Web for a solution install the graphics card because there is no W7 drivers from any laptop model HP that will work on your.

  What used to work was that you have installed the Intel HD graphics driver, while you have installed Net Framework 4.0 to Ms., then that you have installed the latest driver beta AMD since the AMD Web site, but I was informed that no longer works since AMD changed the Beta driver.

  I even found a laptop Lenovo with the exact graphics installation contained the driver from that work and gave the members of the forum to try, but it didn't work either.

  I think at this stage he is desperate.

  Perhaps you can prove me wrong.

• updating Win 7 32 bit to Win 7 64 bit with output formatting of HARD drive?

  For some reason any my Panasonic Toughbook came with Win 7 Pro 32-bit. The material is prepared according to manufacturer 64-bit. Who could ever think about buying the PC like this (quad CPU, 8 GB of RAM etc) is preloaded with 32-bit? In any case, I talked to people from panasonic, they say, it is not necessary to wipe the HARD drive to upgrade to 64 - bit. and sent the links to the drivers to install and procedures how to. The qUESTIONs ARE! Is it still possible? All programs and apps will work after installation? I'll be able to access the windows after upgrade. If I do a backup of files and settings in 32 bits can restore 64-bit so only the lost data? If not successful can I use same license key 32-bit here to install Win 7 Pro 64 bit. Has it been done before?

  Thank you for all the input

  As the computer was supposed to be provided with 32-bit Windows and 8 GB of RAM their technical knowledge should be considered as somewhat suspect. 32-bit Windows can access up to 3.2 GB (approx.) of RAM, it should be 4 GB, but for technical reasons, it can not, 8 GB would be useless.

  According to the original age of the computer, it only used to be quite true 64 bit software so if a computer has 4 GB of RAM or less, there was little interest in installing Windows x 64. Windows 7 x 64 increases the required minimum memory of 1 GB 2 GB same 4 GB of RAM is questionable, to get an advantage, that it should be more.

  I suspect the specifications of basic material for the system was such that the image of the master has x 32 and nobody at Panasonic said that if they offered an option for 8 GB they needed to provide a revised image.

  Normally OEM software provided as 32-bit or 64-bit, you don't get together in the peloton to the difference in detail so there may be a limitation as to what technique you can install. Then of course there is the problem of knowing where you are going to get the operating system. If the recovery of Panasonic's 32-bit all you have. Unless Panasonic brings that put you with a recovery disc 64-bit, you will need to provide your own license. You obviously have a case if they provided the spec of 8 GB to request a package of them FOC, but I doubt if they will respect.

• RALink wireless LAN 802.11n card and my WIN 8 64 bit PC error Code 31: no driver updates available

  22/12/2012 bought ASUS CM6780 PC running 64-bit. RALink Wireless LAN crashed my system twice in 10 months. ASUS support allows only a "System Restore" which means you start from scratch with ALL your programs, updates etc etc.
  I get the error code indicating 'Bad Image' with several pop-up window for what I am running, and the Ralink Lan has an error code 31 showing Windows cannot update.
  I have my 1 year warranty AND a 3 year warranty, I purchased in addition to this, but the ASUS support is lame. Only help to restore the system not to find a real solution, and when I ask a new LAN card, they do not respond.
  Is this a problem with updates of Windows or Ralink?
  Please advise, downtime for each episode runs more than 24 hours, restore my programs and update everything. I'm ready to trash or sell it!

  Send the minidump to analyze what is causing the BSOD,

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31).  So install the Ralink wireless driver.

• Unable to install Win 7 64 bit for the SSD, no device driver? Aurora ALX R4

  I have a Corsair Ls 60 GB SSD that i want to put my OS (OS currently on the HARD disk), iv tried to do a fresh install, but every time I do it asks me to connect a flash drive or a cd containing device drivers?

  IV looked on dell for the deployment of OS drivers, but there only those optional for monitors... I missed something really simple here?

  Sorry if this sounds vague.

  The value of the BIOS:
  SATA Mode = AHCI Mode
  = UEFI boot mode

  DVD Win7, Win-8-DVD or USB flash should start now. Use the one-time-starting F12 menu.

• WIN 7-64 bit / printer EPSON EPL-5800 L driver

  Hey,.
  is there anyone who knows a source for the above printer driver?
  The former (NT) who does not work with my new laptop satellite L 550 d-12F
  thx a lot
  thpuc

  Have you seen these two articles - the first indicates that an epl 5800 (without L) should install by following the instructions in section 2.
  [http://www.epson.co.uk/Printers-and-All-In-Ones/Laser/Epson-EPL-5800L/Drivers-Support?target=article&extn=.html&articleId=3394]
  [http://www.epson.co.uk/Printers-and-All-In-Ones/Laser/Epson-EPL-5800L/Drivers-Support?target=article&extn=.html&articleId=3529]