HP Pavilion TX1000: hp Pavilion tx1000
Hi, I'm hoping for some advice please.
My laptop acquired an HP Pavilion TX1000 step dad earlier - he was cast here, where he works, and he kept it. He has since bought a charger for him and it lights up, the splash screen appears but is password protected so we obviously can't go further.
Is it possible to recover back to factory settings? That will remove the accounts and password previous owner?
Can I do this via the bios as I did not physically for this laptop recovery disk?
A disc of recovery for another HP laptop would work?
Sorry for all the questions, I don't know what to do.
Thank you.
Hello
The machine will initially has a recovery on the HARD drive partition. If it is still intact, you can go as follows - this will remove all previous accounts of Windows and the associated password.
Judgment of the laptop.
Click on the f11 key follow-up as soon as you turn on and see if this starts Recovery Manager - complete description can be found on the link below, under "Start a restore from the hard drive and the computer is turned off".
http://support.HP.com/GB-en/document/c00809678
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please
Hello:
Here is the link for the driver you need.
Paul
-
Why can I not use my HP Pavilion tx1000 tablet form
I recently bought my computer off of ebay, HP Pavilion tx1000 tablet PC (tx1115nr (P / N:RV309UA #ABA)). The computer has been renovated and did not come with a stylus. Windows vista is the operating system. do I need a special stylus, or do I need other software. I contacted the seller and his answer was not the tablet PC are touchscreen. Well I can understand, but I'd still be able to use a STYLUS to take handwritten notes in windows journal / one note.
Hi chrisworden,
Check the link below for the manual for the HP Pavilion tx1000.
http://h10032.www1.HP.com/CTG/manual/c00853874.PDF
You will need to contact HP support or see the PDF above to see if this laptop model can serve as a tablet PC.
-
Hi, can anyone help or had the same problems?
My Pavilion began to get the white screen then screen went white a few days ago I turned off and rebooted but the computer will not now start upward?
This laptop was appauling, 3 x Ive had to use reinstall drive, I know several people with the same machine all have the same problems, but do not get all the answers that the warranty has expired.
It was a machine of £600 + and is only a little more than 18 months.
I hope someone can help
Thanks for reading
It is where I am now
Me and a co-worker had the same problem restarted 4 x 12 months from restore disk, wirless drivers disappeared, white screen 3/4 x now primer not? lights side lap top round, but nothing else.
I was in contact with HP, the only one to make a difference is to call this number with serial number and code-02076600906 of product (the number didn't work the 1st time but keep trying)
Explain what happened and if enough of do us that, then maybe HP will admit that there is a manufacturing problem and the recall and repair the Tower in mind for free-HP quoted me £256,00 to repair this laptop out of warranty. They have already recalled some portable Pavilion but are yet to recognize the problem with the TX1000.
Good luck I would like to know how you go.
SM
-
Pavilion tx1000: Reset bios password
Comes with system disabled 07926 s/n is CNF7510ZJV. WHAT CAN I DO?
Hello:
Enter the unlock code...
swab
If that one doesn't work, try this one...
mxhiqqq
-
HP pavilion tx1000: RAM upgrade
I want to upgrade Ram what is RAM max can be installed
Hello
This model supports maximum 2 GB memory... You can upgrade (2 x 1024 MB)
-
Pavilion tx1000 windows xp drivers
Hi all, this is my first hp Forum. I need help where can I download drivers for windows xp. hoping someone can help me. Thanks in advance.
Leinan
Hi, Leinan:
Most of these driver should work for this model, except the audio.
Audio:
First install the MS. UAA driver
First install the driver UAA MS and restart.
Then install the audio driver Realtek HD XP on the Realtek site.
Accept the agreement. Download and install the 6th on the list (first on green).
Paul
-
HP Pavilion tx1000: unknown Bios password
Last owner does not know the password, and I can't get into any operating system, or change anything in the BIOS without this password. After trying the password several times, I get "System disabled" [03410]
Thank you very much for any help!
Hello
Enter: irwpkxg
or
lwdoukh
Kind regards
DP - K
-
Canon MP 730 printer all-in-one more no signal my TX1000 HP pav. Entertainment Notebook PC
I have a Canon MP730 while a printer, a desk, a HP Pavilion Entertainment PC tx1000 laptop, a Wireless Linksys router.
The linksys wireless router is connected to the internet, the desktop computer is connected to the linksys, the printer is connected to the desktop computer.
The laptop at the same time was able to print wirelessly to the printer, but for one reason or another the popup of printer indicates now "the printer is offline," and now, the only way I can print from the laptop is to connect the printer to the laptop via the USB port. The printer is the default value for both PC and "add a printer" has been accomplished. still no go?
Printer etc drivers, have been deleted and re-installed in the desktop and computer laptop. The two PC of impression when it is connected via a cable to the USB port.
Wireless, laptop does not connect to the printer and print is no longer? Yet for one reason or another, at the same time it works great. I'm trying to figure this loss. Any suggestions on finding a solution to have the laptop works wireless, again to the printer would be greatly appreciated.
Thanks for your answers.
Doctrekker
Do one of the other features in addition to printing (such as scanning or fax) work on the network or are they all off? When you go to add a network printer on the laptop, is the spectacle of the printer upward on the laptop or it is totally absent? I suspect that the Office does not share the printer with the network correctly. Can perform you other functions of network OK (such as the transfer of files and others)? This means that the connection is OK, but the printer is not considered to be a part of the network. Do you know how to add a printer manually (without using "Add a printer")? http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems If so, give a try. Sometimes this works when the process of "Add a printer" is not working (and at least a 64 bit version of Vista, it's the only way to add a printer that works).
You have already updated the drivers, firmware or software. I guess that when you tried to add a printer, you chose a new name and a connection. Which excludes these options (assuming they were made correctly). Check the sharing options to make sure that the printer is shared, and there is no problem of permission. Check the options on the printer itself to ensure that it is configured properly - sometimes these willl change for no apparnt reason optionns and may not be detected by the computers or the printing software. I don't know what else to try.
I suggest that you contact Support technique Canon http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2110&fcategoryid=238&modelid=9035 and see if they can offer any assistance.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Hi after folding the sceen for less than a minute my notebooks screen went black
In addition all the lights on the screen (switch / stop, load button, etc.)
I was wondering if there is a way to solve this problem.
Laptop = Pavilion tx1215nr
screen = tx1000ennes96,
You have a problem with the motherboard.
You can make sure that the vents on the laptop are cleaned with a can of compressed air, but I think you need to take the laptop somewhere and have them look at the jury.
Here is a link for the telephone number of HP.
You can call and see if the unit is under warranty or if they repair for you options.
By clicking on the White Star congratulations on the left is a way of saying thanks!
I would like to know how everything goes.
Nice day.
-
Can I have the NVidia GeForce 8400gs card replaced in my Pavilion dv2700?
1 HP Pavilion DV2700
2 Windows Vista 32-bit
3. different messages which basically stated that the graphics driver (NVidia GeForce 8400 M GS) does not work correctly. Black screen, blue screen with crash dump, restarts spasmodically.
4. no changes to the system in addition to regular Windows updates.
5. Since the problem I updated the BIOS to the most recent and tried the NVidia HP driver, as well as from NVidia. Each driver carried out the same way. Currently have installed the version of HP.
Hello
It is not really practical to replace the graphics card because although it's called a 'map', it is actually physically soldered to the motherboard in the same way as a chip.
You may want one of the possibilities is to have the cards to the motherboard connection, converted using a service like the one on the link below.
Kind regards
DP - K
-
iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC. The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.
I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.
Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.
-
Pavilion dv7 6163 cl: unlock (reset) password on BIOS/CMOS for HP DV7 - 6163cl
The bios of my notebook (Pavilion dv7 6163 cl) blocked by password, and I never put a password. Could you help me solve?
Enter the wrong password 3 times or simply leave them blank and press success enter 3 times. You should get a stop code. This zip code here.
-
Pavilion 15: Bios password
I have a Pavilion 15-e022sa which I just can't get into the bios as it says I need a password that I never put someone could please help
Hello
Enter 60081217
Kind regards
DP - K
-
HP Pavilion dv7: unable to connect to the Internet
I can't access the Internet via ethernet or wireless. It seemed to happen after an update of Windows 10.
Other computer and android phone can access the wireless. When I click on the wireless icon, I see different networks, including mine. However, it is said, "No Internet, secure." I ran a diagnosis, saying that the wireless network adapter and the wired network adapter does not work. I tried to update the drivers, but to no avail.
I remove this update. I have HP Pavilion dv7, produces none. QJ799AV #ABA. It seems that there are no drivers for Windows 10.
Here in an Exchange I had with HP Support on Facebook:
Resolv_S wrote:
Hi@ekdman,
Thanks for stopping by the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.
For the best experience on HP forum, see our Guide to HP Forums to learn more.
Help with the purchase of a recovery media. Is this fair?
Thanks for sharing the question. I want to help you.
I understand the disadvantages that you went through to find the solution for the issue.
I would like to share a link to order you a recovery HP online support. Please use the link below to order the media.
I hope this helps. Please update the State of the question,
Happy announcement.
Resolv_S
Happy to help you. I work for HP
Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "Thanks for the reply. However, I took the chance to do a reset on my computer. And now I have access to the internet.
Maybe you are looking for
-
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2729450) Download size: 0 KB 0 minutes (downloaded; ready to install)A security issue has been identified that could allow an unauthenticated remote at
-
Help, my Acer aspire a D270 is not booting
I have a D270 an Aspire, i wanted to restore settins factory, but now I m impossible to start. It continuously displays the message "Setup is starting up" and finally gives message "windows cannot complete the installation.
-
.Lnk shortcut keys assigned are not respected on reboot
I like the keyboard shortcuts to common tasks/functions assignment (don't we all?). However, I noticed a distressing problem in which shortcut keys assigned to .lnk files are skipped during restarting and must be reassigned to work again. For example
-
Problem with sending SMS programmatically to multiple recipients:
Hello world I try to send information by SMS to multiple recipients at the same time programmatically. When I am trying to send SMS messages to a recipient, it works fine. I am able to send the data to a recipient successfully without any problems. B
-
SyncEventListener do not receive events
Hello I'm trying to listen to synchronization events, for example when a series synchronization starts and stops. For this, I am enrolled in a SyncEventListener with the SyncManager. Unfortunately, whenever I do a sync via USB, I never received any s