HP Pavillion Sleekbook 14-f023: upgrade to SSD

Similar Questions

• Pavillion DV6215CA: HARD drive upgrade to SSD

  Hello

  I want to change my HDD for one SSD Kingston V300 120 G. I think that my SATA controller is ver 1.0 (1.5 Gb/s) but I'm not sure. The SSD is ver 3.0 (6 Gb/s) with backward compatibility with ver 2.0 (3 Gb/s).

  Does anyone know the NVA of the controller on the DV6215CA or if it is possible to put a SSD in this notebook?

  Thank you

  Hello:

  Your laptop is a mobile intel 945 chipset series which only supports sata 1 (1.5 Gbps).

  For what it's worth, I recently installed and Intel 535 120 GB SATA III (6.0 Gbps) SSD in my notebook of professional HP nc6400 with the same chipset 945 like yours and it worked very well.

  The laptop is much more sensitive, even if the drive runs only 1/4 of its ability to transfer.

  Notepad starts a lot faster too.

• Satellite Pro L830 - 11G - upgrade to SSD, 2 SATA or SATA 3 connector?

  Hi all

  I recently bought a L830 - 11G, I would like to upgrade the SSD HARD, I can not find anywhere if this laptop is SATA 2 (3 Gb/s) or SATA 3 (6 Gb/s).

  The information is not in the online form.

  Can someone tell me what version it is?

  Hello

  I think that its SATA II (3Gbs)
  But if you know to check it out, I recommend you to install the software of SiSoft Sandra lite to get all the details of the hardware on your laptop.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• Pavillion Sleekbook 14-b110us: controller Univsersal Serial Bus (USB) driver

  I have installed Windows 7 (64 - bit) on my Pavillion Sleekbook 14-b110us.

  But the problem is that this laptop originally installed window 8 by HP.

  This is why all the drivers are not available for Windows 7 by HP.

  I installed by my self with a component.

  I need drivers as below.

  Universal Serial Bus (USB) controller PCI\VEN_1022 & DEV_7812 & SUBSYS_1937103C & REV_03\3 & 2411E6FE & 1 & 80

  I have try all the methods that I can get.    But I could ' t find the right drivers.

  Please help me.  Thank you.

  AMD USB 3.0 host controller

  https://community.AMD.com/thread/174273

• Dv6t Quad Edition 7300 ~ upgrade to ssd, compatibility?

  Dv6t Quad Edition 7300 ~ upgrade to ssd, compatibility?

  Hello!

  I have the laptop above on command and the first thing I'll do is to install an SSD. What I need to know is: is this SATA III computer? (who will determine which drive to buy) and what is the maximum size of the SSD that can be installed? (to determine which drive to buy) All the other tips are welcome!

  Thank you!!!

  Julesze wrote:

  Dv6t Quad Edition 7300 ~ upgrade to ssd, compatibility?

  Hello!

  I have the laptop above on command and the first thing I'll do is to install an SSD. What I need to know is: is this SATA III computer? (who will determine which drive to buy) and what is the maximum size of the SSD that can be installed? (to determine which drive to buy) All the other tips are welcome!

  Thank you!!!

  Hello

  This notebook is without a doubt SATA III. The size is more or less in your pocket. I prefer Corsair or readers Intel but Samsung and Kingston were also a few good products. I generally recommend buying any SSD with SandForce SATA controllers that readers have faster speed writing and in my opinion even better reliability.

• XPS 8500 upgrade to SSD

  looking to upgrade to SSD

  found v4 Crucial ssd of 32 GB with support for install

  you wonder if this will be fine as primary drive and keep the 1 TB drive already installed as storage device

  price looks ok

  any advice or assistance would be appreciated

  Do not forget that this system can work at 6 GB/s and the v4 can only run at 3 GB/s so an m4 would be better.

  This system has an mSATA port which is probably unoccupied. Also, I think that 32 GB is too little too small to install a Windows 7 operating system, I managed to install the operating system and office on a 64 GB we (my documents and files are elsewhere) and it is a boost for space; If you can afford it, I'd recommend the m4 SSD 128 GB mSATA: http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=050B0AA0A5CA7304

  Such a small disc can function as a Disk Cache, but it is more worth than his worth to implement.

  For other improvements, see: http://www.crucial.com/uk/upgrade/Dell-memory/XPS/XPS+8500-upgrades.html

• X100e upgrade to SSD - Apricorn EZ Gig II Fail

  X100e, W7 Pro 32. I'm upgrading to a concert of 80 X 25-M Intel SSD. I tried to Apricorn EZ Gig II cloning software and USB cable. (Original in the computer drive and the new drive connected to the USB.) When I installed the SSD, it wouldn't start. I don't know if it's due to problems of partition. (I does not change any of the original scores.)

  What is the easiest or best upgrade to SSD? I couldn't find step by step instructions. TIA.

  Hello

  Good point, Yangorang.  While the SSD is seen by the operating system as having "leads" and "sectors", information on SSDS are available as if it applied to DRAM in 4KiB pages (4 096 bytes).  If the SSD is partitioned so that departure of the disk volumes do not correct align, the SSD controller ends up having to perform several queries IO to access value of a sector of data because the information is stored on two pages of DRAM on the SSD.  At least, I think that this is how it works.

  Microsoft Windows Vista and Windows 7 handle automatically alignment of the handle for SSD (like new ' format Advanced' hard drives that use 4KiB sectors instead of 512 bytes) doing a clean install of the operating system should do cela a non-issue.

  However, you can perform a manual realignment operation to move the limits of the information stored on an SSD so that sectors and the pages correctly line up between them.

  There is an excellent analysis of the question, as well as instructions on how to solve it here on the support forum for the supplier, OCZ, RAM and an SSD.

  Kind regards

  Aryeh Goretsky

• HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

  Hello

  Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

  I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

  I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

  Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

  http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

  Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

  Thanks for your time.

  Hello

  The following link shows the specifications of your computer:

  http://support.HP.com/us-en/document/c03362810

  It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

  b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

  (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

  You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

  Kind regards.

• 14-b017cl Sleekbook: the 120 GB msata ssd make bootable

  Hi guys, I need your expertise!

  I installed a m500 crucial SSD 120 GB in my slot msata for use as drive system (NOT in the disk cache!).

  Before, I turned off acceleration of hard drive Intel Rapid Storage menu. I can see the SSD in the Explorer as a disk separate and clone my disk with Paragon partition migrate OS 4.0 SSD. However, in the BIOS (F.12) and in the startup options, the drive is not displayed. If I boot without the HARD drive no boot disk is found.

  Is this a BIOS problem / a BIOS update can resolve it? If so, since there is only an update of Win8, an update with Win7 would be possible somehow?

  I know that sleekbook material supports bootable SSD: I upgraded successfully a Sleekbook 14-b083eg to a 120 GB system msataSSD disk. (see CAT ID:48997789; Service Ticket number: 8066059670)
  Thanks a lot for your help!

  SEB

  It is specific to all HP laptops with the WSSD mSATA other than a couple of small business model for portable computers that use only hard drives WSSD. If you got the b083eg to boot from the WSSD with a disc present regular SATA just do whatever you did there once again and please post here because many people want to know how to do this.

• Upgrade to SSD for MacBook Pro 13 "(2011)

  I want to upgrade to a hard drive SSD for my notebook Early 2011 MacBook Pro.

  What are the specifications of the SSD looking?

  Is that the kind of 2.5 "(7mm)?"  I was looking at the card SanDisk Ultra II or similar model.

  What is the process or the workflow to change SSD?  (he just plug or do I need a prop?)

  I backed up my current HARD drive for Time Machine on a G-Drive external hard drive.  Can I restore my backup for the SSD of Time Machine, or are there additional steps?

  Thank you in advance.

  Any SSD with a box 2.5 "will be compatible with your MBP.  I recommend OWC SSD or critical based on my experience and other participants of CSA veterans.

  Installing the SSD is the same as for a traditional HARD drive.  Watch this video:

  https://eShop.MacSales.com/installvideos/macbookpro_13_unibody_early11_hd/

  You must format the SSD in Mac OS extended (journaled) disk utility.  You can use Time Machine to restore your data on the SSD.

  You can follow these guidelines:

  http://pondini.org/TM/19.html

  Ciao.

• 6 - 1014NR envy: HP Envy 6 - 1014 upgrade to SSD prompting the Installation Windows disc

  This laptop was purchased with a Windows 7 OS pre-installed.  A year ago, I took advantage of the free upgrade to Windows 10.  No problem and so far so good.
  
  Today, I decided to upgrade my factory HDD to SSD performance.   I clone the drive HARD integer using Macrium Reflect and he went ase expected.

  After passing on hard drives and cranking up the SSD, I am taken to the Windows Boot Manager screen.  It recognizes that I have a hardware change (HDD-> SDS) and he suggested that I demarrer start with Instalation of Windows disk, select language and next, before choosing the repair option.  How can I solve this problem I never got a Windows Setup disc (without CD player on this model)?

  In the Windows Boot Manager, there is a following screen to select an operating system.  Although I can see the Windows 10 option, after you have selected the option I need just to return to the Windows Boot Manager screen.

  You can provide any help would be appreciated.  Thanks in advance!

  You are the very welcome.

  Unfortunately, I do not know what W10 gives you the repair options.

  If there is a command line option, you can try running the repair options listed in the link below.

  They are for W7, but maybe W10 uses the same commands.

  https://support.Microsoft.com/en-us/KB/927392

  I would not invest too much time in the repair installation, because you will probably be able to clean install W10 and install all your programs and files in less time it will take to understand the problem (if you can).

• Satellite U300 - help hardware upgrade to SSD and RAM

  Hello world
  I want to completely upgrade my toshiba satellite U300-140, mount VISTA and default the technical features, posted above.

  I need your help to choose the best (and economic) device SSD and RAM slot. It is very important for me to know what is probably compatible with my device. Please, could you help me in your experience?

  And... an SSD is worthy, at the speed of my laptop? I was thinking about kingston 120 Gb or 240 GB V300

  http://www.Toshiba.it/discontinued-p...Lite-U300-14O/

  According to specification for laptop, you can be upgraded up to 4 GB RAM in order to use 2 x 2 GB of RAM. The compatible RAM modules have PA3513U-1M2G part number.

  I think with SSD, you shouldn't have any problems. I updated my old P500 with 250 GB Samsung 840 SSD and it works perfectly.

• Upgrade HDD/SSD 500 GB on Tecra R950-19th

  Hi all.

  I would like to know if it is possible to upgrade (buy and then replace) my HARD - SSD (256 GB) drive to a 500 GB/1 TB on my Tecra R950-19th.

  If so, you have online stores to suggest buying?

  Thank you.

  I think that it should be possible to use this HARD drive since the SATA controller is able to manage these sizes because of 48-bit LAB (Logical Block Addressing)
  Usually there is no big difference between HARD drive manufacturers, but I recommend you to check some reviews and read some article on HARD drive, you are interesting in.

  What you need is a SATA 2.5 HARD drive (speed is not question for the compatibility of devices)

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a