HP Photosmart 3210 all-in-one

Similar Questions

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.

  Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.

  I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.

  I have a PC with XP and a Mac with OS 10

  Computers are both connected to the modem wireless cable router.

  The printer is connected to the router via ethernet.

  I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).

  The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.

  I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.

  I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).

  If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.

  Thanks in advance for any help.

  Message edited by creeg on 30/09/2009 22:42

  For your Mac:

  If you're running Snow Leopard, the driver for the 3210 is compiled.  Open the applet Print & Fax under system preferences, then press [+] to add the printer.  For other versions of Mac OS, download the driver from here and run the installer.
   
  If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above.  Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)

  For the PC:

  The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name.  You can find the IP address and the host name by printing the network configuration page.

  Here is the sequence of manual installation of the printer driver for XP:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Photosmart 3210 all in one: cleaning the Scanner glass

  Hi people, has anyone ever tried to clean the static film under the glass of the scanner of a 3210 Photosmart all-in-one?

  Is it possible to get in without having to remove the entire top of th?

  Cordially Wrighty1

  OK thanks for the help Wrighty1

• HP PhotoSmart 3210 all-in-one: I NEED the icon on my desktop that allows me to do the scanning, cropping, the economy for this printer

  My computer crashed

  I got it running again (after taking it to the repair shop), but it must now install this icon that allows me to use all the features of the scanner.

  I have no idea where the disk is - I've looked everywhere, so I must assume he threw by accident (we had this printer for many years). It means that I try to find a way to do this without using the disk.

  I downloaded something on the HP site which allows me to use the scanner, but only allows me to reframe what I scan. This feature is extremely important for me because I use it for business and need to crop the photos all the time. For example, I tested it with a single photo 4 x 6 and it scanned all white spaces as well... which is usually not serious, but there is no feature of allowing me to reframe what part of the analysis, I wanted to save it.

  Please... oh please, please, please... let some knowledable, do-gooder see this post and help me with this...

  No, it wasn't she...  .. .but thank you very much for offering to help me

  BUT... After several attempts to search, we found what worked (oh, thank God!)

  http://support.HP.com/us-en/document/c03286146

  Click on the blue highlighted link in the first paragraph: HP print and Scan Doctor

• Photosmart 3210 all in one: Scan and reinstall the program failures

  Printer isn't online and firewall is on and no network.  Printer and scanner going good since 2006 until I tried to scan a negative, I think for the first time in its history.  Scan bar will quickly about 2 inches and lamp turns off and printer says to stop, but this isn't.   Had to unplug, but printer would reset with all functions (except movie option).  Uninstalled and reinstall failed with the error situation code 03215762.  Print function works with other programs and copy function works, just can't sweep, and there is no solution Center, could not reinstall.  Resettlement goes to 2% with the status - stop services - bogs and Print Spooler Service and will remain bogged down for hours until the end with the Task Manager.

  During the forced relocation ends and said deleting files, another error situation code 06458626 comes up with a few lines comes from installation error logs.  Help would be wonderful.

  Due to personal obligations, could not work on reinstalling printer until this week.  Put a link to MS and I've tried suggestions there - .NET updates, enter the registry and delete some files and a work-around suggested without success.  Next I googled "Can not stop spooler on MS XP SP3" and as choice went to forums.techguy.org/windows-xp/897775-can't-stop-spooler.html, Harry 32, January 28, 2010.  This guy had a sounding similar problem and his solution worked.  MS Fax in windows, computer components unchecked rebooted, went to spooler MS services, stop selected, and he stopped.  YES!  Then I ran the new drivers you sent and installed the program without glitches.  YES, once again! (actually when install stopped and said spooler was arrested and I wanted it to be fixed and started then the installation can continue; naturally, I selected Yes.)  I scanned a photo, printed and made a copy successfully.  However, I tried again to scan a negative from the solution Center and the button on the Panel of the printer without success.    I'll close this as 'select solution' and start a new discussion of assistance on the issue of negative scan.  Very gratedful for all your help.  I'd never know what Google if you had not discovered in troubleshooting spooler problem.

• Photosmart 3210 all-in-one: cannot install file for HP Photosmart 3210

  I have a file to install my HP 3210 printer. but when the file is unzipped on my PC, I have only the option 'leave', there used to be an option for the installation and uninstallation.
  Why is it not more this installation?
  I can't find the phone number for the Danish HP support, what a pity!

  This file: AIO_CDB_NET_FULL_WIN_130_141

  It should work well, even if HP provides no support for this printer more.
  I don't have a installation CD more.

  Hello

  Currently, you try using an installer of Windows 7, it is not intended for Windows 8.1

  Download and install the following drivers, these supports your printer and Windows 8.1-compatible:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Kind regards

  Shlomi

• XI Photosmart 3210 all-in-one: printer software CD is for the old version of windows and the printer is "retired".

  I tried to scan and I am not able to.  Screen says refer to device documentation to troubleshoot.  I pulled out my software CD to install since I recently moved computers and CD is not usable for this version of windows.

  How do I download so I can scan?  Printing is fine...

  Hello

  Thank you for using the HP forum.

  You can try painting WIA scanning:

  

  Thank you.

• Photosmart 3210 all-in - one: massive leak of hp 3210 ink

  Yellow Ink leakage.  Leaks around paper.  Change of ink cartage.  No change still leaks.

  Hi 3210JP,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

  1 HP Photosmart Premium all-in-One Printer (309 (a)

  2. Windows Vista 64-Bit family

  3. the general printer error 0x61000f6

  4. no change known to printer before developed problem

  0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.
  
  Let me know if it helps.

• Photosmart 2610: Photosmart 2610 All In One

  I recently had to reinstall my HP Photosmart 2610 all-in-one.

  I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

  When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

  However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

  Help!   hehehe

  Phil

  Try to reinstall the software, use thislink to dnload the driver full features and software.

• HP Photosmart 3110 all-in-one: compatibility Windows 10

  I wonder if HP Photosmart 3110 all-in-one printer is compatible with Windows 10?  If yes how to install the driver (I can't find the installation disk)?

  Hello

  A basic set of printing and scanning for your printer driver is available for Windows 10.

  As the link above provided by @banhien seems to be broken, follow this link to install the printer on Windows 10:

  http://support.HP.com/us-en/document/c01796879

  Kind regards

  Shlomi

• Photosmart 2575 all-in-one

  Hi all

  My Photosmart 2575 all in one printer 'number of copies' is stuck on 8 copies.  I have the number 1 everytime I go to print something. I can't seem to find where to go as she fixed to 1 copy.

  I hope somone out there has an answer.

  Thank you

  Ron

  Hello RBigTuna,

  Welcome to the HP Forums!

  I understand that the printer is stuck on 8 copies and you want to manipulate parameters. Please see page 73 (76/142) of the product manual to modify and adjust the settings. Please let me know the results. Thank you!

  Mario

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• How to install software for hp photosmart c5390 all-in-one on a windows 7...

  How do I install the software for HP Photosmart C5390 all-in-one on a windows 7. I don't have software cd for vista and mac.

  Hi Matt, thanks again for your quick response - which is certainly service 5 stars! Everything works fine now. I just got myself this new laptop - my first HP (Hp Pavilion DV7 6 c 80) and it is excellent, and I'm slowly he get it all set up. I can be naughty and ask you another question? I've (obviously) set up my hotmail on my HP. Do you know how I can remove my files from my old Toshiba Hotmail. I am giving my girlfriend and I want to set up his mail pop3 on it. Whenever I log into windows live mail on the Toshiba, my hotmail more old e-mails coming up on the screen.

  many ways, Ragnar.