XI Photosmart 3210 all-in-one: printer software CD is for the old version of windows and the printer is "retired".

Similar Questions

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• I have a Photosmart C6150 all-in-one printer and too HP software. I can remove it?

  I have a Photosmart C6150 all-in-one printer and too HP software.  I can remove it?

  I have HP customer Participation Program 7.0 (245 MB), HP Document Viewer 7.0 (3.09 MB), HP Imaging Device functions 8.0 (2.44 MB), HP Photosmart all-in-One software 9.0 (15.65 MB), HP Photosmart Essential (11.15 MB), HP Photosmart Prime Software 6.5 (245 MB), HP Photosmart, Officejet and Deskjet 7.0.A (44,35 MB), the HP software update (3.42 MB), HP solution Center 7.0 (3.09 MB). (see screen capture below)

  

  Hello

  It is to your liking, in fact BUT in the list if you want to use all functions, you must keep all except 'Participation program.

  Kind regards.

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• HP Photosmart 5520 All in One printer cancels an order of copy of the glass

  HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

  I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

  I used the doctor scanning HP and installed my printer again, but that has not helped.

  RodeDraak

  Hi RodeDraak,

  Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

  You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

  Issues when connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

• "" HP Photosmart e-all-in-one Pr: "HP Photosmart e-all-in-one printer - D110a installed 10 windows now scanner does not work

  Application of scan works

  Try download and install the driver and test the HP Photosmart Software Suite for your printer at http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-e-All-in-One-Printer-series---D1/4023244/model/4023245

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• Series of HP Photosmart 2610 all-in-one, print only in black and white

  Series HP Photosmart 2610 all-in-one (printer, fax, scanner, copier)

  Model SDGOB-0304-01

  Windows 7 32 bit

  I have changed black only, now cannot retrieve colors. Forgotten what I've done, so any help appreciated.

  In the printing preferences: -.

  1 Advanced color settings set to '0 '.

  2. choice of color - print in grayscale - 'unchecked '.

  3. within the framework of advanced document - print all text in black: (disabled)

  These measures appear to be in place. Have you, you click on apply after you have changed these settings.

  You can try uninstalling and reinstalling the software and drivers. This will reset all back.

• Photosmart 4700 all in one print but not scan

  My photosmart c4740 (all-in-one) printer will print but not scan

  Hi Donpaladino,

  1. What is the installed operating system on your computer?

  2. what happens when you try to scan documents?

  3. you receive an error message?

  I suggest you to follow the steps and check if it helps.

  Follow the steps in the link and check if that helps.

  HP Multifunction printers - I can't scan in Windows using the HP software

  If the problem persists, you can also check out the links and check if it helps.

  Scan and send (e-mail, send to folder, digital transmission, etc.)

• PriI impossible cannot print in color on my HP Photosmart C6180 all-in-One Printer.

  I can't print in color on my HP Photosmart C6180 all-in-One Printer.  I was not able to find the color preferences in the printer dialog box.  Any help?

  Try to uninstall and reinstall the software and drivers and see if it works for you.

• HP Photosmart C4280 all-in-One: HP Photosmart C4280 all-in - One Printer, Printer Wizard is lost

  After I've upgraded to Windows 10, I downloaded the HP software and re-installed my ols HP Photosmart C4280 all-in-One Printer, which works very well.  But now, I can't find a way to run wizard printer.  I want to scan a document, and there is no icon on the desktop to start the software.  Anyone know where I can find the Printer Wizard file to run in order to run this software and create a desktop icon?

  Because the Printer Wizard says that you have the software, we will check the computer again. Please type Solution Center in the box search and see if the program is displayed.

• Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

  Hi people,

  I searched many threads and found some tips to remedy this, tried and had no chance.

  I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

  Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

  I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

  What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

  Thank you

  Alex

   

  Screenshot of the update section:

  

  

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w

• HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

  dose

  All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

  Hello

  Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

  Good luck!

  http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.