HP Photosmart 7515 black lines

Similar Questions

• Photosmart 7515 adds lines from bottom of the scanned image

  My photosmart 7515 started just add a line double about 2 inches from the left edge of all of the scanned images. NO modification of the system that I am aware. Prins computer or internet as usual. Any ideas?

  Hi Bobvan1,

  Welcome to the Forums of HP Support! I see when you scan with your HP Photosmart 7515 he started to add a double line about 2 inches from the left edge.

  I would like that you start here: vertical, lines or streaks in the Copies or Scans, please fill ALL troubleshooting steps, focusing on cleaning.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP Photosmart 7520 black lines copies power automatic

  I get a black line on copies, but only when I use the automatic feeding.  Copies from the glass and printed documents have all the black lines.  It only occurs with automatic feeds.  What should I do to fic it?

  This morning I got up, took the printer in the kitchen and gave this narrow piece of glass under the feeder and the automatic charger a GOOD cleaning with a dry cloth.

  The problem has been resolved.

  Thank you very much!

• HP Photosmart, 7515 won't print black

  I tried all the recommendations, I could find nothing doesn't.  Head cleaned and followed instructions in the tools of the printer.  I know that many have had this same problem and have found a way to solve the problem.  Any recommendations?

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 7515.  Be sure to check the vents, as on the three solution.

  If the first four solutions do not resolve the problem I would say soak the printhead as described in the post here before considering to replace the print head.

• HP Photosmart 7515: Touch screen went black

  Printer works very well at the outbreak of the computer,

  but the touch screen went black, permanently.

  No matter how much I press, it stays black.

  I disconnected and reconnected.

  Downloaded a new driver that allows me to trigger the scan of the computer,

  but I can't fax.

  Is this a driver problem, a hardware problem...?  Don't know which firmware is.

  Hi @lenny15,

  Thank you for visiting the Forums from the HP Support! I understand the touch screen on your HP Photosmart 7515 is completely black, you are able to print from the computer, but can not access the front control panel.

  I would like that perform you a Hard Reset on the PS 7515:

  1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.

  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

  5. connect the power cord to the back of the printer.

  6. the printer should automatically power back upward. If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  If after the hard reset, you are still not able to access the Control Panel, I suggest that call you our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

• Photosmart C4450 scanner prints with a black line on the right side

  The need to issue to resolve, the RPG scanner with a completely black spot on one side of the page.  When used as a printer everything is OK

  Thank you

  Seth

  * Have you tried to clean the surface of the glass on the printer to ensure there are no particles causing this black line?

  * So, have you tried a hard reset of the printer?  Unplug the unit while on, disconnect the other end of the power cord of the direct plug, wait 30 seconds and plug in the.

  Try to plug in his own taken dedicated as well, because the electrical noise from other products can cause these lines in the analyses.  Also, check the steps in the document is located here.

  Let me know how it goes.

• Incoming Fax page, left thick black line down the side edge

  Hello

  I recently bought a HP Photosmart 7520 printer and had to return because of a wrong switch ON / OFF the printer.  So I returned and bought another. This second printer works perfectly so far!  However, when I recieive a fax, the page has a very thick Black Line crosses the length (less than an inch from top and down) on the left edge. It almost seems to be a template for a fax page?  The first printer (a returned) did not do that, but it does not appear on the second printer.  In addition, the original page fax I sent to my friend and he said, that it doesn't have a thick black line on the fax page, he gets... and then he sent me along a return fax with this black line appears.

  Comment of thoughts,

  SyBerGuy

  Hello

  For more than a week since my last post. And I also had the printer connected to an outlet of power strip surge protector (never needed to connect directly to a wall, which I would have if I had a problem).  The problem has been resolved by replacing the large black ink cartridge, which was not printing text.

  In addition, earlier when I check the ink level, he showed the graphics still about 1/4 rest in the cartridge. I had also previously clicked on tell me when the ink level is low. None of this happened?  So now I have to watch closely what is printing a page of text clean/good.

  So for now, the printer is good to go and I hope not to have more problems... thank you for your help!

  Sy

• Photosmart 7515: Impossible to connect wireless to Photosmart 7515

  First of all, the printer worked before end of June when a patch Win7 crashed and I had to reinstall the operating system. I immediately upgraded to Windows 10; I am running anniversary of Windows Update (AU). I don't have reinstall the printer before last night. I am running Windows 10 a a full charge 18 Alienware. I am writing from this computer so I'm connected to the Internet and I'm connected wireless.

  I download the updated 2016 (PS7510_1315 - 1.exe) displayed for my printer and installed it, but when it came time to connect to the printer, it didn't - do not see the printer.

  I've reconfigured the printer twice and during each installation, the printer sees all networks wireless (including me), I select my network, the printer asks the password of my network and then it connects successfully to my SSID. I print the results of the wireless network Test with the bottom line of "no problem found" for the correct SSID. My computer is connected to the same SSID. On the printer, the blue wireless light is solid on and signal strength is displayed on the printer shows also strong.

  I then connected to my router and updated all the connected systems. The display shows four wireless devices, one being the printer. The printer didn't show the MAC address, not a name or one IP address like the other three, then I restarted the routed with the same results. Then, I opened an OS command window and ping the IP address - failed with "request timed out" and "destination host unreachable".

  So, I'm looking for help. The printer says that it is connected properly wireless with intense beep and a DHCP IP address which is also in the appropriate interval. I also tried the host name: dhcppc3 and that did not work (didn't expect really, since the INVESTIGATION period did not work but I wanted to be thorough).
  In advance, thank you!

  Nick.

  Hi @LoneRider,

  Thanks for joining the Forums of HP Support for a solution to your connection problem.

  I understand you're rying to connect a HP Photosmart 7515 e-all-in-one printer wireless to a computer Windows 10, but the installation failed because he wasn't able to find the printer. I would like to help with that.

  Here is a document of support designed to be used with this problem - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• my printer is copying with a black line in the middle of the page

  My printer has just started the copy with a black line in the middle of the page.  Any ideas what the problem is and how to fix it?

  I have a Photosmart C7280 all-in-one printer.  Thank you!

  This document should help:

  Scan quality

• Using every night and compared to IE where I don't have a problem, there are black lines on all the pages of certain facilities of forum. Have screenshot.

  At first, I was told it was my video driver, but maybe it could be the motherboard. However, IE on the same pages of vBulletin does not horizontal black lines thin and thick, as shown in my screen shopt.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• IPod nano 7 icon appears in iTunes, with Windows 8 or IP on both computers. Two nano 5s work perfectly. Short black lines appeared on the screen iPod

  NO icon of nano 7 will appear on iTunes despite trying 2 computers, Ip and win 8. Also tried two nano 5s and several cables and ports. Also, some black lines on the screen.

  What is "Intellectual property"?  Did you mean to type XP?  There is no iPod nano "5s". are these 5th gen iPod nanos?  Why do we say "iPod nano (6th generation)" in your profile in?  It's the iPod nano with the gen 7 problem?

  If the 7th gen iPod nano is new (model 2015), it does not work with a version of iTunes that runs on Windows XP.  It should work with the current latest version of iTunes on the computer of Windows 8, however.

• Vertical black line on Portege 3500

  My P3500 screen suddenly started showing a vertical black line with interference on the right hand third of the monitor. The line disappears after about 15 minutes, but still the interference. I plugged an external display that shows no display problem.

  Hello

  If the monitor external don t show any problem, to certainly show a malfunction. Try contacting the Service of your country partner. Explain exactly what is happening. I'm sure they will know immediately what the problem is.

• Cannot use the button Delete, build, forward, or any box above. There is a black line through each box.

  There is a black line through deleting it, the answer, the next high school & page E-mail t button. It I cannot select any option. E-mail works fine in Internet Explorer. Please help find my e-mail options.

  It seems that the same problem has happened once with Gmail. The proposed solution can be seen here, although he did not have all the answers: override system colors

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.