my printer is copying with a black line in the middle of the page

Similar Questions

• Problem with 'small black line at the right margin' with Folio Builder / Viewer to Adobe in the Ipad. ID CC.

  Hello

  When I create a Folio Builder and I check my project Id in the Adobe viewer (sometimes in the Ipad app and Desktop Viewer), I can see a black line at the right margin (maybe 4 px). And I can not set my background (it is an object with a color) to use the "full resolution available to the app in the ipad" and Yes, I'm using rules and I see that my object wallpaper is 1024 x 768. I tried several projects and upgraded the project for the "30" version

  But I am a new user with the ID/DPS. So, is this a bug reported? Or I'm doing sth wrong?

  And for me, the most important issue, will fix this when I send my project to the applestore and DPS transform my Folio to the store? Or what I see now that's what I'm going to see?

  Thank you!

  Sorry! I found an answer here in the discussion:

  http://forums.Adobe.com/message/5835960#5835960

  So the problem will be solved in the final application, and it's just the scrolling in the Viewer.

  Thank you!

• Photosmart C4450 scanner prints with a black line on the right side

  The need to issue to resolve, the RPG scanner with a completely black spot on one side of the page.  When used as a printer everything is OK

  Thank you

  Seth

  * Have you tried to clean the surface of the glass on the printer to ensure there are no particles causing this black line?

  * So, have you tried a hard reset of the printer?  Unplug the unit while on, disconnect the other end of the power cord of the direct plug, wait 30 seconds and plug in the.

  Try to plug in his own taken dedicated as well, because the electrical noise from other products can cause these lines in the analyses.  Also, check the steps in the document is located here.

  Let me know how it goes.

• disorder of the copy or scan, just the shows up as vertical black lines on the page

  I have a HP Envy 120 printer all-in-one.  It prints very well.  But when I saw something to copy, it's just all black vertical lines.  No light in the scan bar.  I had HP replace my printer with a new printer and the same thing happens.  Anyone have any ideas?  I have a laptop with Windows 7.  Have used the printer for 5 or 6 months, but use only a few times a month, so did not notice a problem immediately the Copier.  Spent 4 hours on the phone with technical support who said first the version of the firmware to put up-to-date, but he was able to complete correctly.  He suggested that I had a surge in my wall connection, but that wouldn't make much sense given that I had just plugged the new printer to try and nothing else on this decision was having problems...

  Hi teropt. Reset of the printer and plug it directly into a wall outlet are a very important step to do if you do not have.

  This document covers troubleshooting for "Copies or Scans have vertical strips of black Pages or lines:
  http://support.HP.com/us-en/document/c03733649

• Black lines across the page

  Each page that print includes a greyish black line.  How can I eliminate this line?

  Hi BlueEyedPea,

  Your printer would require an intervention... If you get the patches even a photocopy of his problem with the printer... You can try to clean the cartridge of the printer and see if it solves your problem else, you need to get in touch with your retailer of printer...

  Remove the cartridge and try clean and then align.

  Check out: http://support.dell.com/support/edocs/systems/prn942/en/om/942_om_en.pdf on how to align the cartridge.

  I hope this helps.

• CN460A: ADF print copy with a thin line from top to bottom?

  ADF print copy with a thin line from top to bottom of page.  fine prints from the PC to the printer...

  This was probably caused by a specification on the thin glass used for scanning form the ADF.  See here for more information on cleaning this area to solve printing line when using the ADF.

• FM 11: Black line to the right of the random images

  Background

  I'm under FrameMaker 11.0.1.383. I'm grabbing the screenshots with Snapx Pro X, which open in Photoshop CS6. I annotate the blow and save the file as a .psd, and then import the .psd in a new image in Framemaker. The framework has no fill and no respect.

  The problem

  About half the images appear with a black line on the right side.

  The same exact image imported into InDesign CS6 doesn't have the black line.

  My solution

  Crop the images slightly to hide the line.

  Anyone else seen elsewhere, or have a better solution?

  

  Thank you! Barb

  Barb,

  You can always "save under" PNG of the original PSD in Photoshop to allow future editing.

  Have you tested this option to verify if it is indeed the DSP filter that creates the problem? If you see this black line with another file created from the PSD format, I suspect something in the image file tto begin with.

• Black lines on the right side of the printed document Hp 8600 N911g

  I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

  I am on Windows 7

  Hi peggymay.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

  The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

  Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

  I thank very you much for your time.  Always happy to help.

• All-in-one Officejet 4630: black lines at the copy and acanning

  Hello... I just bought this all-in-one today, and it is printing very well.  The problem is with the copy and scan.  No matter if I place the original on the scanner or the top of the page, the result is the same... sheet is covered with black lines of variable thickness, running up and down the page, while the details of the actual document are barely visible underneath (or colored lines if I select color printing).

  Not an expert tech by any means, so hard to solve this problem.  Have re-installed... rebooted the printer cartridges... try to print with a cartridge installed... nothing work so far.

  Any help or advice is welcome and appreciated!

  Hi @D_Corbs ,

  I see you got black lines during the scanning of the bucket and the ADF. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If the problem persists, please update the firmware of the printer. E-all-in-one printer drivers HP Officejet 4630.

  If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Contact HP.

  Have a wonderful day!
  Thank you.

• How to get rid of the black lines on the printed and scanned documents

  When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

  While I wait for your answer, I'll post the most likely cause:

  Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

  Then see you the white piece of plastic above the glass, which clean really good too.

  If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

• HP office jet 6500 model e709a - when I make a copy I get black lines the length of the copy.

  HP office jet 6500 model e709a - when I make a copy I get black lines the length of the copy.

  Make sure that the printer is plugged into a wall outlet directly and not in a surge protector. This, often, is the reason for lines appearing in the analyses.

  There is also a document containing information on how to address lines in scans/copies located here.

  I hope this helps.

• 6500 a black line on the right side when I copy

  I have printer hp 6500 has only when I copy I have a black line on the full length of right on the paper even when I copy a blank sheet

  Hi danpk,

  I understand that you are having problems when you perform a copy.  I'll take a look at the document below.

  Copy quality

  Let me know how it goes.

• HP Officejet 6500 Wireless-black line down the copied sheet

  With the help of HP Officejet 6500 (E709n). When the automatic document feeder, copying copies resulting dating a (thin) continuous black line from the top of the sheet for any length, to 1 3/8 "from the left edge of the worksheet. Line does not appear when you copy directly from glass. Am not able to determine a way to access a possible source of problem (most likely a dirty friction roller). The original user manuals do not address this problem. Search for a solution. Thank you

  Hello lentill24.

  Please, see this document.

  http://support.HP.com/us-en/document/c01612462

  See you soon!

• document feeder prints a black line down the Middle

  document feeder prints a black line in the middle of the page

  Yes, the warranty is still valid! I bought the extended warranty for the replacement. So I guess I will contact HP for a new printer.

  Thank you very much for your help!

  Ted

• the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

  The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

  Any suggestions to adjust welcome.

  Thank you.

  The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

  Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.