HP Photosmart 7525: HP Photosmart 7525

Similar Questions

• HP Photosmart 7525: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my HP Photosmart 7525 is no longer allow me to save the scans to the computer.  The "Save" button is gray and impossible to be clicked.  He'll copy, print and scan documents, I just can no longer save to my computer.

  When I enter the HP utility > settings > scan settings > scan to the computer, the software scans my system, then gives me an error message that says:

  "Scan of the computer can not be activated.

  The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I completely uninstalled the old driver software (which says that HP should run on any Mac OS after 10.6) and reinstalled the latest drivers that it is compatible for the 10.11 and later.  I always get the same answer.  Printer will print, will copy, will scan, but not save to the computer.

  Yes, I already rebooted one device at a time, and Yes, I disconnected and reconnected all devices in separately.

  What can I try next...?

  Hey there.

  EASY SCAN can be installed, use 1.6.0 - works well with SIERRA.

  Kind regards.

• HP photosmart 7525: hp 7525 unable to connect to web services

  I recently bought an Imac, and now I can't get my hp 7525 to analyze correctly. It says unable to connect to web services. I tried to uninstall wirless and re-login.  Help, please!

  Hello

  My apologies for jumping.

  To add more, the latest firmware MUST be installed to maintain connectivity of the web services.

  Click on the configuration icon and select Tools, then print a printer status report.

  Locate the firmware listed, if it is a value lower than ELM1CN1607AR (see "BOLD" kinds) you will be required to update the firmware.

  Unfortunately, a Mac OS firmware update utility is not currently available, so you must use a Windows PC to update the printer:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

  Once obtained the latest firmware, try to use Web Services again and check for the difference.

  Kind regards

  Shlomi

• HP photosmart AIO 7525; noisy and too long to print

  HP photosmart AIO 7525

  connected to a HP windows 7 64 bit

  It is my printer 2nd in 2 months (same model # from the same store).

  First, I went back to scratches and that I could not solve the problems of alignment.

  This, it is extremely noisy; It takes a minimum of 50 seconds to even begin printing, looks a keurig coffeemaker, and it continues to operate after the print job. Looks like it's lining up or clean the printhead everytime

  Initially, it would not connect to web services; but after 2 hours, I got it to work.
  In printing a page of a web page, the only thing that printed was clearly the company to the top, the page number, address date and files below. All him rest isn't clear (like the rest) and the characters are shredded and not aligned.

  Any help on these questions or I am going back this one too?

  Thank you

  No, it does not.

  the update does not apply to my system

  Win 7 64 bit

  I think I can just return it too

• HP Photosmart 7525: Unable to print from iPhone 5 since the evolution of routers

  iPhone 5

  Printer HP Photosmart 7525

  We bought a new router and when it was installed, I cannot print from my iPhone 5. My phone is set up on the new WiFi router. I guess the signal to the printer is going through the router. I don't really know.

  I need help to know how to enable printing from my iPhone.

  Hello

  AirPrint is based on Hello (multicast), which should be supported by your router.

  Some routers does not support such an and some may need to change the settings of the multicast router work.

  Please let me know your router brand and model to understant better capabilities.

  So, you can try the HP ePrint app and check if that can allow the addition of the printer by its IP address.

  Click on the plus sign while choosing a printer and type its IP address, which can be found by clicking Setup > network > network display the summary on the front of the printer:

  http://support.HP.com/us-en/document/c01616126

  Kind regards

  Shlomi

• Photosmart 7525

  I have a Photosmart news; connected wireless yesterday.  Unable to connect to Web Services.  Followed directions, but on photosmart screen, can not activate Web Services - is not a code; No email address for printer.  I start to activate the automatic update of the screen of the printer, I say 'yes' to the update, then it error.  EPrint is also not enabled - will not let me activate.  I have Wi - Fi and you can print wireless desktop and laptop but not connection to the Web, so I'm not able to get the "freebies"; coupons, works of art, etc., available on this printer.  Error States "error connecting to server - unable to connect to Web Services.  "Confirm access to the Internet and try again or enter a proxy address"-I even tried who "not good."

  Is there maybe something wrong with this new printer and I would come back.  I suck - I bought it for eprint, etc, not a lot of good if I can get to what I want.

  Please help if you can.

  Hi @LaceyNo1,

  Welcome to the Forums of HP's Support.   I see that you get a connection error message when you try to install web services for your printer Photosmart 7525.

  Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post which has measurements, including the screenshots of how to do it. Don't worry that the screenshots are for a Photosmart 7510, the steps are the same.

  Please let me know the results.

• HP Photosmart, 7525 how to print photos from iPad to use the main paper tray.

  I have pictures of troubled impression of the main plate. He continues to try to use the smallest. Photo tray
  I tried selecting the main tray by default and will not work.
  With the help of hp photosmart 7525

  Hello

  If you use AirPrint, the default setting is to use the photo for the photo tray and the main tray for all other printing. AirPrint allows very little flexibility in this regard.

  To increase the flexibility around paper selection and the plateau, you will need to download the HPe-Print application on the app store and use it.

• How to get my photosmart 7525 to print in black and white on a pc

  How can I get the print option on my pc that allows me to choose the color or black and white in Windows?

  Hi ep43,.

  Welcome to the Forums of HP Support! I understand that you want the options to change the color printing in black and white on your HP Photosmart 7525. I would like you to follow the steps below on your computer:

  1. go to your Start Menu

  2. Select devices & Printers

  3. right click on your PS 7525 and select Printing Preferences

  4. click on Advanced Options

  5. in the present case under characteristics of the printer, you will have the option to print in grayscale, black ink only or Off (which would by default for color printing)

  

  I hope this helps!

  Thank you

• USB and wireless printing on PhotoSmart 7525

  We recently purchased a printer all-in-one PhotoSmart HP 7525.  I created the printer via a USB cable to a single computer (the main desktop computer).  The printer works perfectly in this way.

  We also have a wireless network and other devices on the network to use the HP printer.  However, the main desktop computer doesn't have wireless connectivity, it's why I connected the printer with a USB cable.  I don't want to replace Wireless USB connectivity.  I want to add wireless capabilities, so we have two options available (USB only for the desktop, wireless for iPhones, ipads and other computers on the wireless local area network).  Furthermore, I realize that we need to install the printer drivers on any PC without wire that we want to have access to the PhotoSmart printer.

  What I want to do is to leave the main computer set up exactly as it is (USB connection).  I want to put the printer on the wireless network without disturbing this set-up.  What is the best way to add this printer to our network on the main computer wireless capability wireless?

  Thanks a lot for your help.

  In fact for the specific printer you can do it from the Panel as well.

  Follow these steps to connect the printer to the new network by using the Wireless Setup Wizard.

• HP Photosmart 7525: Scan feature installation and configuration on HP Photosmart 7525

  How can I install / set up the scan on the HP Photosmart 7525 function.  I never connected when I bought the printer?

  Hi clipper91,

  Thank you for your answer!

  To find out if you have the full feature software and drivers installed, go to Macintosh HD/Applications/Hewlett-Packard, and then double-click the HP Scan icon. If there is not an HP Scan icon, then the software has not been installed.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Photosmart 7525: HP7525 is no longer judge Wi - Fi network

  My HP Photosmart 7525 can't find a wi - fi network to connect to.   It scans for a long time and then asks the SSID.   The router is 10 feet and a router to Comcast brand new.

  I disabled the 5.0 mhz signal in the case which was the origin of the problem, but the right HP printer scans and scans with no network not showing.

  Is this a defective printer?

  The problem lies in a new router to Comcast.
  
  The default setting is for g and n protocols. The router offers another selection, which included the older b setting. The moment I changed the router documents began to print.

• HP Photosmart 7525: How to check the version of the firmware of the HP PhotoSmart 7525 is up-to-date?

  How to check the version of the firmware of the HP Photosmart 7525 is up-to-date? And where can I go to download the latest firmware?

  Hello

  Follow these steps to check the update of firmware for your printer:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/document/c03312867/

  Note: the printer must be connected to your network to check the updates, if it is connected with a USB key follow the steps in the tehse to connect the * beep * to your wireless network:

  1. In the wireless menu, tap Settings.

• Scanner sends a pc HP photosmart 7525

  I have received and downloaded the updates today for my photosmart 7525 and now I can't scan to my pc. Nor can I use the auto feed scanner on top of my printer.

  Thank you

  I already studied and solved this problem.

• Printer HP Photosmart 7525 Wizard is not found

  I need help to find my HP Photosmart e - all in a Wizard of the printer.  I want her to be as an icon on my desktop.  (Like Solution HP) used to do.

  I want to scan multiple images at once/harvest/and save each to a different file.

  Help

  emgerald

  Emgerald,

  Welcome to the HP Forum.

  Please keep with steps you have already done...

  First you must have installed full feature software.

  General instructions to install the printer software

  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  ·         Open e-all-in-one printer, HP Photosmart 7525 drivers

  ·         Enter your operating system from the menu drop-down

  ·         Click NEXT and scroll down

  ·         Find the category driver - software product installation

  ·         Select the base driver, e-print, or a full features software

  ·         Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  Next:

  • If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·          On the bottom half of the main Web page for your printer, you can find some helpful videos to help with the installation of the printer software.

  ·          Scroll down the list of videos back until you find the video that best fits your situation.

  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.
  • Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated

  There is valuable information about the Web site, including manuals, pages, solving problems, and SOLUTIONS to problems, How-to's and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Setup software printer should provide an icon Printer Wizard on your desktop that you can use to "scan a Photo Document or".

  Shortcut:

  If the printer icon Wizard is not placed on the desktop during installation, then you can search for the program Assistant printer on your computer.

  Assuming that the printing software full feature software properly installed, you just find the program you can make your own shortcut to the printer for your Office Assistant.

  The following CAN help...

  • Open a Windows Explorer window
  • Go to C:\Program Files *
  • You might find a folder named for your printing software (photosmart 7525)
  • Navigate to the Bin subfolder
  • Search for a program called OR similar
  • NOTE: The program will NOT be appointed Assistant printer
  • Right click on this program > select send to desktop to make a shortcut

  ** Windows 7 may be different - look in C:\Program Files (x 86) \HP if you must, although I suspect the only program you will find there the scanner program...

  ============================================================================

  Multiple scan / crop to save a characteristic single file:

  There are two ways to end up with what you want, even if I have not found a way to get the 7520 (very similar to your model) to do what I think you are looking for.

  I agree that it is useful to have.   If we have zillions of old photos to scan, need to scan a photo at a time - or their cropping manually - can make your brain freeze.

  If the feature is available on your model, the magic is in the analysis in the Assistant printer model - and relaxation is perhaps not too much harder that separate the pictures far enough part to trigger the sensor reads what is on the glass.  It's been a while since I've done this - but I'm sure it was pretty straightforward (from the point of view of the user).

  Click on the thumbs-up Kudos to say 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Photosmart 7525: photosmart 7525 photo tray - how to get the photo tray to use instead of the main tray

  I use a computer from Dell using Windows 8.1 desktop 64-bit.  Printer is HP Photosmart all-in-one 7525.  The software is Microsoft Picture Manager.   I want to print a photo .jpg of MS Picture Manager for paper photo 4 x 6 I have loaded in the photo printer paper tray.  The problem is that printing is still trying to main paper tray in the printer.  Remove all paper from the main tray just causes the print operation to not to say that the main paper tray is in the paper.    If the main tray contains plain paper, the photo printed on this paper.  I have the printer set up to use the photo tray.  I select HP 4 x 6 paper in MS Picture Manager and also set Picture Manager to the highest print quality.  But no mater what I tried, the printer selects tray to main paper rather than the smaller photo paper tray.  The printed image is 4 x 6, but it is printing on paper of the main plate.  What I am doing wrong?

  Well - I found that among the pop ups related print had a link 'options' that seems to indicate that it could be me trying to change things which were not suitable for my printer - so I didn't click the link.  So this time I didn't click the link and he showed me up - again - to set the s/w to use the photo tray.  So I did and the photo made print from the photo rather than the main tray tray.  So now I know how to do and don't need to mess with trinkets or all other signs, you've shown me.  Thank you for taking the time to try to help me.  I appreciate your help.  CR