Keyboard and beep on startup with Satellite A80 problem

Similar Questions

• Satellite A80: Problem with Toshiba command buttons

  Hello, I ve had a Satellite A80 whith buttons for play, stop, rewind and move in the pre-installed software: windows media player and Intervideo windvd 5. But I ve desinstalled intervideo 5 (I have did´t way to do it) and installed a version update 7 Intervideo

  Anyone know how I can continue to use this button with the new software of Intervideo 7.

  In the control of Toshiba program is not allowed to anable another video software.

  Thank you very much and excuse my englih

  Hello

  Have you checked the settings in the properties of the Toshiba control?
  There are two tabs. Please check if the option control of DVD video in the section select drive under the multimedia applications tabs is selected.
  Here, you have to choose WinDVD.

  Good bye

• Connectivity issues and touchpad Wi - Fi with Satellite L650 on Win8

  Hello
  I recently updated my Satellite L650 - 18 c (short part no: PSK1JE) to Windows Pro 8, thanks to a commercial copy. The laptop works very well and I am happy with the new OS, but I have a few problems.

  1 - Touchpad
  During my first installation of Windows the touchpad used generic drivers, then I went [here | http://pt.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=PT] to download the proper drivers. I couldn't find the drivers of Windows 8, so I went to the Web of Synaptics site to get the drivers directly from there. I got Windows 7 drivers.
  When I try to open the settings for the touchpad in Windows I get an error that looks something like "Unable to connect to the Synaptics pointing device" and I have to reinstall the drivers.

  2 - wireless
  I high speeds (~70Mbit/s) with an Ethernet cable, but Wi - fi, I only have 3.5Mbit / s.
  I read that this is related to the drivers, so I looked up the proper drivers, but so far found no one who even settle (I click Yes on UAC and then nothing happens).

  I really want to avoid going back to Windows 7.
  Is there something I can do?
  Any help would be much appreciated.

  As a first step, you should check if your laptop is supported for Win8 or not. Do it on
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/checkWindows8Compatible.do?service=EU

  If this isn't the case, then you can try to use the drivers for the recent but similar laptop models.

  WLAN I checked the specifications of the laptop and your laptop has WIFI and Bluetooth combo card. It is Wifi b/g/n 11 + BT V2.1 + EDR (Broadcom BCM94313). Unfortunately the Toshiba WLAN portal you won't find Win8 drivers at the moment.

• All other users MBP affected by keyboard and trackpad breaks/stands with El Capitan?

  Other users MBP know breaks & entry lost with the built-in keyboard & trackpad since the upgrade to El Capitan? At least once every 90 seconds, the pointer freezes and stops the keyboard entry. Activity log report the errors that the device is not ready (see below). What happens on a Virgin installation on a hard drive reformatted with the installation of third-party software. I restored the system to Yosemite and the problem disappeared. Then a second, new installation and problem reports. It still occurs in the OS installer indicating this is an extension of the kernel or driver bug Apple. At the start of external drive and Yosemite from there is no problem so I am confident, that it is not defective hardware

  This problem is specific to all versions of El Capitan.

  19/01/16 6:32:04.000 PM kernel [0]: USBF: 1409.535 IOUSBHIDDriver (AppleUSBMultitouchDriverNoShim): RearmInterruptRead return 0xe00002d8 error (the device is not ready), not to issue any bed to device

  19/01/16 6:34:46.000 PM kernel [0]: USBF: 1571.674 IOUSBHIDDriver (AppleUSBTCKeyboard): RearmInterruptRead return 0xe00002d8 error (the device is not ready), not to issue any bed to device

  Workaround is to use a Magic Trackpad and keyboard USB.

  I have the same problem with MacBookPro4, 1 and 4 GB of RAM, OS X El Capitan (10.11.3)

  Have you found a solution?

• Satellite A80 - problem of product recovery

  Hello world!

  I have my Satellite A80-144 for almost 4 years now, but now my baby seems to be not more happy and were on strike. I have used my product recovery DVD-rom in the hope of bringing back the good old days No go!

  What are the lost areas warning or error partitions defined and all that blah, blah, blah, which doesn't help me a lot without YOUR professional opinion.

  Following all the instructions on the screen during the recovery procedure did not help. What should do? The hard drive is formatted now, but it does not start. Always a mistake.

  Help, please! Thank you very much!

  Hello

  > What are the lost areas warning or error partitions defined and all that blah, blah, blah,.
  According to the statement, a HARD disk failure is possible.
  You receive a message about lost areas and damaged partitions and in my opinion, this is displayed because the HARD drive is not ok.
  If you can try to format the HARD drive, but that won't help I recommend to replace the HARD drive

  Welcome them

• Keyboard and BIOS update issue on Satellite L505-13V

  Hello, I have two problems with my laptop.

  First is related to the keyboard. It started a few days ago, the laptop has wound down due to low battery, when I turned on it again once, I received a bad operation of the keyboard.
  The main problem is that when I type for ex 4, it appears on-screen as r4, and so on for some other keys.
  I ' v wanted by web it may possibly be due to the BIOS. And decided to update to the current version.

  And here's the second problem:
  I downloaded the update to the bios from the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Could someone please help with questions?

  Hello

  > I got a malfunction of the keyboard.
  What message did you receive exactly? This message based on Windows or what exactly?
  Of course, it could be a malfunction of the keyboard but software as well. Way simpler to check this must connect an external keyboard.

  > I downloaded the update to the bios of the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Where did you download this patch exactly? This update specifically for Satellite L500-13V and PSLJ0E model series?

• A few different questions with Satellite A80 116

  Hello

  I'm having strange problems with my recently bought A80 - 116. I bought this computer in Germany a month ago, and problems seem to be showed up quickly after I received it.
  1. when the computer begins to start suddenly just for some reason, the hard drive light flashes and in light of the end, just burn for a long time. The system also is not responding to Ctrl-Alt-Delete. Then I push the power button for a long time, turn off the system. After this system tries to start almost in the same way, but Toshiba welcome screen disappeared and then spring Marvell Yukon bios messages that say that certain errors occur, and I need to check the cable.
  2. when I turned off quick boot in the BIOS, messages about control memory appeared, and stopped just before messages about hard drive found. Message on the hard drive is sometimes present, after starting this system.
  Often, this problem appeared when recharging from a State of hibernation system.
  3. the system often does not recharge after sleep. It seems that the system is hang-ups or blue screen.

  My suggestions were that the problem may be in the old BIOS 1.50, but I upgraded to 1.70 and steel of problem persists.
  Another suggestion is that some problems may be in drive hard or network card.
  I'm waiting for practical assistance.

  Thank you
  SergK.

  Hi Sergey

  I think you have a problem with your hard drive and you should contact the service.

  The errors you get from Marvell Yukon - which is the network card - is just the information that the PC has attempted to boot from LAN, but he can't do it because maybe the most basic check - the one that a netcable is connected - failed. Don't think too much about now because it is not very related to your problem more that it shows that the PC has try devices more bootable can indicate hard disk problems.

  I spend more time trying to locate the problem, everything you describe was told there is an intermittent problem with the hard drive.

  Good luck

  Tom

• Beep high permanently with Satellite C850

  Hello!

  I bought a new C850 Satellite two weeks ago. Recently, he began with a horrible high beep that keeps beeping constantly.
  It is not my speakers because I disabled the...
  How can I stop this beep?

  Thank you
  Left
  The Netherlands

  Have you done all that can be responsible for this?
  You can enter the BIOS settings?

  When you start your laptop what is happening exactly?

• White screen and beeps when turn on Satellite 3000 X 11

  Can anyone help? A couple of times in recent weeks my Satellite 3000 X 11 itself has turned off. However, it then displays a white screen when I turn it on and 3 beeps followed by 3 beeps of x x. The power led & battery lights on and the hard drive flashes once - fan does not work - it happened to someone else? Or can someone suggust cause and remedy? Thank you
  Tim

  HI Edward,.

  Beep codes are indications that the unit doesn't have his POST processing. The exact cause can only be diagnosed by a qualified Toshiba service agent.

  In regards to your hard drive, will find it this located below your optical drive that must be removed first. Remove the screw (F5) the appliance and slide the optical drive before that. You will then be able to access the hard disk.

  Kind regards

• Cann't find my WLAN with Satellite A80-144

  Hello

  I can't find my WiFi with my new laptop A80. It find´s only the wlan of the houses on the right an left me! a firewall, I don't have any security settings in my wlan!

  My rooter comes from the telecom in Germany T-Sinus 154 DSL SE Basic

  who can help me?

  welcome them

  Hi Udo,

  You say you can see the other local wireless networks in your environment. In this case, your machine working properly. In my opinion your rooter poss褥 evil. You should check the settings of your router or contact the Germany telecom for more special training.

  Good bye

• Recovery with Satellite L300 problem

  I have a problem trying to restore my laptop Toshiba Satellite L300 to factory settings back!

  OK so basically, my laptop Toshiba Satellite screwed up and I even turn the thing!
  After a while, I was able to 'Restore factory settings' and then after typing my name and my Pc name etc., and after the latter had analyzed what it scans, it says "step 2: finish Prcoess Installation may take several minutes.» Do not interrupt or stop ' or or whatever it says...

  Anyway, I don't know, but it seems to be stuck on this screen! I left it for like 30/40 minutes and it always did, so I turned it off by the button. Now when I turn it on, I can't do anything until there finishes this installation, but when I try to leave it, it doesn't do anything!

  Help, please!

  Additional details
  I don't have a recovery disc! I restore or retrieve or another of the original on the HARD drive when you press F8 at startup to the top

  Any help appreciated

  Thank you, Andy

  Post edited by: ADMIN

  Hello Andy

  Unfortunately there is not some sort of magic bullet. A recovery facility works or not and there is no way to make it work somehow.

  What you can do is to start the installation of recovery even once, if possible. Please do so and send feedback.

  To be honest I don t understand why you didn't create Toshiba Recovery DVD s advice. If something goes wrong with the HARD drive or HARD drive recovery image can not be used you will be able to use recovery DVD for installing the OS.

• Power supply with Satellite M30x problem

  When I connect my Satellite M30X in power, he sometimes shows the power light and the battery light. It can then be turned on and will start and run.
  Most of the time the power light blinks and the battery light stay out: it will not illuminate.

  When it turns on, it will work for a period of a minute or two till about 4 hours and stops randomly.
  Now the led starts flashing and continues to Flash while it is powered.

  There must be some problem with electronic control gear. Strange is that this problem occurs from time to time.
  Sorry, but if you want to get rid of it you must contact Toshiba service and let check your laptop.

  To be honest, it can happen that
  Entire motherboard must be exchanged, and it can be quite expensive. Might be time for the new laptop computer. Satellite M30 is really old.

  What do you think of all this?

• Audio driver with Satellite A200 problems

  I installed XP + SP2 on a Satellite A200 successfully. I have downloaded all the drivers from the official site, but even though I installed the drivers for the sound card, the system does not recognize a sound card, no indication of speakers to the taskbar. Also, I installed the driver for the modem, but under the control panel modems, there isn't any modem.

  Hello

  I also had this problem on my Satellite A210.
  The problem was that I didn t install two important patches from Microsoft. * KB888111 and KB835221 *.

  This patch must be installed before installing the audio driver.
  If you have already installed the audio driver please remove TI (remove the soundcard from Device Manager).

  Then, install the patches mentioned and after reboot short you could follow with Realtek sound driver installation.

  This helped me and I'm sure he will also help you 100%.

  Goodbye & good luck

• My Firefox opens on a completely white screen with no menu bar or whatever it is. I uninstalled and reinstalled several times with the same problem. Help!

  I opened this morning with no problems, went to my g-mail account, pulled upwards an e-mail, click on answer, typed my respons, but when I hit send, everything went completely empty.

  I have not compressed, without... menu bars anything other than firefox upper-left logo and reduce it, full-screen/small screen and close / x buttons in the upper left corner... it's she.

  I uninstalled and reinstalled several times, but nothing works.

  What now?

  COR - el,

  Wow... that was well above my head... at least tonight. Laughing out loud

  After my last post, I did a little research and figured out how to import my favorites in IE8... so I uninstalled firefox again... but this time I had checked the "delete my personal Firefox and customizations" in the wizard, who did remove two addons (Ghosery and Ad Block Plus)... the relocation was different this time and the first time you start firefox He asked if I wanted to import my IE Favorites, which I did... I now added Ghosery and Ad Block... and if so far everything goes well... seems I got this back up and running.

  The mention of the malware in a madperson add-on has been helpful to my solve my problem.

  Thanks for the help...

• Digital camera with Satellite L30 problems

  Recently bought a Pentax digital camera.

  When I try to view pictures taken with a camera on my L30, a message appears "locate and install driver software.
  I click Yes, another message appears - insert disc that came with your Pentax camera, what I'm doing.
  Finally another message - cannot install Pentax Optio M40, Windows is not found software driver for your device. I visited the Pentax site and contacted them and they told me that if I (preloaded) OEM of Windows I have to contact my computer manufacturer because the OEM versions are adapted to the computer on which it is installed.

  Where is can this question - anyone help?

  I'm really confused and I have to say that Johnny is quite right. Part 3 producers of software must adapt own software for the most used operating system. Hardware manufacturer has nothing to do with these programs.