Unable to connect after you change a new router and created a homegroup

Similar Questions

• What to do when the subscription is unable to process after you enter the serial number and ID adobe

  What to do when the subscription is unable to process after you enter the serial number and ID adobe

  Contact support by phone / chat / web form.

  Mylenium

• Wireless connectivity after you install a new LAN modem.

  Installed new DSL modem/wireless router. Using WPA2-AES security for the wireless. All new wl in my local network components reacted very well. 2 units of wl, Sony VAIO TR3 and netbook Acer Aspire One, does not connect to the network. Both use XP svc pk 3. Pswd screen Sony allows WPA2-AES and I entered the pswd. The netbook has entry field for WPA-TKIP. I enter the password anyway. Neither connects via WIFI (both connect via ethernet very well).  Vietnamese to the new modem/router installation, both of these units connected to the local network very well. The previous security with the router was WPA-TKIP. Any ideas?

  Hello

  Different wireless routers treat differently security. Many cannot deal with double level of encryption.

  First of all the stage newspaper with a wire to the router and disable security.

  Make it work temporarily with open connection.

  Spend on wireless security, then to use the WPA - PSK or TKIP - which is in the router to two computers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• connection - after moving to a new location and a new Internet service provider

  I'm moving to a new location and get a new ISP .What can I do to connect again with Skype?

  MOD edit: [title to be more descriptive]

  Just the usual start Skype, Skype will work as long as you're connected to the Internet and your ISP is not blocking Skype traffic (usually not, but some country).

• Unable to connect to the Internet via the router and Modem

  I've recently updated my version of office xp to windows 7. I have a D-link router and a modem with an ISP, and they are all correct, the son. I tried to install the router, but it cannot detect an ethernet cable, even if everything is good. I shot all three offshore, the computer, the modem and router for 60 seconds, reset the router and tried to configure a connection through windows, but nothing seems to work. I have a laptop that can capture the wireless signal and connect to the internet through this. But it's the computer that cannot find the modem or router and does not connect to the internet, I am lost on what to do.

  If your laptop is connected through the router (wireless), then your router is
  more or less OK.
   
  Go to Control Panel/network connections.
  If your PC has both wireless and LAN cards, turn off your PC wireless
  network, here's how:
   
  Right-click on the icon of your PC's wireless network connection. Select Disable. Wait
  until the end of this process.
  Then, right click on icon to connect to the LAN of your PC. Select Disable. Wait
  until the end of this process.
  Now right click on icon to connect to the LAN of your PC. Select Enable. Wait
  until the end of this process.
   
  Open a command window (cmd.exe). We will see if there is a LAN connection. On
  the command line type:
   
  Ping 67.195.160.76
   
  then 'Enter '. What answer did you (paste here). If you receive the answer
  pings, enter this next...
   
  Ping www.yahoo.com
   
  then 'Enter '. What answer did you (paste here). If you receive the answer
  pings, open your browser and go to www.yahoo.com. What is going on?
   
  Other things to check...
  You have DHCP enabled in your router configuration (preferred answer: Yes)
  Set the maximum number of DHCP users to 10 or more (you can reduce that
  later if you prefer).
  Is set to "obtain an IP address automatically" the IP address of your PC
  (preference response: Yes, unless you know what you are doing) or is it
  already a value in place.
   
  "staz2020" wrote in message news: a707c004-e504-4f14-b1d4-2bc465c15eb3...
  > I have recently updated my version of office xp to windows 7. I have a
  > D-link router and have a modem with an ISP, and they are all correct, the
  > son. I tried to install the router, but it cannot detect an ethernet
  > cable, even if everything is good. I have disabled all three, the
  > computer, modem router for 60 seconds, reset the router and tried
  > establishing a connection through windows, but nothing seems to work.
  > I have a laptop that can capture the wireless signal and connect to the
  > internet through this. But it's the computer that cannot find the router or
  > modem and does not connect to the internet, I am lost on what to do.
  >
   
   

• new router and can not connect wireless

  Installed a new router that has changed my a WEP to a WPA2 security. I connected to the printer (7410) via ethernet cable and changed the security settings, but the printer will not connect to my router. I'm printing directly connected ethernet cable on the router. When I try to use the interface of the printer to cinnect to the router the only option that appears is WEP.

  Any ideas?

  Thanks it worked perfectly for me!  Sorry, your options appear on the screen for you, but they did it for me.

  Just make sure you change your new router wireless to the first WAP and it should work fine.  No need to reinstall any software or drivers as some previous posts said.

  Go to: network, Wireless Setup Assistant, (I had to scroll down to the second page to find where to enter my new network name) and enter the new network name configured on the router.  I changed my network name of the WAP2 name that I had originally put in place, so it was easier to distinguish that one has on the WAP.  Enter your WAP password and you should be good to go.

  I use a wireless router Netgear on a Windows XP operating system.

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• Can I change the new memory and at the same time to replace the Rams?

  Can I change the new memory and at the same time to replace the Rams?

  If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

  Please do "about this Mac" in your Apple menu to get this:

  

  Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

  With the exact submodel we can better advise you of any available upgrade paths.

• After you install PC Health Advisor and running the software all fonts are gibberish.

  System Restore did not work on my laptop.  After you install PC Health Advisor and current execution, all my fonts are gibberish.  I can't do a system restore, and I can't read the fonts to be able to use the laptop.  Any suggestions apart from running the system recovery to restore to their original factory condition?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I connect my f4500 to my new router

  I, ve just installed a new router and can't seem to get my work f4500 printer doesn't work on windows xp

  Hello

  Run the installation CD, and then follow the opportunity to reconfigure the network connection.

  When prompted, temporarily connect the USB.

  If you no longer have the CD, you can download the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-2&cc=us&DLC=en&LC=en&OS=228&product=3944758&sw_lang=

  Kind regards

  Shlomi