HP Photosmart C3190 installed on XP PC. I need the center of HP solutions.

Similar Questions

• Solution Center cannot be found. Install from a valid copy of the installation package

  Original title: "Solution Center"

  I'm having a problem with the Solution Center, and this window pop up on the screen says it is impossible to find and install from a valid copy of the installion package. I have not all copies of the operating system. The computer came loaded with all that.

  What can I do?

  It is built into the operating system. There is no separate download or the available installation option.  I suggest that you contact the manufacturer of the computer for a set of recovery disc (for a small fee) and with those, you should be able to re - install Vista back to the center of Solution - or maybe they will sell you a copy cheap real Installation of Vista disc.  Remember using recovery discs is as a new installation, so you need to back up everything that you want to save (your data at least) that the process will wipe the drive clean of everything.  An image backup will not help as it will scan the newly installed Solution Center when it restores.  You may be able to make your own disks if you have a recovery Partition - ask the manufacturer to this topic too and how to do it if possible.

  Another option is to borrow a disk for Installation of Vista genuine in the same size of the bit and use it to make a repair/update that will preserve your data, programs and settings (a MUCH better option if you can borrow a disk from anyone or get a good price from the manufacturer, if they even offer it).  He will know the correct version of the product key.  Then make a copy for yourself 'for next time"because they are not protected against copying.

  You can reach the center of online solutions to the: http://support.microsoft.com/ph/11732#tab0.  It is not exactly the same as installed with Vista, but it doesn't do a good job and can serve your needs if you don't like or are not alternatives.

  Here is the Microsoft policy on the replacement of the software; http://support.Microsoft.com/kb/326246 which is essentially what I said just above (and some additional information).

  I hope this helps.

  Good luck.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Photosmart C6180 all-in-One: after upgrade to Windows 10 my HP Solution Center software does not open. It flashes only.

  After the upgrade to Windows 10 does not open my HP Solution Center software. It flashes only. I tried to uninstall and reinstall the software but the problem continues.

  Hello

  Right-click on the Start button and select programs and features.

  Click View installed upadtes and search for KB3132372.

  Uninstall the specific update, then try running the center of HP solutions again.

  If it works fine, I suggest hiding the specific update for now using this tool:

  https://support.Microsoft.com/en-us/KB/3073930

  Microsoft and Adobe ar to aware of this problem and currnetly investigation.

  Shlomi

• Photosmart D100: Instalation problem

  Hello

  I have a windows 8 (64-bit). I got a Hp Photosmart series of D100 as a gift, so I went on the internet for how to install the necessary software.

  I downloaded the "HP Photosmart full feature and software drivers" and is run with the "HP download and install Assistant".  I clicked on "install" and another window open with 3 options (I will translate from french) install, Readme and quit smoking. I chose to install.

  Another open window called "Hp-photosmart D100 series" with a photo of two Asian, latina, a black one guy an old white man. A cd that runs on the left and a blue arrow point to "a check of the system".

  That is the problem. A window appears and says "the specified file is not localizable.

  The window closes after I press "ok" and the previous changes of windows and display the message "process shrink" and closes, so I'm new to the "HP download and install wizard".

  Thanks for any help, I've been on this during more than an hour and I'm really thinking about buying a new printer

  Hello there @fb_hp_user ,

  Welcome to the Forums! I hope you enjoy your experience

  I noticed your messages on the error 'the specified file not found' message you see when you try to install your printer on Windows 8.1. I'm going to share with you a few suggestions.

  1 make sure that the Internet Explorer pop-up blockers are turned off before downloading the installer

  Blocker Internet Explorer: How can I disable Blocker?

  • Try to install

  2. If you are using McAfee secure Live or any other firewall, please temporarily disable the "real-time scanning".

  How to disable real-time scanning

  • Try to install it

  3. go to the start screen (you can also press windows + R to open the Run dialog box) and type %windir% should display the windows folder.
  
  Click on the folder and scroll until you see the files. Search for a class named 'HPWINS *.» DAT"(le * est un nombre qui varie) remove this file and retry the installation."

  • Try to install it

  I hope that my post was helpful, thank you for posting!

  

• Pavilion TouchSmart touch stopped working after HP Photosmart printer installed

  I bought a HP Paviliion TouchSmart 23 - h056 all-in-one new and the touch screen worked flawlessly.  I then installed a 7520 of HP Photosmart all-in-One printer/scanner/copier and the mouse pointer works on screen, but to the touch on the screen no longer works.  The system came pre-installed with Windows 8.1.  Help, please!

  Hi and thanks a lot for your suggestion and the quick response!  It was the same driver.

  Finally, what has worked, it was that I had tried a reboot, but not completely executed a stop down and pressed the button at the top of the screen to turn it off.  I then pressed the button to turn it back on, and then worked on the touch screen.

  You are very kind and competent.  Thank you.

• PhotoSmart 3310 instal can't find network printer

  I have a HP Photosmart 3310 that works fine on my XP computer.  When I try to install it on the Windows 7 computer, it installs the drivers, and I can add a new network printer using the IP address.  However the HP All In One install program (AIO_CDB_FSW_Full_Win_WW_130_141) will NOT find the network printer (even with the static IP address).  The HP printer and scanner utilities can find and work (HPPDU & HPSDU).  the HP diangostic untility network works and finds the printer (HPHNDU).

  The problem is that with on Setup search the Photosmart 3310 it won't allow the solution Center HP open and use the scanner.  Can I make a shortcut on the desktop to program scanner?   Where and what is?

  I also tried to plug it into a USB cable and has not received much love from the Setup program.

  The issue of 'Imcomplete Install' returns after a day or two.  Again, this is a brand new computer with a clean installation of windows and Norton, HP, and Government issued smart card software.  Nothing weird.  The other computers in the House are fine.

  I found an alternative solution that works:

  I found a solution to the issue of scanner!  I installed the software VueScan from http://www.hamrick.com/ , the software is designed for high end photo editing, so it's a no-brainer for her to scan documents.  The free version works fine. If I wanted to the cost of the professional version of the $90 is nothing compared to the time I've wasted on getting the HP software to work.

  To resolve the problem of the printer, I installed the driver through windows and bypassed the HP software.  The only thing that miss me is now the ability to fax, but which can be performed directly from the HP Photosmart camera.

• I can't install my HP Photosmart D110 printer. It says I need to install a driver. Any suggestions?

  I can't install my HP Photosmart D110 printer. It says I need to install a driver. Any suggestions?

  The HP Photosmart D110 printer is fully compatible with 32-bit and 64 - bit Windows 7 as indicated by the Windows 7 Compatibility Center on this page , but a free download is required for any operation. Report complete here.

  
  You can get the drivers and software from the HP Support site updates by clicking here. Determine if you have a printer D110a or D110b, then specify if you have Windows 7 32-bit or 64 - bit.

• Photosmart C4580 installed on Windows 7 Ultimate and it won't work!

  Software installed on Windows 7 Ultimate and I can do everything except printing! When I ask for an example, I see a blank page and the printer does not print. All downloaded from the HP site and I'm tired of installing the update (CPE_SLP_NETWORKMSI_hpcom_000_006) because I don't think it's the solution because I tried several times and now I installed a version of Windows for the fourth time and I won't do it again. Can someone please help?

  With the help of HP customer care, I solved the problem! Problem is that the new installation of Microsoft was not correct. I never formatted the disk before the installation of new, and that was the problem. Thanks for the support!

• Photosmart 7520 Intermittent 'USB device' new unrecognized on the new HP PC

  I have a HP Pavilion 23-xxxx all-in-One desktop PC that was bought with a HP Photosmart 7520 in October of this year.  The PC came with Windows 7 Home Premium 64 - bit, which has been upgraded to 64-bit Windows 8 Pro following instructions provided by HP, including the installation of applications and specific drivers of Windows 8.  The computer has never been used with Windows 7, the upgrade was literally out of the box, the end of the first OEM installation.  Installed the printer software, downloaded from HP, which has installed fine.  As a first step, there is no problem with the printer - printing and functions of scanning performed as expected.  Then, after a day or two I started to do a random popup message in Windows saying "USB device not recognized" and something about Windows have stopped the device because it did not work.  The Billboard on the printer displays error and off-line.  If I turn on the printer, it will work again for a while.  Other USB devices connected to the computer - mouse, a keyboard and an external hard drive - continue to work very well.  I tried the printer connected to a different USB port, then changed the cable.  I ran the HP print and Scan doctor who reported that nothing was wrong.  Finally, I uninstalled the printer software and re-installed and everything was going well for a day before the same thing started to happen.  I used the software of the printer and the HP software that is provided for the computer to make sure that both devices are fully patched.

  Much obliged for all the thinking on the issue.

  The printer is probably defective. HP replaced under warranty after hours and weeks of troubleshooting. But to their credit that they replaced it with the more expensive 8600 OfficeJet, which worked without problems since then.

• Photosmart B8550 don't XL ink cartridges require the purchase of a larger car to keep them?

  Photosmart B8550

  Envy, I decided to buy the XL size cartridges because printing photographs uses ink so fast. But looking at the regular size cartridges, installed in the current cage, I don't see how something bigger can fit in there!

  Which brings the question: do I need to buy a XL wagon to keep? And if so, where can I find them for sale, as so far, I have not found their...

  Or... is this just HP does not have regular ink to full capacity, and the difference represented by an XL is simply it is actually full of ink, rather than only partially completed as in the case of a regular ink cartridge?

  Thank you!

  I said cart but meant the "printhead" that holds the ink cartridges.  I also had my answer elsewhere. The standard and XL ink cartridges are the same size, so they both correspond to the same print head.

• After re - install, when I "answer" text of the sender is in plain ASCII text format, regardless of the settings.

  I had trouble with Thunderbird, I so re-installed. (Version 38.2.0) I use TB for years, usually with no problems. But this time, after re - install, when I "answer" text of the sender is in plain ASCII text format, regardless of the settings. And plain text is bright blue!

  I want to preserve the HTML format (usual) of e-mail of the sender when I answer. My settings specify the HTML format.

  I don't want to use TB with this "disability" - help! Thank you!

  I don't see where you checked the compositions and the addressing of adjustment to your account. For all accounts also.

• I installed "downloadhelper". It shows in the list of add-ons/extensions, but it does not appear in the toolbar

  I installed "downloadhelper". It shows in the list of add-ons/extensions, but it does not appear in the toolbar. I reinstalled foxfire, various foxfire files updated, tried other modules, but none of this helps.

  Have you tried to click on "Restore default settings" in the palette to customize?

  Have you checked the settings in the VDH extension?

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• Since its installation in Firefox 20.0.1. There is a box in the center of my screen titled progress install with a bar running below the Green progression.

  Please help this driving me Mad
  Since the installation of Firefox 20.0.1. on my MS Windows 7 Toshiba Laptop there was a box in the center of my screen titled "progress install < with a bar running below green growth."
  Firefox 20.0.1 (FF) works very well and I can drag the box of progress on my screen to my heart's content. Although there no small cross at the top right I can get rid of him by my mouse over the icon (ff), pinned to taskbar program in hover. This gives me a box of progress of installation with small cross, click and his party. That is until I got close and restart (ff) and back it comes in the middle of the screen. I tried to get rid of it through CTRL-ALT-DEL Task Manager, but even once, it reappears on start up (FF) I also stripped (ff) of my machine, once using widows uninstall/change of MS program features and for the second time by using third-party software as soon as I reinstall (ff) new same old problem.
  Thank you
  Cordially Fenfolly

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?

  Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?

  Thank you, but I had to go to safe mode and to the restoration of the PC, but it has been resolved