HP photosmart c4599 all-in-one

I have recently for the 1st time filled my Costco HP ink cartridges and I got the exact same back and put them in my printer. My printer is saying "cartridge incompatible (S). How is this possible and how can I solve this problem?

I'm sorry you have a problem with the ink cartridges.

Re-filled ink cartridges will not always work to these printers. Sometimes, it can, but it may also cause this behavior.

You will need to get new geniune HP cartridge in order to remove this message.

Tags: HP Printers

Similar Questions

  • HP Photosmart C4599 all-in-one: new router so want to put in the SSID code on printer. No screen on the printer to do. How can I do?

    Hello

    I want to print wireless.  I recently changed my router to a 4G one and a new internet provider.   I need to enter the SSID of the router to the printer code so that it can join the wireless network and connect to my MacBook Pro.  Initially when I bought the printer, I was able to connect wireless using a provided HP CD - this does not currently work with Mac OS X 10 El Capitan, even if I have loaded down the HP update drivers.  The printer does not have a screen to change the SSID directly so I guess I have to change sort through my Apple laptop.  I you'd be grateful if someone could help me

    Clonfert

    Greetings @Clonfert,

    Thank you access the Forums from HP Support for extra support! I see that you want to configure the printer on the new wireless network. I will do my best to help you with this problem.

    I have provided a few steps to set up the printer via an ad-hoc connection and then convert it into infrastructure. (your network) Since there is no HP software to run the wireless installation.

    Click the airport near the upper right corner on a Mac.

    Click on the HP printer in the list.

    It takes about 3 minutes to connect.

    Once you get a solid blue light on the printer, it is successfully connected.

    You will not be connected to your network for a bit while we set up the printer on the network.

    Print the configuration page to get the printer IPv4 address.

    Open your web browser, type the IPv4 address for the printer (Safari).

    This will load the Web built-in to the printer server.

    We can now configure the printer on the wireless network.

    Click on the networking, on the left side, click on Wireless, fill out your information for the network. (The network name SSID, set it to the infrastructure, enter your password and the encryption type)

    Apply the settings.

    Now back to the airport closest to the top right corner on a Mac and select the name of your network.

    Just add the network printer on Mac now.

    Click on the Apple.

    Click on System Preferences, click Print and scan icon, then click on the + sign, then select the printer from the list, click Add. (you may need to click the drop-down list to select the printer name to add it in)

    Test the printer.

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

    1 HP Photosmart Premium all-in-One Printer (309 (a)

    2. Windows Vista 64-Bit family

    3. the general printer error 0x61000f6

    4. no change known to printer before developed problem

    0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.

    Let me know if it helps.

  • Photosmart 2610: Photosmart 2610 All In One

    I recently had to reinstall my HP Photosmart 2610 all-in-one.

    I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

    When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

    However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

    Help!   hehehe

    Phil

    Try to reinstall the software, use thislink to dnload the driver full features and software.

  • HP Photosmart 3110 all-in-one: compatibility Windows 10

    I wonder if HP Photosmart 3110 all-in-one printer is compatible with Windows 10?  If yes how to install the driver (I can't find the installation disk)?

    Hello

    A basic set of printing and scanning for your printer driver is available for Windows 10.

    As the link above provided by @banhien seems to be broken, follow this link to install the printer on Windows 10:

    http://support.HP.com/us-en/document/c01796879

    Kind regards

    Shlomi

  • Photosmart 2575 all-in-one

    Hi all

    My Photosmart 2575 all in one printer 'number of copies' is stuck on 8 copies.  I have the number 1 everytime I go to print something. I can't seem to find where to go as she fixed to 1 copy.

    I hope somone out there has an answer.

    Thank you

    Ron

    Hello RBigTuna,

    Welcome to the HP Forums!

    I understand that the printer is stuck on 8 copies and you want to manipulate parameters. Please see page 73 (76/142) of the product manual to modify and adjust the settings. Please let me know the results. Thank you!

    Mario

  • Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

    I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

    I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

    No idea why this is happening and what I can do about it?

    Thanks for your help.

    Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

  • How to install software for hp photosmart c5390 all-in-one on a windows 7...

    How do I install the software for HP Photosmart C5390 all-in-one on a windows 7. I don't have software cd for vista and mac.

    Hi Matt, thanks again for your quick response - which is certainly service 5 stars! Everything works fine now. I just got myself this new laptop - my first HP (Hp Pavilion DV7 6 c 80) and it is excellent, and I'm slowly he get it all set up. I can be naughty and ask you another question? I've (obviously) set up my hotmail on my HP. Do you know how I can remove my files from my old Toshiba Hotmail. I am giving my girlfriend and I want to set up his mail pop3 on it. Whenever I log into windows live mail on the Toshiba, my hotmail more old e-mails coming up on the screen.

    many ways, Ragnar.

  • AirPrint can't find my HP Photosmart D110a all-in-one printer

    I have the iPhone 4 with ios 5.0, and it does not find my printer HP Photosmart D110a all-in-one and an AirPrint-compatible printer. I have everything set up correctly. I have the current firmware on the printer. I feel, keep printing everything wireless, I can print on my printer using the printer email address I put in place. It's just to kill me because I can't get installation to Airprint. I went through all that HP and Apple. Everything I find is for ios 4 and below. Can someone help me?

    It is compatible:

    http://support.Apple.com/kb/ht4356

    http://www.HP.com/SBSO/printing/Mac/Apple-AirPrint.PDF

    I can finally AirPrint. When you sent the message on the router, it reminded me to update the firmware. I've updated to the latest firmware of the router, reset the printer and my iPhone, and it finally showed up.

  • HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

    dose

    All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

    Hello

    Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

    Good luck!

    http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  • Photosmart C5280: Photosmart C5280 All in One

    I have a new HP laptop and want to use my HP Photosmart C5280 printer all in one with her. I need to know what I should do to be able to use my C5280 with my HP laptop. I need to be able to use it with this phone, but there is not anything showing you what who or where you need to download the files, you need to be able to use the new laptop HP Photosmart C5280. My new HP laptop is a Pavilion with Windows 10 64 bit which was already about this when I bought my new laptop. Any help is greatly appreciated...

    Have you been to the HP here web site?

    http://support.HP.com/us-en/product/HP-Photosmart-C5200-all-in-one-printer-series/3204462/model/3204463/drivers

    Everything that you need.

  • HP Photosmart 5520 All in One printer cancels an order of copy of the glass

    HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

    I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

    I used the doctor scanning HP and installed my printer again, but that has not helped.

    RodeDraak

    Hi RodeDraak,

    Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

    You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

    Issues when connected to an uninterruptible power supply/Strip/surge protector power

    In this document, you will see,

    QUESTION:

    Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  • "" HP Photosmart e-all-in-one Pr: "HP Photosmart e-all-in-one printer - D110a installed 10 windows now scanner does not work

    Application of scan works

    Try download and install the driver and test the HP Photosmart Software Suite for your printer at http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-e-All-in-One-Printer-series---D1/4023244/model/4023245

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • failed to install for photosmart b109 all-in-one a - m. has said usb not connected to the computer

    I replaced Vista with a new version of windows 7 64-bit and cannot get my HP Photosmart B109 all-in-one a - m at the end of the installation I downloaded from the HP site. I uninstalled this printer as suggested before attempting the download. He gets to the part where you plug in the power and then the lights on the printer the computer tells me that my USB key is not plugged into it. I tried changing USB website and tested the USB connections and ensure that they work on the computer, but still the same response. The program then continues to stay on the installation of the final software and never complete. Talked with a local tech guy who suggested that you contact because he has no idea.

    Hi, thanks for the suggestion. However, I did not upgrade but remove vista altogether. I found the problem after a lot of grief and research - there was a cord that had fallen on the back of the library that was not plugged in!

Maybe you are looking for