HP Photosmart C4795 to print no

Similar Questions

• Photosmart C4795: No printing on paper of the Document

  This morning, I tried to print a black and white word document and the printer spits out just the white sheet of paper I. I assumed that the ink was out so I replaced both cartridges with new ones. Initially, the small screen on the printer told me that the ink cartridges were either not detected or they have not been installed correctly. I tried taking that regulate them and then put in that hide them and then the printer is no longer detected these issues. When the printer goes to print alignment page, he just spits the blank sheet of paper me with nothing printed on it once again. What should I do?

  Hi @jon12341,

  Thanks for getting back to me.

  Yes, I suggest that you manually clean the cartridges (if they are out of warranty), rather than replace them. If you do not often print, the print head to dry. The print head is on the cartridge, that is why I recommended that you try to manually clean the cartridges.

  I noticed that you mentioned that guaranteed the printer just missed. I believe that this printer is released in 2009, you bought this printer about a year ago?

  To my knowledge, HP does not repair consumer printer products. However, HP can offer you a discount toward a recovery on a replacement unit. Please call HP as best as possible.

  I hope this helps clear up any confusion. Thank you for joining the Forums of HP Support!

• New Pavilion g - Word documents want to print to the HP Photosmart C4795 printer, with or without wire

  LV860UA #ABA Prod

  Windows 7 64 - bit

  No errow message adds the new computer and HP Photosmart C4795 wireless printing. Microsoft Word documents that print, but Excel and Power Point will print. Help

  It's strange. I recommend that you uninstall the software completely. Reinstall the complete and updated software in place the wireless again.

  Best regards
  ERICO

• Photosmart C4795 on fall back on the deployment of Airprint for 2011 schedule?

  Hello:

  I recently bought the printer Photosmart C4795 wireless in September or October 2010. It is not on the deployment schedule of Airprint for 2010 on the PDF on HP support.

  Would you know if The Photosmart C4795 wireless printer will be on a schedule of deployment of Airprint for 2011 or internal parts rely before the deadline of compatibility?

  I want to upgrade this printer to be Airprint compatible.

  Thank you!

  Ziffel

  One of the main requirements for Airprint is the must have ePrint printer.  I do not see the C4795 on ePrint models list, so it will not work with Airprint.

  Another solution is HP iPrint, it allows to print Apple portable devices via a 802.11 wireless connection.

  Here is a link to a document iPrint, it will show you how to get HP iPrint.

  http://support.HP.com/us-en/document/c01616126

• HP Photosmart C4795: remove the printer to computer

  I have a HP Photosmart C4795 who stopped working so I bought another one same model c4795 and my question is that I have to remove the old printer to my computer before I plug in the new? Also I don't have a cd for the new so I can use the old cd? Thanks for any help.

  Hello

  As it is the same model, just go to devices and printers, the existing printer right click and select remove device.

  Onece the device removed, click Start > programs > HP > your printer model and select Add a device.

  Follow the steps on the screen by selecting the link required to set up the new printer.

  Please let me know any questions,

  Shlomi

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• HPZIDR12.dll error message on printer Photosmart C4795

  Try to print on my HP Photosmart C4795 printer.  After turning on the printer, I get an error HPZIDR12.dll.  I'm finally able to print, but the dialog box continues to display.

  Hi AggsterD,

  Sorry, that does not solve the problem.

  Follow these steps to see if we can solve this problem:

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%.

  • Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  • Download the software and choose to save money, save it on the desktop.

  HP Photosmart C4795 printer all-in-one drivers.  Select your printer from the list.

  • After downloading software and extracts, open the temp folder again.
  • Starting with 7z folder (example: 7zS2356)
  • The util folder.
  • The CCC folder.
  • If you have an HP computer, run the L3uninstall.exe. If you have ano HP computer , run the L4uninstall.exe
  • Once the uninstall is complete, reboot the computer.

  Follow these steps to reset the registry settings and options for Windows Installer.

  Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run.

  In the Open box, type msiexec / unregister, and then click OK.

  Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run.

  In the Open box, type msiexec/regserver, and then click OK.

  Run the tool of Accessories\ system disk cleanup. Delete files using Disk Cleanup.

  Download and install the latest version of Adobe flash player. Adobe Flash Player Support Center.

  Restart the computer.

  Download and run the HP printer install wizard for Windows. Find and fix common printer problems using the tools of diagnosis HP for Windows.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the results.

  Thank you.

• Photosmart C4795 prints not (most of the time)

  I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. Installation (with the Vista computer) went well, and all tests and some documents on the XP one and myself. After a few months, he started to give me a "document not found question '. I discovered that I needed to push hard enough to get the book far enough, but not too far. Now (on the XP computer) it says its printing, extracted in the document, then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is a HP Mini 1000, and HP update doesn't change anything.

  I got to work by sending the document again, and then cancel the print job wrong on my computer, and after that it was cancelled on the computer to cancel on the printer. At the point where the paper ejected I placed it on the tray at a time an inch away where I was told in the animations. Then he started on the second print job and worked (he stopped because I only had one page, but took over when I placed the book in the same place and pushed OK.) If the problem was in fact where I place the paper I want animations would show good positioning.

  Yet once again, if anyone needs help or clarification on how I did the job please answer.

• HP Photosmart C4795 did everything BUT copy

  HP Photosmart C4795 - less than 2 months old - worked fine 2 days ago.  Nothing has been installed or changed my mobile during this period.

  Analysis PC - work

  Prints from PC - work (color, p.c.)

  Copy - does not work

  I hit "Copy" on the touch screen

  Then "black copy" or "Color Copy" (any - same result) on touch screen

  And then 'OK '.

  He doesn't it beep at me.  It does not even attempt to copy - is not analyze the element or anything - just does NOTHING.

  The touchscreen works perfectly for the scan to PC - but for copy - it goes through all the steps - and then does NOTHING - just beeps when I hit 'OK '.

  He has worked 2 days - nothing has changed in my network or the laptop.

  I have done a full power cycle - router, computer laptop and printer - 30 minutes off - then turn it back on.  Nothing.

  I reinstalled the driver - NOTHING.

  It comes a day - less than 2 months - decided to do nothing when I hit OK to copy.

  Anyone have any ideas?

  Best Buy told me to ' drop for 2 weeks or more "-I hope I can find a better solution here.

  Thank you.

  Yes - I finally reached someone at HP who knew what they were talking about.  It took 3 cats online different - with different people (I guess).

  Bottom left of the user interface of the printer itself (side) - you see nothing - but there is something there.  Hit this task 4 times (I don't do this to the top) - or keep hitting until it registers 4 times.  It will then go into a factory reset mode.  You will see the words say you this.  You will then have to ride in the original game - choose the language, blah blah blah.

  Then you will need to put your installation disk in your laptop and reconfigure - this isn't a complete reinstallation - there is an option called "reconfigure" or "update configuration" or something like that (I don't remember exactly).

  So, it's a pain - but it worked.

  But the trick is that lower right corner of the user interface of the printer - next to the word 'copy' - it is blank - but if you keep pressing it - at least 4 times - he's going to do a factory reset.

  Basically, it's almost want to do all the steps again (including the wifi connection reset) you did when you took everything first out of the box.

  Let me know if you need additional information.  Someone at HP told me that - through the online chat.  So, if my indications confused - if you go to HP to chat and ask questions about a 'factory reset' - that could get them in the right direction for you.

• HP Photosmart C4795: Hpqdirec is not compatible (Windows 10)

  Recently, I upgraded to Windows 7-64 bit for Windows 10.  Even after the upgrade to Windows 10, my HP Solution Center program has worked well.  Then for some reason (possibly after a Windows 10 update) program is now failing open.  To trouble shoot myself, I uninstalled Hpqdirec and reinstalled again on the HP site, but the problem persists.  Then, I clicked on the HP Solution Center icon and "Troubleshoot compatibility". He came up with the message: "Hpqdirec is incompatible."  My printer is a HP Photosmart C4795. Can you help me?

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Use black ink cartridges into the two slots? HP Photosmart C4795 - no color cc = us

  Can I use black ink cartridges into the two slots? HP Photosmart C4795 - no color, to save money?

  Hey JJ - B,.

  You cannot use a black cartridge in both slots. The print head channels are different for print 3 colors in a slot vs only black print out on each other. Using black in the two slots certaining most will cause errors and possibly damage the printer.

  Is there a reason you want to run the two blacks to be with? You can still print with only the back cartridge installed.

  Good luck!

  Sean

• Photosmart C4795: Center of solutions of downloaded need Photosmart C4795

  Recently, I experienced a problem of dll when printing on my Photosmart C4795 printer.

  I have provided an extremely lengthy and detailed the problem correction, and after following all the steps, he succeeded!  Great!  Here's the bad news: I have the center of Solution and not really needed!

  Help, please!  Thank you!

  Hello

  Please download and reinstall the following software:

  http://ftp.HP.com/pub/softlib/software12/COL28119/MP-71555-4/PS_AIO_06_C4700_USW_Full_Win_WW_140_175-4.exe

  Kind regards.

• HP photosmart C4795 lose internet connection

  I have a HP photosmart C4795 printer. I'm trying to set up wireless. But the issue I'm having is whenever I turn on the printer I lose all access to the internet. I tried to uninstall & reinstall the printer several times, I turned off my internet security and firewalls, I checked my IP addresses for both my Verizon 4 G LTE hotspot and printer. I also hooked up with the cable from the printer without result. I also contacted Verizon and HP.

  It's frustrating when you are chatting with someone for help and lose the connection and must keep to resubmit a question.

  Any help would be greatly apprecited. Thank you.

  The doctor Print & Scan said that there is no problem. I think I understood now. Thanks for the help.

• Photosmart c4795 will pick up paper from tray

  My photosmart c4795 won't not pick up paper from the bin - keeps giving me paper message even if there is paper in the tray.  I already ran clean paper from the utility and nothing has changed.

  Help please!  He has been feeding paper last night!

  I ended up hitting the front of the printer and now it works! For plain paper - I am trying to print business cards now and it feeds late

• Need help with Photosmart C4795 Wireless Connection

  What I have: HP Photosmart C4795

  What I use: Macbook OSX 10.9.5, wireless network with WEP security, running, I'm not sure if I have WPS or not (don't know how to say or use it)

  Problem: I used it as a wireless printer without problem for the past five years.  Recently, I moved and cannot find out how to configure the wireless connection.  USB connection works fine.  I still have the installation software, and as far as I can tell, it is updated (I'm not positive however.)  When I run the HP Installation Wizard, I've got to the point where I select "Set up for wireless" and the HP installation wizard crashes every time.  I scoured the forums and have found conflicting advice about this problem.  Someone please give me a clear answer. is there something I can do to get the job of wireless or no wireless capability is no longer works with Mac OS x 10.8 or superior?

  Ah ha! I thought about it.  For anyone who uses an ATT Uverse router, maybe that's your problem.  My router is a NVG589 of Arris.  I don't know about other routers, but I guess that's the same thing.  These routers are capable of WPS, but their default settings have the WPS is off.

  You have to

  1 access to the properties of your router via a web browser (Safari, Internet Exploere, Firefox, Google Chrome, etc.) to the address http://192.168.1.254/mdc
  "2 click on 'Edit your settings or wireless security'", you will need the code printed at the bottom of your router.
  3. turn on the 'Wireless Protected Setup (WPS)'

  From there, you should be able to follow the Setup instructions for printers WPS enabled found here: http://support.hp.com/us-en/document/c02273853

  This next set of instructions is specifically for anyone who has a Mac and running the version OS x 10.9 or higher.  (If you don't know how to check this, click on the apple icon in the upper left corner of your screen.  Select "About this Mac" a box will appear with the information of OS x).

  Select Mac OS X.

  Select the third option OSX v10.10 Yosemite, Mavericks Xv10.9 OS and OS X v10.9 Mountain Lion.

  Select Option 1: Wireless Installation (EVEN IF YOU ALREADY HAVE IT CONNECTED VIA USB.)

  Skip the second step and proceed directly to step three.

  Select the second method: install the software using Apple software updates

  Follow the instructions for the method of the push button.

  I hope this helps for those who had as many problems as me!