HP Photosmart C5200: need to connect the HP Photosmart C5200 printer to my mac 10.11.4

Similar Questions

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• Creation of the DSN that is needed to connect the 5.1 vCenter to SQL Server

  I'm looking for a simple process, step by step create the DSN that is needed to connect the vCenter Server 5.1 to an already configured SQL database.

  It must be simple, still usable by a person who is not a database administrator.  He should assume no knowledge of database.

  It should be usable on 64 - bit Windows 2008 Server R2 OS when connecting to a SQL Server 2008 R2 database.

  It must include ALL the options I have to configure when configuring the DSN, so that later I can run vCenter Server 5.1 installation and Breeze the by.

  Screenshots would be too great, but if you have a step by step, that would be great.  Some thing that you can go totally illiterate crew of database and they can cross step by step.  Docs from VMware do not give enough details and do not point to a good reference.

  Hello

  Click on Control Panel > administrative tools > Data Sources (ODBC).

  Open ODBC connection, select the system DSN tab, and then click Add

  Select SQL native client, click on finish

  He will ask DSN name, enter the name you want for VC DSN.

  Then enter the address database of VC.

  Then it will ask for authentication, select which option of your choice, as based on windows or SQL based authentication.

  Then click Next and select the correct database that has been created for VC in drop-down option

  Finishing and test the connection.

  Concerning

  Mohammed

• Need to connect the network adapter when the ethernet cable is not connected

  Hi all and thanks for reading.  I'm new to the both VMWare Fusion and new on Mac.  I have a new MacBook Pro, I bought a month ago.

  I have software that works only on PC and its license server is linked to the mac address of the NETWORK card.  I am implemented on bridged network mode I use the multiplicity to link the Virtual PC to my other PC and it seems the network mode that works best for this.

  I've set up to work with the virtual address of the NIC card and everything works fine.  The problem comes when I'm traveling and my Mac isn't difficult, connected to an ethernet connection.  When I start the merger, told me that 'the network bridge on/dev/vmnet0 unit does not work"and that she didn't connect the device virtual ethernet0.  Under the terms of the merger, I get this error whenever I try to force the card /virtual machine/network/will connect the network adapter.

  When I'm traveling or not hung, I need to get the virtual running NETWORK card so my license server will take place so that I can run my software.  Any ideas?  Any help is most appreciated!

  Thank you

  Mark

  Change the type of the bridged network to NAT and then start the virtual machine.

• I need to connect the second HDD in Satellite A300-14V

  Hello!

  I'm using A300-14V and now I need to install the second HARD drive. But 2.5 hard drives have different heights from 9.5 mm to 12.5 mm including a right for my Satellite A300? And I'll need to also buy a slide.

  Could someone please clarify that she is and give me the part number?
  Thank you.

  Hello

  Did you check if your laptop is able to manage the second HDD?
  I mean there is a second HARD-drive Bay, but have you checked if there is a connector needed?

  You should check this first before you buy hard drives

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• need to download the driver for my printer

  I have windows 8 on my new computer and I have a lexmark 5470 printer how to download the driver for this printer

  I am sure that you will not find the driver for printer Lexmark here. I would recommend that you try the site Web of Lexmark.com.

  Best regards

  ERICO

• 6B55DX dv7: what cabling needed to connect the second HD

  I would like to add a 2nd hard drive, but although there is an empty Bay, there is no wiring.  My questions:

  1. What are the numbers of the part for the wiring needed?
  2. Are there other necessary parts such as clamps, cages, etc. ?
  3. Where can I get these parts?
  4. Is there anything else I need to know on the subject of bringing the HD after installation?

  I intend using the extra drive for extra storage; I won't start him.

  This is the cable you need:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=379

  The dv7-6000 series was supposed to be supplied with the box hard drive, but no cable or screw. If you do not have the caddy (also called sled or cage) then you will need to find one of those too

  http://www.eBay.com/ITM/665597-001-genuine-original-HP-hard-drive-caddy-second-dv7-6c-series-/291671518946?hash=item43e8fa2ee2:g:dkAAAOSwGotWqUHQ

  You do this right. A hard drive in secondary Bay can be initiated, but makes a great place for additional storage capacity.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• need to adjust the paper after each print

  I have that 7520 printer all in one for 2 months (new)

  After each impression I have to adjust the paper otherwise, I get the message: no paper

  Make sure your paper guides are tight against the edges of the paper, while paper is loaded in the tray.  There should be little nicks in the status bar to help you confirm that the guides are engaged in the correct position.

  Otherwise if you are referring to the feeder manual adjustment can be the best thing you can do.  AutoDocFeeders are normally not snap and often need to be messed with on many models of printer.  Sometimes a small building of habbit can solve a problem like this.  If this isn't the case, you can try to contact HP support since it is such a new printer.  However, unless you can prove there is a mechanical fault on the tray or feeder, it probably isn't something they can do.

  You don't have something with the message No paper well.  Same as if the guides are disabled the printer should recognize there's paper in a way or another.  Questions guide paper normally takes place at the inadequacy of the size rather than no paper error.

• I need to change the region on my printer

  This printer was bought in Cyprus with cartridge number 655 installed.

  I need to install cartridges no 364 haven't bought from the United Kingdom.

  They fit very well, but I get a message that they are incompatible

  This is why I need the printer changing region.

  HP Deskjet 5520 series

  Model no CZ282C

  Series no [personal information]

  This should not be a problem if you use the browser Google Chrome built in the translator, as seen in the picture.

  

• Need to calibrate the new monitors before printing/editing in LR?

  Hello!  Do I need to calibrate my new monitor before doing all my editing and possible printing?  I just got this computer, so I don't know if it is already calibrated, at least for the first month.  Of course, I don't know how long it sat in the warehouse, but at least I know it is new and has never been used.

  Thank you!

  Anne

  Now you can make it!

  Why are my prints too dark?

  A video update of a piece written on the subject as soon as 2013

  In this 24 minute video, I'll cover:

  Your impressions are really too dark?

  Calibration of the screen and WYSIWYG

  Viewing print conditions

  In case of problems to get a match

  Avoiding the hacks who do not resolve the problem

  High resolution: http://digitaldog.net/files/Why_are_my_prints_too_dark.mp4

  Low resolution: https://youtu.be/iS6sjZmxjY4

• Printer model DesignJet T1500: need date of the lifecycle for DesignJet printer T1500 - model CR356A

  Please indicate the date of the life cycle (or end of Support) for DesignJet printer T1500 - model CR356A

  Hello

  You can contact HP for the info.

  Best regards

  Mike G

• I need to install the drivers for my printer HP laser jet mfp 1536dnf

  I just bought a HP laserJet 1536dnf mfp printer and can't find the drivers, could you help me get it someone please with that?

  [Moved from comments]

  The game, 27 Sep 2012 23:29:37 + 0000, LornaWandio wrote:

  I just bought a HP laserJet 1536dnf mfp printer and can't find the drivers, could you help me get it someone please with that?

  Where did you look? You should look on the HP website.

  Ken Blake, Microsoft MVP

• Need to share the Windows version of PS - E for Mac

  I just bought Photoshop elements 14, and while I took care to check that it was the 'full' version, that I bought (not upgraded) I didn't notice that I had bought the version of Windows for my Mac! You wonder how to change that... I used Adobe cat successfully before but at 16:00 on Wednesday, he claims it is closed (same thing happened yesterday, as a day of week I might add). Why is closed, when they do not provide an alternative email address, and even a phone number is hard to find? I really don't understand why Adobe wants to make things so difficult for their customers - it's so frustrating.

  Hello

  Please see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/Exchange-product-language-OS.html

• How to connect the TV to Satellite L300-209?

  Hello

  I have laptop Satellite L300 Searies-209 and I need to connect the LCD Sony TV

  The Outbut is inbut HDMI and VGA
  When I connect the wire nothing happen in the LCD TV

  If anyone can help me please help me in this problem

  Hello

  The laptop seems to support only a single video output port and it's port VGA/monitor.

  I don't know which ports support TV, but you need a VGA cable to connect the laptop to a monitor.
  If TV would support a DVI port, then you could try a VGA to DVI.

  Welcome them