HP Photosmart D7460: print system failure "0Xc18a0106" (HP Photosmart D7460)

< it="" is="" a="" photosmart="" printer,="" not="" inkjet,="" but="" i="" could="" not="" find="" a="" perfect="" board="">>

Anyone know how to do a MASTER RESET on a HP Photosmart D7460?

Please do not send me links that list the steps to follow for a different model. He probably wouldn't have the same buttons.

I just spent $ 60 + ink cartridges, but it does not solve the problem.

I tried to unplug the printer while on, unplug the USB cable, then reconnect everything put back again, nothing works.

HP can't do this no more, and I was told to post here on the Forum.

Thank you!!

Jabzi, thank you very much for your quick response.

I need aplogize because I incorrectly titled as 'Print System Failure ' message instead of the correct "ink " system failure

Here are the steps that erased my error and rendering my D7460 work also.

The error is displayed on the screen, do the following:

(1) press on & press and hold simultaneously the buttons print Photos and red eye removal, and then release both buttons.

(the display should say "Enter spécial key combo")

(2) press on & release the following buttons in sequence:

-Red eye removal

-Print Photo

-Red eye removal

(the display should now show a key code (do not act; you won't need - mine was PRXXFN0723AR).)

(3) tap (on screen) the as many times as necessary to get the message across, right arrow icon

"Menu of the System Configuration.

(4) press on & release the OK button.

On the title banner, you should see the letters "FACTOR" and the "hardware failure status" is displayed.

(5) press on & release the OK button.

Now it should display the message "disabled hardware failure status. Press Cancel to continue.

(6) press on & release the Cancel button as many times as necessary to get one of these two messages:

'Welcome to Photosmart Express' or 'Ink system failure' (with the error code 00XX0000)

(7) turn off the printer using the power button.

(8) unplug the power cord at the same time, the rear of the printer and the wall outlet.

(9) wait 30 seconds (really, wait too long)

Chart 10) power cord in the wall FIRST, and then at the back of the printer.

(11) turn on printer using the power button / stop.

NOTE: If the screen displays the message "printer preparation occurring", DO NOT interrupt it.

You can tap on tools (key) and clean the cartridges, align printer or whatever it is you want to do.

I hope this is the right solution for all who have this error!

Tags: HP Printers

Similar Questions

  • 'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309

    'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help

    Have you tried the steps outlined in this article:
    http://support.HP.com/us-en/document/c03081973

    If not try the steps and tell us if it helps.

    Good luck!

  • Printer HP Photosmart Plus Plus shows continuously "ink system failure - 0x19a003e.

    I bought my computer Mac and HP Photosmart together, as it was advised the best printer for Mac.

    Since I get the above error message. Can get 1 week of printing, before the error message appears.

    Had replaced print head, printer sent replacement, another print head has published and now waiting on my 2nd replacement printer.

    I followed the HP guides when I receive messages error, but without success.

    My children have a HP Deskjet which I use without any problems on my Mac?

    Because the printer is not so old and still under warranty, HP replaces it, but I'm sick of not having a printer that works every time and duty wait for replacements...

    Any suggestion from anyone that I could get hurt?

    Or what I can try?

    I get to the stage where I can request a full refund

    Hi Truckiem,

    If I'm not wrong you use: HP Photosmart Plus e-All-in-One Printer (B210a) and you get an error message 'Ink SYSTEM FAILURE' on the screen touch printer.

    You will see the small icon home and U turn the arrow on the touch screen of the printer which is invisible

    Please complete step on touch screen of the printer and, if you are below the following step, make sure that both buttons are invisible.

    Tap the Panel to order 4 times in that order

    Tap the inverted arrow / U turn key lower left (BL)
    Then press the small icon of home top left (TL)
    Tap the inverted arrow / U turn key left lower BL
    Then, once more to touch the opposite arrow / U turn key lower left (BL)

    You will see Menu Support displayed on the touch screen of the printer, and then press OK

    Support touch - Touch OK, use the button to the right and select Menu Reset - Touch OK, use the ScrollBar or the right arrow to select Reset SEMIFULL - the printer turns off automatically.

    Then turn on the printer manually

    Select the language: English

    Country: USA

    If you get the same ink system failure error message, it seems to be a problem with the printhead Assembly.
    Or you can replace the printer of the store where you buy or contact HP Chat support or voice and have it replaced.

  • HP Photosmart 6380 printer: ink system failure Oxc19a0020 HP6380 Photosmart all-in-one

    HP Photosmart 6380 while a printer 0xc19a0020 I unplugged, ink system failure it and reinsert the ink cartridges, still get the same error message.  What to do next?

    Hello

    I regret to inform that Oxc19a0020 ink system failure is a fatal problem.

    Please contact your local HP support for more support information.

  • Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

    I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

    Does anyone have any suggestions?

    Hey Spider! First of all welcome on the forum.

    I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

    After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

    Thank you

    SeanS

  • I get the 0xc19a0042 ink system failure on my HP Photosmart B210 printer

    I followed the instructions for disassembly and cleaning the printhead twice, as well as to disconnect and reconnect and the 0xc19a0042 ink system failure message continues to show and I can't print or scan with my B210 printer. I now seek to replace the print head, but could not find the info on all the links from HP that I have searchded. Any help suggestions greatly appreciated.

    And if you are in the United States and want to order it from the hp online store: http://www.shopping.hp.com/en_US/home-office/-/search-Browse?SearchParameter=%26%40QueryTerm%3DPhotosmart%2BB210%2Bprinthead%26prodsubgrp%3DPrintheads&PageSize=15&SearchTerm=Photosmart+B210+printhead

  • Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

    Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

    How can I solve this problem?

    Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

    http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

  • Photosmart C7280 All in One Printer, Error Message - ink system failure

    Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

    The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

    Thank you, Cynthia

    This might help you:

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

  • Printer HP Photosmart C6150 all-in-One. The Error Message ink system failure, error: 0xc18a0001

    I have a HP; hotosmart C6150 all-in-One printer. My magenta ink cartridge ran out of ink. Several days passed and I would like to select print using only black ink cartridge. Now my printer has stopped working. I now get the message ink system failure, error: 0xc18a0001. Just in from a new cartridge HP magenta ink and installed but I keep getting the consignment: ink system failure, error: 0xc18a0001. How can I get my printer working again?

    [Personal information]

    The printer service: to replace. If it's under warranty we achieve for you if you call 1800-474-6836. If you are not in the warranty, we offer a few solutions for you. We always have available agents. Please call anytime.

    When a solution is found, please indicate the position that solves your problem.

    If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
    Although I work for HP, my messages and responses are my own opinion and not of HP

  • Photosmart 3210 All printer ink system failure

    Printer will not print scan or copy.  I get ink system has failed.  Cannot copy.  receive faxes or print.  refer to the printer documentation.  error: 0xc18a0001.

    I found this in another forum, and that's what worked for me. I'm posting because wasting time looking for a solution was worth to sign up to this forum and I hope that save others wasting their time to.

    Re: ink system failure Solution of jamest601 (09/09/11 04:00) reply + / -

     
  • Message 'Ink system failure' error 0xc05d1281 in Photosmart C7250 Printer

    First message was "cartridge after expiry."  I turned and turn on the printer. Tried to print again. New message has been

    'Ink system failure', I bought a new cartridge, installed, tried again, still 'ink system failure '.  The printer is a 3 in 1, black Plus 5.

    About 4 years.

    Hello rubadub,.

    Regarding your question, here is the troubleshooting HP article.

    An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

    Ink system failures are usually in the ink cartridge, the print head or in the printer. Since you have already replaced the ink cartridge, the problem lies in the print head or the printer.

    The C7250 print head is permanent and cannot be replaced or cleaned outside the aircraft so there is not much we can do with working with her.

    Go through the article and follow the steps in the order

    1. remove the cartridges and install it

    2. use the automatic printhead cleaning utility (sometimes you may need to run this several times)

    3 reset the product

    4 maintain the product

    If the first three steps do not resolve the problem, there is not much to service other than the product. Return ticket if the first three steps help or do not help, maybe we can think outside of the box before going to the service, but we'll see if the standard general steps work.

  • 0xc19a0023 of Photosmart ink system failure

    I have a photosmart C6380 All - In - one printer which has an error message on that says "ink system failure, 0xc19a0023 please turn printer market."  Followed all directions under the heading contact hp as turning point on and outside, by unplugging all the cords, clean the electrical contacts, etc..  Bought in 3/09, so out of warranty.  Called Hp and has spent 37 minutes on the line with them, trying to sell me a new printer without ever discussing the problem with someone difficult to understand.  Was willing to pay $20 for 14 days tech support but kept making pressure to pay $37.for 1 year of technical support.    We know what means this code and how to fix it?  Have never had any other problems with the printer and still use the correct HP with her ink cartridges. Have windows Vista on my computer.  Thank you!

    Usually with a message like that, we recommend you first disconnected the USB cable if it is connected to a computer. Then remove the cartridges from the printer as well. With the always on power, unplug the power cord at the back of the printer, as well as the wall, and then wait for about 60 seconds. After that, plug it to the wall first, then the printer, allowing it to start.

    If it gives you a message similar to "the following ink cartridges appear to be missing or corrupt" you can reinstall them at this time, when you are prompted.

    (If you do not have a keyboard, then you won't be able to do the 2 steps. Please see below.)

    If you get the error message even if you have a numeric keypad on the printer, proceed in the same way, but before plugging it back in, press and hold the button # with the number 3 and plug the power cord into the printer and now the buttons. Once the printer starts to show he'll be back to the top, you can release the buttons and allow him to return to the top.

    If you continue to get the message, then do the same thing except hold # and number 6 on the keypad and it allow to return to the top.

    If you still get the message after all the steps above are performed, please contact HP for a replacement, if your printer is still under warranty. If the printer is out of warranty, then we have still generally upgrade options available, and you may be able to get a replacement printer (yet a different or better model) cheaper to go buy a new one. It is usually a good idea to call to see what your options may be at this time for this on phone support options. Beyond what I posted, it is not a lot of telephone support can do for you, so, in my opinion, I would try to focus on the upgrade options.

  • Printer ink system failure message all-in-one HP 6180

    I can't print because of the error message following on my all-in-one HP 6180 printer screen:

    Ink system failure. Refer to the documentation of the printer Oxc18a0201. I followed all the recommendations on documentation of the printer, such as: installation later HP updates, turn off the printer and remove the power cord, remove all the ink cartridges and then putting back in when prompted. Also, I rebooted my computer. None of these recommendations have worked. I need help! Thank you.

    Hello Kah524,

    I met your questions and we have a solution for this and you can try it, but that would apply only on starting with '0xC18A' and not '0xc19a error codes.

    Try the following steps for Photosmart C7280:

    A. - Press and hold the "*" key.

    B. - Press the "#" and release both buttons.

    Display should say "enter special key Combo".

    C. - Press and release in sequence the buttons '1', '2' and '3 '.

    Display should say "Support" and display the FW rev (something like R0631R)

    Press and release the right arrow button until the display shows "Menu of the System Configuration'.

    Press and release the OK"" button.

    Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

    Press and release the OK"" button.

    Display should say "hardware failure status: clear." Press OK to erase.

    Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

    Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

    Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

    Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

    Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

    If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

    To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

    If the error is still there, or reoccurs replace the unit.

    --------------------------------------------------​---

    0XC19a error messages, the printer can be retrieved.

    Good luck and if that fixes the problem please click on Bravo...

    ---------------------------------

    Although I am an employee of HP, I speak for me.

  • The system failure error 0xc18a0206 for HP Photosmart c6180 all-in-one of the ink...

    Printer has not been used for a few months... Troubleshooting restart did not work... Warranty has expired and I need to print an urgent... Help, please!

    Go here and follow the instructions:

    http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1

    Worked for me!

    {deleted content}

    -pojjl

  • '0xc19a0042, ink system failure' on HP Photosmart B209a-m

    Printer: HP Photosmart B209a-m

    Computer: HP Vista

    I followed all the directions for turning printer works; turn off, unplug, plug in the unit, then by restarting. Restarted the computer. Always got message for ink system failure. What to do next?

    Thank you!

    For the failures of the system of ink and 0 x type codes, please see the document located here.

    Hope this helps, Taffycat.

Maybe you are looking for