HP Photosmart D7560 h Bluetooth Menu not opening not

Similar Questions

• HP Photosmart C6300: Photomsart C6300 HP cannot open the Bluetooth Menu and cannot install CD as ive got no CD player

  So I wanted to install my wireless printer and connected to the internet just fine. However, aparantly, you must install it via the CD that is given but my laptop is not a CD ROM drive so I can't do that. Is anyway to install it without using the CD?

  Second, I tried to set up via Bluetooth and I go to settings and scroll down to the "Bluetooth Menu" and when I click OK, it opens all open all the other menus, for example, tools, Netowork, etc..

  What continues? :/

  I do not have any connected USB or Ethernet cables because I read somewhere that it may not allow you to open the Bluetooth Menu.

  Hello

  For the second question: it requires HP USB Bluetooth adapter, you bought this part mentioned on his page:

  http://support.HP.com/us-en/document/c01490922

  And for the first question, if please download the suite of folloqing and install on your computer:

  http://ftp.HP.com/pub/softlib/software13/COL30126/MP-109713-3/PS_AIO_04_C6300_Net_Full_Win_WW_140_408-5.exe

  Kind regards.

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Buttons to blend into the background. Button menu to open does not have a menu.

  Button, button "home" to move forward, back, bookmark this page button, show your bookmarks and open menu buttons are present, but you can not see them. Button menu to open does not have a menu drop-down.

  . Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Photosmart D7560 do not print envelopes-> load paper into the main tray

  My photosmart D7560 h will not print envelopes, after having moved the envelope position for printing, the message "loading the paper in the main tray is displayed.  It prints correctly the data of envelope on a sheet of paper 8.5 x 11.  The Setup is for a #10 envelope.  Envelopes are self-sealing.  I tried to crease the edge better but that did not help.  I tried a non-self seal (who had a top letterhead so I couldn't use it for this shipment) and he worked.  Is it possible to do self seal envelopes work in this printer?

  You have the flap folded inside the envelope, so that it does not stick?

• When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  What you see is exactly the way it should work. Open the site your Finder window opens, so you can access the .muse file you want to open. Recently opened (just below it) will show the list of sites you have worked on lately. I don't know what else await you.

  I should probably see a list of site temp I want to open or DELETE?

  No, Muse or any other program besides will not open a file that you do not select to open. To remove a site simply open Finder on Mac go to the location of the file and delete it in one of the many ways that a Mac allows you to do.

• Satellite M40-185 - Bluetooth is not ready - can not use

  I have the Satellite M40-185

  I cann't use bluetooth. The problem is:
  At the opening of all programs--> Toshiba--> bluetooth--> bluetooth settings--> selection of menu bluetooth--> add new connection, a pop up appears with a msg "Bluetooth is not ready", then the bluetooth icon appears in the status bar.

  BUT I still cann't use Bluetooth.

  ALSO, when I open--> open device Bluetooth PCMCIA card Manager, a window appears with a button asking me to install a program.

  What is it and where can I find it?
  Do you think that this is the problem?

  In your case, I recommend using a simply external USB Bluetooth key.
  It of easy to use and the installation is very simple.

• MacBook Bluetooth is not available.

  Suddenly my MacBook 9.2 running El Capitan has a line winding through the bluetooth menu bar symbol, and when the cursor is clicked, it says Bluetooth is not available.  Tried to reset the SMC, by removing the Bluetooth plist file in the Library/preferences /, no joy.  That's happened this morning when turned on.

  Try resetting the SMC again. If this does not help, bring it in to test.

  Barry

• Satellite U400-17Y - Bluetooth does not work after upgrade to win 10

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "Error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

• Why mackbook Airdrop and bluetooth can not work with iphone 5s?

  Hello.

  I have a macbook pro late 2011 (os x El Captain) and iPhone 5s version 9.1.2

  Question 2:

  1. I turn on and correctly configured AirDrop (select all) but Airdrop macbook can't find iPhone 5s.

  Why? because my macbook before 2012?

  2 - Iphone can not connected with bluetooth macbook.

  The first macbook paired iphone / go to the bluetooth menu in mac / iphone / click on to connect to the network

  then I see this notification:

  the network is unavailable. Make sure that your access is activated.

  Please help me

  Thank you

  1. it's okay.

  To send items to an iPhone, iPad or iPod touch, you have a 2012 model or more recent Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

  Use AirDrop to send the contents of your Mac - Apple Support

  2 iPhone Bluetooth is not designed for the transfer of files. You can send the files some other way, such as e-mail, Cloud Computing service or photo stream (for photos).

• Peripheral Bluetooth is not ready!

  I have a Qosmio G10 and have had this ongoing problem with the installation of bluetooth devices. Whenever I open Bluetooth and go to connect a device, it says "bluetooth is not ready." Help? Someone, please.

  Hello MB

  First of all, check if the Bluetooth module is installed on your device. If Yes, in the lower corner of your laptop, there must be Bluetooth label.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=96&service=EU&FID=tro000000189d

  If there is no label your device doesn't have Bluetooth, and it is a reason for this message that occurs.

  Good bye

• Bluetooth does not

  Sir, I need your help on my computer hp pavilion laptop g6 laptop that my bluetooth is not working not even if its on I cannot receive bluetooth setting open data and can't send, I can't identify what the problem is?

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Click on the link below. Enter your product number. After you enter the PN, click Next, and then choose software & Drivers.On using the following page drop-down list to select your operating system. A list will fill with the drivers. Install a driver updated to BT.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us & LC = in

• "Bluetooth is not ready" and can not be click the "Radio Power"?

  Hello world

  Hope someone can help me:

  The pre-installed bluetooth software works fine on my Toshiba laptop no, until it suddenly collapsed bluetooth icon appear on the taskbar. When I try to connect to open all of the utilities of Bluetooth, the system responds indicating that "Bluetooth is not ready." I tried to make a new connection, but I get the same answer, etc.

  Bluetooth Stack for Windows by Toshiba
  Version: 5.10.10 (SO)
  Bluetooth specification: Version 2.0, 1.2, and 1.1

  I checked that my PC portable switch antenna WLAN is available on.
  Inside the "Bluetooth settings"-> Bluetooth-> Options...-> Bluetooth Radio Power button is "Radio is off," I tried to click on it, but it gives me no answer (that is, she is still programmed in Radio is disabled).

  No idea what is wrong all the world?

  Can you see the Device Manager
  the "Bluetooth" section under your
  Device "Bluetooth USB Controller?

• Qosmio X 770-Bluetooth does not turn on

  Hello

  I have a toshiba Qosmio X 770 with built in without wireless/bluetooth. I've had the computer for almost a year and finally bought a bluetooth device to use. However, when you set up the bluetooth on my computer, the first error I recived was "Bluetooth is not ready." Of course, I confirmed that bluetooth is activated (fn + f8) and tried with wireless on and outside.

  I also received the error "Autoseach stopped because bluetooth is turned off" when I enabled bluetooth Assistant. Again, the bluetooth is clearly defined on it, and when I open the bluetooth settings > options, the power button is set to "Turn on Bluetooth function." Now for the strange parts.

  I checked my device manager and my only bluetooth 'device' was "bluetooth RFCOMM", and I was expecting a real piece of material to be included.

  Since then, I uninstalled my pile to course and downloaded and installed the battery current 8.00.12. I have also reinstalled the filter. That did not always help, and I still get the error messages "bluetooth is not ready" and "power of bluetooth is disabled.

  In all, it seems that my computer does not have a bluetooth card, although it has all the software and of course, I bought the bluetooth. Always have the reception haha. It seems that he just has no power.

  This question seems similar to the unresolved to the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69223&tstart=0 post

  Any help would be appreciated!
  Thank you.

  I found a newer version of Toshiba Bluetooth stack Toshiba page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=3461138&PF=true

  Its v 9.10.00T compatible with Windows 7 (32-bit), Windows 7 (64 bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows XP SP2/SP3

  I put t know what your laptop wireless network card is supported but the Wlan driver and the appropriate Bluetooth filter package must be installed before BT stack

• Bluetooth is not ready after waking from sleep on Windows 7

  After updating my Tecra M10 Windows Vista x 64 Enterprise to Windows 7 x 64 enterprise, sometimes, when I wake up the laptop from sleep, Bluetooth is not ready.

  Hibernation does not solve the problem, he needs a reset which is a problem for me because I usually have a lot of open applications.
  In this case, the only Bluetooth devices in Device Manager are:

  * Bluetooth RFCOMM
  * Bluetooth USB Controller-5 at TOSHIBA

  When everything works well, the Bluetooth devices in Device Manager are:

  * Bluetooth RFBUS
  * Bluetooth RFCOMM
  * Bluetooth RFHID
  * Bluetooth USB Controller-5 at TOSHIBA

  How can I restart Bluetooth without having to restart the entire system? Turn wireless on and off the silder side does not work.

  Thank you
  Paulo Morgado

  Thanks for sharing!