HP Photosmart more B210e - no more paper - load paper into the main tray

Similar Questions

• Photosmart D7560 do not print envelopes-> load paper into the main tray

  My photosmart D7560 h will not print envelopes, after having moved the envelope position for printing, the message "loading the paper in the main tray is displayed.  It prints correctly the data of envelope on a sheet of paper 8.5 x 11.  The Setup is for a #10 envelope.  Envelopes are self-sealing.  I tried to crease the edge better but that did not help.  I tried a non-self seal (who had a top letterhead so I couldn't use it for this shipment) and he worked.  Is it possible to do self seal envelopes work in this printer?

  You have the flap folded inside the envelope, so that it does not stick?

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• C309a paper in the main tray

  When I try to print A4 a message somes up to say there is no paper in the photo tray. I've been using this printer for centuries and it is a new problem.

  When printing using HP creations greeting cards printing that results is in the wrong sense - that is, if I make a map of landscape it print as portrait and vice versa. It is also a new problem that I made my own cards for a while.

  I tried all the usual remedies such as the closure of the entire system and start again. My pc does not seem to apply to the printer.

  The problem has been solved now. He was made to do with the printer driver.

  I downloaded the software from the HP website after you have uninstalled my old version and now the system works OK. I'm back in business!

  Helpline thanks for your help.

  GA43

• Photosmart 7525: photosmart 7525 photo tray - how to get the photo tray to use instead of the main tray

  I use a computer from Dell using Windows 8.1 desktop 64-bit.  Printer is HP Photosmart all-in-one 7525.  The software is Microsoft Picture Manager.   I want to print a photo .jpg of MS Picture Manager for paper photo 4 x 6 I have loaded in the photo printer paper tray.  The problem is that printing is still trying to main paper tray in the printer.  Remove all paper from the main tray just causes the print operation to not to say that the main paper tray is in the paper.    If the main tray contains plain paper, the photo printed on this paper.  I have the printer set up to use the photo tray.  I select HP 4 x 6 paper in MS Picture Manager and also set Picture Manager to the highest print quality.  But no mater what I tried, the printer selects tray to main paper rather than the smaller photo paper tray.  The printed image is 4 x 6, but it is printing on paper of the main plate.  What I am doing wrong?

  Well - I found that among the pop ups related print had a link 'options' that seems to indicate that it could be me trying to change things which were not suitable for my printer - so I didn't click the link.  So this time I didn't click the link and he showed me up - again - to set the s/w to use the photo tray.  So I did and the photo made print from the photo rather than the main tray tray.  So now I know how to do and don't need to mess with trinkets or all other signs, you've shown me.  Thank you for taking the time to try to help me.  I appreciate your help.  CR

• My Photosmart says it's out of paper without. I have've tried to load more paper, remove the paper

  My Photosmart C6250 will not print because I keep getting messages that it is paper, when the main paper tray is full. I can't understand the problem. I am trying to print on photo paper glossy mil 10.4 for inkjet printers.

  Troubleshooting page here can help.  For glossy thick paper, it can help to fill the Pan no more than half full.  If you print a lot of this media, you probably need to clean the rolls of food because brilliant media can transfer the material to the rollers and prevent their good pick-up.

• I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation.

  I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation. It it not a cartridge 564xl. I am really considering to resume this printer and turning it.

  Hello

  What seems to be the issue. His are more in there or something like that? If so, check the icon on top of the cartridge, it should be a Hexagon, if you want to mount a "bow tie" it does not, since it is a photocartridge that is not supported by your printer.

• ODI can load data into the planning and REPLACE the existing data?

  Hello
  ODI (9.3.1.1) can load data into the planning and REPLACE the existing data?
  Currently of our ODI by "ADD" load to existing data data - so that is I accidentally run the load twice, it would be double planning numbers. I don't know how to do it to REPLACE so that running more than twice has no effect.

  With the help of the essbase adapter you would use a rule of load, in the State of charge, you can set whether to replace or add to existing values. It is not difficult to pass.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I try to print full photo of the body, but need to fit the image horizontally, not vertically. I turn picture or turn paper into the printer?

  Newbie needs help!

  I try to print the photo of full body, but need to fit the image horizontally, not vertically.  I turn picture or turn paper into the printer?

  What version of Windows are you using?

  You can try to open the picture in paint and adjust the print settings and change the orientation from there.

• My Canon Pixma 250 pull the paper into the machine for printing

  My printer will not pull the paper into the machine for printing. I tried to clean the roller, it won't even. Any suggestions to fix this?

  Hello

  I suggest you to contact Canon support for assistance.

  http://USA.Canon.com/Cusa/support

• Photosmart premium will not print from the main tray

  I have a HP Photosmart Premium.  It won't print or copy from the main tray.  Despite the fact that I specifically designated main tray settings, he continues to try to print from the photo tray. How can I fix it?

  My recommendation would be to define the default values for what you do most often.  You can assign the parameter of the bins to automatic and the printer should draw the correct tray based on the other parameters of size and type of media.  If you experience problems with the automatic selection of tray for a particular document or a picture, you can specify the drawer wished for this print job.

  I'm a link the User Guide for your printer.  Click here  I thought you might find useful.

• How to load data into the App MVDEMO schema example

  Hi all

  I'm a POC on Oracle Mapviewer and try to build some reports in OBIEE using MApviewer.

  This POC, I use Oracle MVDEMO example Data (11g). I think that these sample data covers few countries like the USA.

  I need to make PDS for the Brazil, I downloaded data from the map of the site as Shapefiles Brazil

  http://GADM.org/country

  in these data of the Brazil, I got from .csv files 4 extensions, .dbf, .shp and SHX

  I need to know how can I load these files into my Oracle 11 g DB? Should I load data into the same pattern of mvdemo, if yes then which table?

  Any help will be appreciated a lot.

  Thank you

  Amit

  Use the Java shapefile Converter utility (http://www.oracle.com/technetwork/database/options/spatialandgraph/downloads/index-093371.html)

  GDAL (gdal.org) FME (Safe) or or MapBuilder.

  Specify the to SRID (i.e. the SRID for loading in Oracle geoms) 4326 or 8307.

  Load into a new table named anything you want. for example brazil_gadm with the geometry named GEOMETRY column

  Once it's loaded, verify that there is an entry for the table and column (BRAZIL_GADM, GEOMETRY) in user_sdo_geom_metadata

  Create a space on brazil_gadm.geometry index if the tool has not created a.

  Add the definitions of topic for the country, State or whatever the admin areas exist in the dataset.

  Import them as layers in OBIEE.

• My PDF files is more loaded correctly into the Chrome browser

  http://prosol1.com/Paragon.html

  I don't know if this is the right forum with this issue, but it has something to do with the PDFs.  Please visit the web page above.  Click on one of the links to the PDF newsletter.  When I downloaded these files on the server originally, I tested them and they are all loading correctly in the web browser.  Now, none of them are visible in the Chrome browser.  There are error messages popping up.

  When you right-click on them and save to your desktop and open, they work very well.  Also, I just tested the links above in MS IE and all 3 of them works fine there as well - PDFs loading in Internet explore as they should.

  Does anyone know what is the problem?  Any help is appreciated.

  It looks like a problem of Chrome.

• Loading data into the env DWH

  Hello

  We have an obligation to delete and load once a week: 20 million records. Some bitmap indexes are available on the table.

  Please suggest me which option I should consider to load the data effectively.

  (1) drop index dynamically, load data and re-create indexes gather table / index stats after that load data.

  (2) set the unusable index and rebuild, gathering statistics for table / index after loading data. (reference https://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:2680568300346966968 ).

  If I choose option 2 is required to run command below during the loading process?

  alter session set skip_unusable_indexes=true;

  Thank you very much in advance for your help.

  -Suri

  A small question - since we are to transfer data in the main table that is the need to build on the work table index?

  Indexes on the partitioned table, the non-partitioned table must be compatible.

  I've never found useful to mark as unusable bitmap indexes need to be rebuilt anyway. Each bitmap index entry has bits for SEVERAL lines. And setting a bit in an entry means that the ILO should be DISABLED in all other entries.

  So it does not make much sense to try to use an unusable bitmap index and try to update to make it current.

  We did not score on the main table. Can I still use the technique of swap partition to load the data.  (Sorry for asking questions without trying, I'll try tomorrow)

  One of the tables must be partitioned. Given that the main table is NOT partitioned, then you partition the work table. The only working table has a partition segment. This segment is swapped with a stretch of the non-partitioned table.

  On the other hand note which option is recommended to load the data when we have no license to use partition.

  Delete the index and rebuild them. Like I said more high index bitmap needs to be rebuilt anyway.

• Loading data into the APEX problem

  Hello world...
  
  I am new to Oracle APEX and I am facing problems loading the data into the table. My problem is the text data are load with double quotes.
  
  Please suggest.
  
  Thank you
  Suresh

  Hello

  assuming that you load the data via the UI APEX via home > SQL Workshop > utilities > data workshop > Load Data
  By also provide more information like the version used, APEX how/where you download data, etc.

  If you put your data in a file and select ' 'Download the file (separated by commas or tabs' then on the next screen, you can field 'Optionally Enclosed By' in double quotes ("").
  This should remove the double quotes of the data during the import.

  Concerning
  Bottom