I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation.

Similar Questions

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• New 564 black ink cartridge printing gray and Spotty - as if almost out of ink

  I have a PhotoSmart all-in - One C309A

  I have Windows 7 64 bit

  It's a wireless connection

  I replaced the black ink cartridge 564 today and it does not work

  I don't get the error messages

  Can I change the font of document to another color (red for example) and it prints well

  If I try to print in black, the letters are gray and spotted - as if I was almost out of ink.

  The ink level indicates the black cartridge is full.

  Thank you-

  I suggest you start the troubleshooting steps described in this document.  If this does not resolve the issue post here can help.

• Photosmart 6520 does not print the new black ink cartridge

  My new black ink no longer works on the printer.  This seems to be a problem throughout all of the printers HP no matter what model.  Did someone with similar problems had success getting their black to print despite all recommendations of manufacturing without success?  I have my printer just over a year.  I think it's ridiculous that a product falls down that quickly for money which is devoted to this topic.  I called HP for technical support and after doing all the things, he recommended that he told me that my printer is broken... is no longer under warranty... but he will sell me gladly one handed to nine for more than the cost I would pay if I bought it new from Amazon.  I trust is no longer the product... Why would I want one handed to nine?  Just looking for more tips out there who may have worked for others, before going out and buying an Epson.

  Had same problem, went out and bought new cartridges ink and all but worked black, what to do, throw it in the trash? or have a go at fixing, because I had just spent more than $90 on new cartridges, I thought I'd be there is attachment.

  To cut a long story short, that I managed to detach, scratching the dining room in the process, wife not impressed! puledl the ink outside, white liquor dispenser put spray gave him a good squirt, put back together, it now works like a new! Yay! Geez I'm so smart.

• Photosmart reloaded 5512 black ink cartridge installation program does not

  I cleaned up the location of the cartridge and the cartridge itself and seems not even try to print. Absolutely nothing goes to the page.

  Hello

  Installation cartridges are manufactured for one-time use, because they are necessary to prepare the printer for first time use. As the nows printer cartridges to install it you cannot use them again.

• HP Photosmart more B210A: black ink cartridge will not print.

  The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

  The only change is that I have installed all new cartridges when all printing has become very low.

  Help, please.  Thank you.

  Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

• Black ink cartridge will not print in HP Photosmart Plus B209

  I have had this printer for years.  I had a few problems here and there, but it was basically a machine reliable and quality.  A week or two ago, my HP black ink cartridge ran out.  I tried an ink cartridge not HP for the first time.  (Gasp!)  It did not work.  I assumed it was less and I pulled it.  I then installed a new HP black cartridge 564XL.  But still no black ink is printed.  I ran 'clean' in the Tools menu print head several times.  I cleaned the electrical contacts.  I made sure that the evacuation of cartridge area was clear.  I removed the cartridges, unplugged for a minute or two and reinstalled them.  Nothing has worked.  Probably put in this cartridge not HP for a few minutes is not totally destroy my printer!   Any help will be greatly appreciated.

  Well, this printer has been crossed at my nearest store Big Box Office Supply for recycling.  I ordered a new printer (* certainly * NOT a HP!) and it will be delivered today.  HP, when figure you you lose your faithful?  There was a time I thought that all that HP was almost sacred in the world of technology.  No more, no more.

• Photosmart HP 7510: Change what black ink cartridge is used.

  Our 7510 HP ink slots for small and XL cartridges, however it will not use the small cartridge ink. How to change the parameters to pass to the thin cartridge XL, small is running out of ink and I can't find the black ink cartridge (Photo) in stores now. I bought two 'small', one was a XL, not labelled as such and we ordered cartridges from HP on the web and they were too big too. I need to be able to use the XL Black ink cartridge that is installed.

  Thank you..

  Hello

  First, XL ink cartridges are physically the same size with normal cartridges (same number). The difference is more inks XL cartridges.

  Your printer has 2 black ink cartridges, one narrower called Photo ink cartridge and one large/more bigger called black ink cartridge. When printing in grayscale, the printer will mix all the colors to give B & W. If you want to print black ink only, you must indicate to your printer. Please try

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on advanced.
  d select "Black ink" only for printing in grayscale
  (e) click Ok/apply.
  
  Note: printer must still all color inks and it will consume a very small amount of ink over the warmng of trial.
  
  Kind regards.

• Problem printing HP Photosmart series 4100 with black ink cartridge

  Although the two black ink cartridges indicate that they r at least 1/2 they full r impression as if they were empty. Pale color impossible to read. What is the problem?

  Hi Bialy,

  I found the troubleshooting guide for the issue of fading print.

  Please try and let us know the status.

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani

• Photosmart HP 7520 - selection between large and small black ink cartridges

  Hello

  How to choose the big back in print cartridge. 564 large black ink cartridge and the small cartridge is 564 photo XL.  The printer uses only the thin cartridge ink and not the large carridge. Is it possible to select one cartridge to another?

  Thank you

  So looks like you do not print photos and print text documents only the photo ink is used.  Does not serve ordinary black ink.  Are read you the ink gauge of the printer or the computer?  They both agree?  I have some additional questions.

  1. What is the ink level estimated for each cartridge according to the gauge of printer ink?
  2. Are one of the toner cartridges "SETUP"?  If so, which?
  3. Are the HP brand ink cartridges?
  4. Have you removed and reinstalled ink cartridges?  Does make a difference.
  5. You have run the print head cleaning utility?  To do this, click the key button, then Tools , then on print head cleaning.  I ran 2 or 3 times.

  Are there changes?

• Photosmart 7520e: black ink cartridge doesn't work on Photosmart 7520e

  Black ink cartridge stopped working.  I replaced the cartridge with a new cartridge, HP 564 XL.  Used printer clean print head and Align tools.  Received message 'alignment failed.  Cartiridges are defined for quality parameters' the printer is off guaranteed so no help from HP.  Does anyone have any suggestions as to what to do?

  Hi @aquaharry,

  Welcome to the Forums of HP Support! I see that you have recently changed the black cartridge on your HP Photosmart 7520 and now you cannot print. You get a "alignment failed.  Cartridges are defined for quality parameters "."

  I wish you continue troubleshooting here: color or black ink not print

  Complete all of THE steps and make sure that the cartridges are properly ventilated.

  What are the results, you are FTA now to complete a successful harmonization?

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can easily say 'Thank you' by pressing the "Thumbs up" icon.

• Black ink cartridge HP Photosmart C309 to print not

  All of a sudden my printer does not print any black.  I have cleaned the print head (by using tools of the printer), came out of the cartridge and shook to see if he has really ink in it (printer says that it is complete), and it spend it.  The printer has been used regularly - it's not dry.  I tried to print the "status report" and the only thing that prints is the ink supply photos.  The thick black cartridge shows nothing, as if the cartridge is empty.  Can anyone help?

  Hi all

  my HP Photosmart Premium C309a was partially by printing in black and white only, when black has failed. I thought that the startup ink level may have been wrong on the front panel, so I bought a new black ink cartridge. Same problem and so I found this forum. I did a clean cartridge and the black began to work again. It is certainly a matter of keep an eye, and not one I am happy to know. My printer is only 1 month.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Use black ink cartridges into the two slots? HP Photosmart C4795 - no color cc = us

  Can I use black ink cartridges into the two slots? HP Photosmart C4795 - no color, to save money?

  Hey JJ - B,.

  You cannot use a black cartridge in both slots. The print head channels are different for print 3 colors in a slot vs only black print out on each other. Using black in the two slots certaining most will cause errors and possibly damage the printer.

  Is there a reason you want to run the two blacks to be with? You can still print with only the back cartridge installed.

  Good luck!

  Sean