XPS15z L511z won't start (white screen) and a sound signal to any key shot.

Similar Questions

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Start white screen and other problems

  I don't know what exactly caused this do. I turned on my computer as usual, but instead of start normally, the computer showed the tutorial screen that you see when you start your computer for the first time.
  When I went, I found that all applications on my startup screen have disappeared, the only thing that came with a result when you use the search tool is Google Chrome. More of this, I am unable to access or change the settings for my PC, create new folders, etc. (the drop down just 'empty' bed) or pin programs to my taskbar. My desktop items also have this box little pop up next to them when I hover over them.
  I started my computer in safe mode, but the problem still persists.
  Help would be greatly appreciated.

  Brilliant Hello,

  Thank you for the update on the issue.

  According to the result of the scan SFC that he managed to find some damaged files, but could not fix some of them, it means that there is a corruption with your system files. To go further and to repair system files, so I suggest you run the DISM commands and see the are able to repair system files.

  Maintenance of the images of deployment and management (DISM) installs, uninstalls, configures, and updates features and CBS packages in Standard Windows 8 Embedded images (standard 8) offline and offline Windows Preinstallation Environment (Windows PE) 4.0 images. The commands and options that are available for servicing an image depending on whether the image is offline or online. All controls operate on a standard 8 offline image. Subsets of commands are available for the maintenance of an operating system.

  I suggest you run the commands in elevated command prompt and control below if this can help.

  • Press Windows key and X at the same time.
  • Choose line (Admin) command on the shortcut menu.
  • In the command prompt, type the following command and press ENTER:

  DISM / Online/Cleanup-Image /ScanHealth.

  This command is used to check if an image is repairable. Scan the image to check corruption. This operation may take several minutes.

  DISM / Online/Cleanup-Image /RestoreHealth

  This command is used to repair an image.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• T410 doesn't start, white screen and the keyboard does not power on.

  Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

  I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

  This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

  Thank you very much

  Pete

  It's the original configuration of your laptop:

  ThinkPad T410 2522BF1
  
  i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

  I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

  Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• my XP is not booting (white screen) and crashes at isapnp.sys then in safe mode.

  My XP Home Edition is not booting (white screen) and crashes at isapnp.sys then in safe mode. Please help as soon as possible because I need this platform for school!

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The symptom often means that your system is of a malicious software.

  With this particular symptom of hanging on isapnp.sys in Mode safe is to search for a driver of zero-byte length file in the c:\windows\system32\drivers folder.

  Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

  If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have,
  make a CD of bootable XP Recovery Console or Hiren Boot CD and don't forget.

  There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  You can access the folder and check if
  There is this action suspect file and take.

  Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

  c:\Windows\System32\Drivers

  Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

  If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

  dir *.sys

  Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to
  worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

  If you use just the Mini XP Mode a Hiren boot CD (which works as Office XP), navigate to the folder of the my
  Computer desktop icon and locates the suspect files.

  You really want to remove the suspicious file once you get running and you run some scans for malware, but if you are
  not sure what is the suspicious file or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

  For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

  Rename zigxrtml.sys zigxrtml.bad

  Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

  The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

  Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

  Reduce the risk of malware by running some scans.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, restart, test your task manager and we can repair any other pending issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• Satellite A200 - white screen and gel

  Hi Experts,

  I have this machine for 2 years. It was no problem. Last month, he began to display a white screen, and at the same time, it has been frozen after 3-4 hours running. Push the power button to restart, it fozen soon. I replaced a new fan and cleaned the dust inside. But the problem is still there. Someone has ideas what is the problem?

  Thanks in advance.

  Hello

  The issue appears only after a long period of use is good?
  Eventually the higher temperature affects the graphics chip.
  The question would appear again until the graphics chip to cool
  This is my theory
  What do you think about this?

  It could also be a RAM problem anything is possible and that is why each part must be verified
  In your case, I recommend you to contact a technician for laptop. The guys could check the parts. I mean it of better to check the hardware, then replace only the defective part rather than buy parts and hoped that the replacement would solve the problem.

  But listen buddy; If the graphics card chip is really affected then replace the motherboard and this could be a costly affair!

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.

• After the charge of the desktop, I get a white screen and can't do anything.

  After the charge of the desktop, I get a white screan and can't do anything. It keeps loading of other programs with just the white screan. When I hit CTRL ALT DELETE, my office appeared then disappeared. What can I do?

  Hi David,

  You meet a white screen on startup.

  Step 1: Check if the problem persists in safe mode

  A description of the options to start in Windows XP Mode

  Step 2: If the problem not in safe mode then put the computer to boot.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• Smartphones from blackBerry 7100 G white screen and I have to remove the battery, reinstall it.

  I'll be in the middle of typing, and then the screen turns white!. I have to take the battery out, put again and then I can get 5 more uses out of it and it white screens again. Sometimes I just need to make works with the black button on the top and it starts working again. What is the problem with my Blackberry? My company does not allow me to replace it because they are cheap. Any suggestions in addition to finding a new job? Boring it is slightly

  I found and installed the last o/s. MY Blackberrry still "white screens" randomly and I need either press the black button on the top several times or remove the battery and reset back to normal. New to the forum and made a typo

• a white screen and then the application crashes

  When I go to my iPhone mail app, there is just a white screen. Sometimes after a few seconds, the application crashes. I can't delete the app because it seems to be "built in". My mail works fine on the MacBook Pro and iPad. I tried all the suggestions on the forum.

  1. Warm reboot
  2. Toggle the settings of the aircraft
  3. Supprimer delete accounts, and then add them again
  4. Recover from a previous backup
  5. Hard Reset then retrieve

  Nothing effects mail app it seems be frozen piloted to white, so double-click on the "home" button I see the screen of e-mail in the list, but it is old age and if I select mail it displays the old page but all frozen. How can reset my mail without going through the whole hard reset, process to recover again everything seems to work.

  Update to iOS 9.3.2.

  Reset your network settings. Power cycle your iDevice.

  This should help.

• Satellite L300D-110 - white screen and continue to restart

  Hello

  I have a L300-110, this just started to happen when I turn on the laptop light power green lights then get white screen but if continue to restart the laptop starts to work again.

  Can anyone help?

  Hi thm1ele,

  You can access the BIOS or see something on an external monitor?