HP Print doctor - Oops page not found

Similar Questions

• Help HP & Learn Center... links lead to "page not found" at HP. Never worked months owned printer.

  Link on the 'HP help and Learn Center' software is almost never going nowhere on the HP site.  This software was installed that I installed the driver on my new HP LaserJet M251mw.  I guess that most of the people have because the printer model is not old.  Also that the software installed, he writes a check that he check my version of the software is the latest version.

  Except for the links of the menu bar at the top they all end in an error page 'page not found '...

  http://h20000.www2.HP.com/service/site/404/Bsc404_en.html

  who said: "we are very sorry!  ... The requested page is not found. ... " We apologize for the inconvenience!"

  I looked at the browser history to see what the links are like before he spread.  Here is the part of the link to 'Print information Pages...

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/ [...] [....]. PDF #nameddest = PrintInformationPa...

  I removed the part with "[...]" in which case it is printer personal identification information.  But as you can see it trying to access a specific PDF bookmark but is redirected to this URL to error.  It has been like that for the months that I have owned my printer.  I'm shocked that even if HP was a web maintenance that it still does not.

  I tried already support cat (I'm under warranty) but the person could not explain why the software did not work.  The tech just kept asking me my OS and if I wanted to install the driver or other software.  I told the tech...  Not as I said I have already installed the driver.  And that this software HP help and Learn Center was simply not working.  We went round and round on this point.  Very frustrating.

  This seems like a simple case of HP Web sites are broken and must be corrected.

  So, anyone can check the help links help & Learn Center are broken?

  Or does anyone have suggestions?

  Thank you.

  Hello uncore

  I'm sorry that you are having problems with help and Learning Center. Links should now work. Let me know if this isn't the case.

• "Page not found" HTTP 404

  When I try to activate Smart Print in the Bing toolbar, I get an error "Page not found" (HTTP404)

  My operating system is Windows 9, Explorer 9

  This is the first time I try to turn it on

  Hello

  Please activate from the following link:

  http://WWW8.HP.com/us/en/partner/Microsoft/Bing-bar-for-HP/Smart-print.html?JumpID=ex_r602_ww/en/HHO/IPG/XX-Mu-aw_chev/SmartPrint/Web

  Kind regards.

• Cannot connect to the 'HP connected' - page not found error?

  Hi guys,.

  I recently bought a HP5520 and trying to connect via connected HP.  I have never used wireless before printing so it's all a bit new to me, but I'm SURE it takes this hard.

  I finally managed to create an account in connected HP (which took several attempts on the 'create new account' link doesn't seem to work in Chrome) but now I can not connect the HP site connected to any browser.

  I go to the ePrint centre and connect you, that works very well:

  https://h30495.www3.HP.com/c/46359/us/en/

  And I am directed to open a session connected HP site where it says that I have will be automatically saved in:

  https://www.hpconnected.com/au/en/

  However, when I click on the link above, I show a blank page showing 'Page not found '.

  I tried this in Explorer, Chrome and Firefox and get the same results.

  I use a PC with Windows 7.

  It has been a few hours now and I can still print even a simple page of text... Can someone please help me here?

  I had the same problem in the Canada. So here's what I did:

  1. I used Mozilla Firefox and remove all languages (Tools-> Options menu / tab content, click on choose in the section on languages and remove all languages).

  2 go to https://www.hpconnected.com/us/en/. At this point you should not redirected.

  3 click Sign In at the top right of the page. Enter your email and password.

  4 you now receive a message 'Page not found'. On my computer, I was redirected to https://www.hpconnected.com/ca/en/. Now, here's the trick: click on the 'return' button (the arrow in the pointer address pointing to the left) and brings you to the home page where you will see that you are truly connected and it can proceed normally with the site!

  Fred

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• To version download link Android of the Aurora is offline, page not found

  I am trying to download firefox-aurora to my android, but the file is not available. I get page not found... I couldn't find a place where I could report it correctly, so I post here...

  Thank you, this link should work for now: https://ftp.mozilla.org/pub/mozilla.org/mobile/nightly/latest-mozilla-aurora-android/en-US/fennec-30.0a2.en-US.android-arm.apk

• How so avoid during a search, opening a new page or using the mouse-it flips page not found and "cltrda".

  How can I prevent the "page not found and cltrda information opening instead of my search?

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/about:config

• "404 - page not found" error message after downloading and installing Firefox 15

  "404 Page not found" error message after you download the latest version of Firefox.

  It is sometimes the result of a software firewall that protects you against modified applications. Or it could be something else. Can you look at this article and see if it helps: Firefox can not load websites, but can other browsers.

• 650 HPprobook: page not found

  Hi just recently, I uninstalled Crome as I don't really use it but when that I start a blank page opens with the new tab at the top left and I think that its to do with chromium, also after some time when I try to open some of my Windows I get a "page not found" (by bing) now I have not bing or chrome , and the only way around it is to restart my PC any ideas please

  niloc wrote:

  now when I select a tile, I get the page not found

  It is a browser problem and not something that HP can do about windows. Looking on google on how to reset your browser page or homepage?

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• Link to 'help journal online events' event viewer returns a page not found on the technet Web site

  Whenever I click on the link "online help for event log" of event viewer for further help on an error, it returns the page not found on TechNet. Why? If Microsoft has moved the page, or something, why has he not updated the links in this application? I use Windows 8 (upgrade of Windows 7) and all applied Windows updates.

  Well, I spoke with Microsoft Support Thursday and it seems that the Event Viewer online Help is not available yet in Windows 8.

  While I took for them they connected to my system then tried their own with the same results, they then got on the? (could be the resource group... can't remember) who told supporters that on line assistance has not been fully developed for Windows 8 and therefore has not been published!

• Page not found Web galleries

  Hello

  I built my website using the Muse www.bridgendphotography.com using Business Catalyst to host and currently use Smugmug for my client to proofing.

  I bought The Turning Gate CE3 Gallery of customer response to load client proofing directly from LR (latest version cc) galleries.

  However, (several times) I watched the video of Howard Pinskey on loading the web galleries using BC. I entered all my details as I should. The Gallery of the charges but when I try to view it in a browser I'm met with a "Page not found".

  Any suggestions please?

  Concerning

  Dafydd

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

  Hello Dafydd,

  Please go through this post - muse and Adobe Lightroom web galleries where a similar request was addressed.

  Kind regards

  Ankush

• Download failed, null, page not found

  When I entered my redemption code, serial numbers came to the elements and with buttons to download, but when I clicked it to download it, it says page not found, null!  I tried this on as well first and photoshop elements.  Why?  Should I get my money back and forget about it, this isn't a good sign!

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

• Discover the application of electronic reference, page not found saw

  Hello

  I installed the application of reference using case and followed all the steps mentioned in the ToolsAndFramework installation guide to install the reference application.

  The process was completed successfully and when I discover the workbench I can see the Discover tab with management experience, ABC admin console, reports, tools, settings of the search application.

  but when I discover the link http://localhost:8006 / creation check out or http://localhost:8006 / discover

  It is for me the Electronics Logo to discover and the Page not found error.

  I am very new to Oracle short/trade. Kindly help

  The issue is fixed by running the below command and provide you with a new password when it asks.

  %ENDECA_TOOLS_ROOT%/credential_store/bin/manage_credentials.bat add - key IFRC - user admin

• page not found

  After the purchase of my code and get the serial number, I clicked on "Download" and a new tab open with notice "page not found". What should I do next?

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number when prompted.