HP printer assistant choise language

Similar Questions

• HP printer Assistant does not work, script error

  Hi, I have a Photosmart Plus B210 connected wireless to my home network.

  When I try to run the wizard on the printer, I get a script error (only, not open in Notepad), as seen in this post:

  http://support.HP.com/us-en/document/c03640384

  To try to solve this I have done both steps of the solution 1 and 2 in this post (I'm on Vista x 64) and still have the problem.

  In desparation I tried also the recommendation of this post, suggested by Erico:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/script-error/TD-p/1460221

  I have uninstalled/reinstalled all the software and drivers, using the two Uninstall HP once, and using another control panel and still have the problem.

  Note, printing works fine, just cannot run the wizard on the printer. Thank you for your help.

  Hi scooby_doo,

  I found another forum with someone with script errors, I wonder if the solution might work for you.

  HP printer Assistant scipt errors

  I would like to know if it works and if not I will continue to seek a solution for you.

• How to stop the web page of the Center eprint opening automatically when ever I open the hp printer assistant

  I just bought an HP deskjet printer 3525 and after setting up, whenever I open assistant printer scan etc, the e-print web page will automatically open in my browser. I don't use print e & it becomes extremely irritating. I'm about to return to that retailer because of this situation, small but very annoying printer

  Oh Yes... I had the same problem but I forgot to mention... my bad

  the solution is...

  1. Copy the url.json file to another location (Office, perhaps)
  2. Then, change the copied file and save
  3. then copy this file and replace the original one in your file assistant hp
  4. Open the hp printer assistant

  I guess access to modify the refused for security of windows 7

  to stop people or programs make changes to files, particularly in the C drive.

  Remember to keep a backup of the file in case something goes wrong...

• All-in-one Officejet Pro 8610: 8610 Pro HP Printing Assistant has no Scan Options

  Recently installed new software last 8610 and downloaded.  Not install the option to order ink automatically.

  The device uses the ATF feeder to reproduce documents, but did not during the scanning - it assumes that the document is on the glass, while feeder warning tones and the display Panel recognizes that a document is in the charger.  I went to the computer and access to the HP printer Assistant by some other items, but see that I don't have any options for scanning under HP printer Assistant. I ran HP Update for this printer and it says my software is up to date.

  What Miss me?

  Hello

  Thanks for the comments, it seems that, somehow, older drivers are in conflict with the 8610 causes the scan communication error.

  Glad to see everything is working now.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Cannot start "Printer Assistant" Officejet Pro 8600

  The Printer Wizard and my 8600 worked well for over a year.  Now, I can't start "printer Assistant".  This may have been triggered by an 8.1 Win update.  Others on the Discussion Board have said to uninstall all programs, HP, reboot and then download the package "full of features" on the HP site.

  Everything I did.  Installation works very well.  Print, fax and scan all work very well during a test.  A shortcut has been installed on the desktop.  But I can't start the "printer Assistant", either in the upper part of the counter, the Start button, the program file.

  I used the Trouble Shooter to try to find the problem.  Since the troubleshooting I could open "Scan HP - HP Officejet Pro 8600".  From there, I could launch a successful analysis.  But the only way to this page that I found through the Trouble Shooter.

  The Printer Wizard is loaded on my computer: worm 28.0.1315.0 file; 5.16 MB. Last updated on 17/10/12.

  You have any ideas?

  Hi Sticks10,

  Thank you for your reply, I appreciate the clarification. I still think that the patch is a good idea to try.

  If it still does not respond, try the following in the following order:

  1. Uninstall the software. Uninstalling the printer software.
  2. Clean boot the computer. How to perform a boot in Windows.
  3. Disable all antivirus programs. Turn Windows Defender on or off. (This works in Windows 8.1).
  4. Disable the firewall. Turn Windows Firewall on or off. (This works in Windows 8.1).
  5. Create a new user account. Create a user account.
  6. Re-install the software using the printer HP install wizard for Windows.

  Hope this works for you and have a great day!

• HP 6520: 'HP printer Assistant' lives where?

  Installed HP 6520 (Vista SP2)

  Somewhere along the process, I see a great pop-up titled: "HP Photosmart 6520 series: HP printer Assistant".

  But looking at the list of programs under start / HP / HP Photosmart 6520 series

  all I see are:

  Help

  PHotosmart HP 6520 series

  Study of improving product HP

  HP scanner

  Printer Setyup & Software

  Product Support Web site

  Shop supplies

  Uninstall

  Update of IP address

  Wireless print online help

  There is no "HP Photosmart 6520 series: HP printer Assistant" listed.

  So, how do you access this feature?

  Hello

  Installed the printer using the original CD?

  The HP printer Assistant is part of the latest version of the software only.

  If you see an irrelevant tune printer icon in the HP software, delete the software following programs > HP > Photosmart HP 6520.

  Download and install the latest version of the software below and you should be on the right track:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108722-2&cc=us&DLC=en&LC=en&OS=2093&product=5169041&sw_lang=

  Shlomi

• "HP printer Assistant" for HP Officejet 6600 WON 'T run.

  Windows 7 64 bit

  NO error message

  NO changes to the system until after it started then improved then just put update HP firmware

  It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen which allowed you to print, scan, fax, showed levels of ink, etc.

  Now: he comes up with a window of 'Control Panel\Hardware and Sound\Devices and Printers\HP Officejet 6600' that offers you 4 choices and the one that seems to offer printing/scanning, IE. "HP printer aSsistant"... which has no effect when you select.

  IF you right click on "HP printer Assistant" on this screen, it gives you the possibility to make a shortcut.  The shortcut created and has properties where the 'target' is never developed so that you can not even say that he's not trying to run.

  Upgrading of the Roque?

  

  Hello world!

  I called customer service and talked to a nice girl named Stephanie.  She was very helpful and tried exactly the same things I did the week last with the same results...  However, I decided to do another printer to the printer from my last more (410).

  I sincerely advise guys to call directly, and your product is new, you will get a very good support and give advice on what to do.

  We get a new printer and expect us it to work and HP understands that - simply call and your problems are more likely to be resolved here.

  Guys good luck and I hope I never come back on this forum (I got a 2 year warranty on my new printer for $ 1)...

  Ciao!

  Suzie

• the command "hp printer assistant" in the software officejet 7500 is not running.

  When I try to run the Officejet 7500 software, the "HP printer Assistant" command does not run when I click or double-click it.  The other 3 commands run normally. This has happened the first or second time I tried to use the software to check ink levels.  I tried ninstalling and reinstall the software without success.

  The system is Pavilion g6-1A30US laptop, Windows 7 Home Premium.

  Hello

  Uninstall the software by clicking Start > programs > HP > HP Officejet 7500 > Uninstall.

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=4062&product=4083652&sw_lang=

  I think you should see options like scanning and fax options now.

  Shlomi

• HP printer Assistant no longer works

  Because of an update, the HP printing software no longer works.  More important still, I used to have the "Scan to Computer" service activated permanently and cannot determine how I should do now.  By clicking on the "HP printer Assistant" in the HP Officejet 6500 E710n-z app does nothing.

  Hello

  Uninstall your current software by following the uninstall option in the start menu of the printer folder.

  Then download and install the latest version of the software below, which should restore any functionality back:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109384-2&cc=us&DLC=en&LC=en&OS=4062&product=4083977&sw_lang=

  Shlomi

• How to run "HP printer Assistant" in a window at startup?

  "HP printer Assistant" for HP 6520 Series printer opens full screen.  How can you do open in a smaller window, so it does not cover the whole desktop on startup?  Running Windows 7.

  It seems that you are having problems with your printer HP Assistant. What I watched online from various places, including this one:

  http://support.HP.com/us-en/document/bud09546

  There is no button reduce about this software (I would check one of them will look like (_) in the upper right of the software (in general).) If we take the largest part of your screen then there will probably be a matter of what your screen is on the resolution. The resolution that the greatest things appearing on your desktop, if your resolution is set extremely low (or if your monitor is not capable of high resolutions) then it is possible that the software automatically supports a large part of the screen.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Apart from those two things, I doubt that it is a way to change the real default size that the window opens as initially on startup.

  I would like to know if it is useful for you or if there is anything else I can do for you!

  Have a wonderful day!

• Display printer LaserJet M127 language

  Someone has accidentally resets the printing language on our Laserjet M127 of English in an unknown language. We have not been able to resolve the issue based on the assistance provided, as some point in the process, to understand the language on the screen to navigate through the screen of the printer. If we cannot understand the language CSS how reset us to English? For example, how many clicks must we could help every step.

  Thank you!

  Thank you!
  But not the exact solution (I think that I had to go to 6 or 7 clicks), it worked! Thank you!

• Printer change the language of the documents sporadically

  Original title: WHEN you PRINT a DOCUMENT, IT WILL START 3 to 4 PAGES IN ENGLISH LANGUAGE - THEN place you in AFORIEGN ALHABET. HAPPENS ONCE OR TWICE A WEEK.

  on some pages, it will print both English and foreign. I called Canon and they say that it is not the printer.

  Hi c h reynolds,
   
  -For what kind of documents are you facing this problem with? What is a word document or a PDF etc.?
  -You try to print from the document saved on your computer or a Web page?
   
  This problem occurs if the application that you want to print has been set in another language.
  Look for the same thing to solve this problem.

• OfficeJet Pro 8610: Printer prints in different languages via e-Print

  A strange thing happened.

  I sent - by email to the email address of the printer from my parents - an Excel in Dutch.
  The printer received perfectly and immediately have printed... in English!

  What happened to anyone before?

  Oh so this is only the date column and not the entire contents, it makes a major difference.

  HP ePrint service does not support the formatting in the excel table.

  Either change setting cells shaped like a text field, and then type the date.

  I can also save me the Excel sheet in PDF format and send the PDF file to avoid this kind of format changes.

  Shlomi

• Unable to access the Ultiboard of Multisim part prints Assistant

  I have re-installed the design of circuits Suite on a new PC (I got active v10.1.372 on the old PC), I have 10.1 on the new PC. I made an EWPRJ file with all made previously. I added each party, through selection, to the Ultiboard database. When you try to bind the new parts of Multisim to prints of not in the Ultiboard database, the prints do not appear for selection. Is there a work around?

  Thank you, Tod

  Hi Tod,

  I have a solution for you. During the creation of components, choose a comparable space in the master database. When you transfer the design to Ultiboard, you can select the form and go to tools-> change the shape. This will allow you to choose the correct form.

  I hope this helps.

• HP Photosmart 6520 "printer assistant" will not work

  I installed the software of the printer Photosmart 6520 without error during installation. When I double click the icon of HP Photosmart 6520 series on my desktop to run the 'printer' Wizard nothing happens. Other than the printer works very well. I'm running Windows XP, one a computer HP Pavilion 7360. I've uninstalled and reinstalled the software several times from the CD supplied and downloaded also from the HP site with the same results.  I was wondering if this works with Windows XP?  I have loaded the software on my laptop HP G71-340 under Windows 7 Home Premium and the "printer" Wizard works fine. Any help would be appreciated.

  Hello world

  Root cause:

  A default program to open this file has been correctly defined.

  Download and run the file below. Let me know what you find?

  Update of file association