HP 6520: 'HP printer Assistant' lives where?

Similar Questions

• "HP printer Assistant" for HP Officejet 6600 WON 'T run.

  Windows 7 64 bit

  NO error message

  NO changes to the system until after it started then improved then just put update HP firmware

  It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen which allowed you to print, scan, fax, showed levels of ink, etc.

  Now: he comes up with a window of 'Control Panel\Hardware and Sound\Devices and Printers\HP Officejet 6600' that offers you 4 choices and the one that seems to offer printing/scanning, IE. "HP printer aSsistant"... which has no effect when you select.

  IF you right click on "HP printer Assistant" on this screen, it gives you the possibility to make a shortcut.  The shortcut created and has properties where the 'target' is never developed so that you can not even say that he's not trying to run.

  Upgrading of the Roque?

  

  Hello world!

  I called customer service and talked to a nice girl named Stephanie.  She was very helpful and tried exactly the same things I did the week last with the same results...  However, I decided to do another printer to the printer from my last more (410).

  I sincerely advise guys to call directly, and your product is new, you will get a very good support and give advice on what to do.

  We get a new printer and expect us it to work and HP understands that - simply call and your problems are more likely to be resolved here.

  Guys good luck and I hope I never come back on this forum (I got a 2 year warranty on my new printer for $ 1)...

  Ciao!

  Suzie

• How to run "HP printer Assistant" in a window at startup?

  "HP printer Assistant" for HP 6520 Series printer opens full screen.  How can you do open in a smaller window, so it does not cover the whole desktop on startup?  Running Windows 7.

  It seems that you are having problems with your printer HP Assistant. What I watched online from various places, including this one:

  http://support.HP.com/us-en/document/bud09546

  There is no button reduce about this software (I would check one of them will look like (_) in the upper right of the software (in general).) If we take the largest part of your screen then there will probably be a matter of what your screen is on the resolution. The resolution that the greatest things appearing on your desktop, if your resolution is set extremely low (or if your monitor is not capable of high resolutions) then it is possible that the software automatically supports a large part of the screen.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Apart from those two things, I doubt that it is a way to change the real default size that the window opens as initially on startup.

  I would like to know if it is useful for you or if there is anything else I can do for you!

  Have a wonderful day!

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.

• HP printer Assistant does not work, script error

  Hi, I have a Photosmart Plus B210 connected wireless to my home network.

  When I try to run the wizard on the printer, I get a script error (only, not open in Notepad), as seen in this post:

  http://support.HP.com/us-en/document/c03640384

  To try to solve this I have done both steps of the solution 1 and 2 in this post (I'm on Vista x 64) and still have the problem.

  In desparation I tried also the recommendation of this post, suggested by Erico:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/script-error/TD-p/1460221

  I have uninstalled/reinstalled all the software and drivers, using the two Uninstall HP once, and using another control panel and still have the problem.

  Note, printing works fine, just cannot run the wizard on the printer. Thank you for your help.

  Hi scooby_doo,

  I found another forum with someone with script errors, I wonder if the solution might work for you.

  HP printer Assistant scipt errors

  I would like to know if it works and if not I will continue to seek a solution for you.

• How to stop the web page of the Center eprint opening automatically when ever I open the hp printer assistant

  I just bought an HP deskjet printer 3525 and after setting up, whenever I open assistant printer scan etc, the e-print web page will automatically open in my browser. I don't use print e & it becomes extremely irritating. I'm about to return to that retailer because of this situation, small but very annoying printer

  Oh Yes... I had the same problem but I forgot to mention... my bad

  the solution is...

  1. Copy the url.json file to another location (Office, perhaps)
  2. Then, change the copied file and save
  3. then copy this file and replace the original one in your file assistant hp
  4. Open the hp printer assistant

  I guess access to modify the refused for security of windows 7

  to stop people or programs make changes to files, particularly in the C drive.

  Remember to keep a backup of the file in case something goes wrong...

• All-in-one Officejet Pro 8610: 8610 Pro HP Printing Assistant has no Scan Options

  Recently installed new software last 8610 and downloaded.  Not install the option to order ink automatically.

  The device uses the ATF feeder to reproduce documents, but did not during the scanning - it assumes that the document is on the glass, while feeder warning tones and the display Panel recognizes that a document is in the charger.  I went to the computer and access to the HP printer Assistant by some other items, but see that I don't have any options for scanning under HP printer Assistant. I ran HP Update for this printer and it says my software is up to date.

  What Miss me?

  Hello

  Thanks for the comments, it seems that, somehow, older drivers are in conflict with the 8610 causes the scan communication error.

  Glad to see everything is working now.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Cannot start "Printer Assistant" Officejet Pro 8600

  The Printer Wizard and my 8600 worked well for over a year.  Now, I can't start "printer Assistant".  This may have been triggered by an 8.1 Win update.  Others on the Discussion Board have said to uninstall all programs, HP, reboot and then download the package "full of features" on the HP site.

  Everything I did.  Installation works very well.  Print, fax and scan all work very well during a test.  A shortcut has been installed on the desktop.  But I can't start the "printer Assistant", either in the upper part of the counter, the Start button, the program file.

  I used the Trouble Shooter to try to find the problem.  Since the troubleshooting I could open "Scan HP - HP Officejet Pro 8600".  From there, I could launch a successful analysis.  But the only way to this page that I found through the Trouble Shooter.

  The Printer Wizard is loaded on my computer: worm 28.0.1315.0 file; 5.16 MB. Last updated on 17/10/12.

  You have any ideas?

  Hi Sticks10,

  Thank you for your reply, I appreciate the clarification. I still think that the patch is a good idea to try.

  If it still does not respond, try the following in the following order:

  1. Uninstall the software. Uninstalling the printer software.
  2. Clean boot the computer. How to perform a boot in Windows.
  3. Disable all antivirus programs. Turn Windows Defender on or off. (This works in Windows 8.1).
  4. Disable the firewall. Turn Windows Firewall on or off. (This works in Windows 8.1).
  5. Create a new user account. Create a user account.
  6. Re-install the software using the printer HP install wizard for Windows.

  Hope this works for you and have a great day!

• HP printer assistant choise language

  Hi, need help I have printer HP deskjet 3525 and windows 8.1 ENG, the installation of the printer I have HP printer assistant language ENG, I need language Slovakia for printer assistant

  How to set up assistant language printer HP for the Slovakia

  THX

  solved, it should overwrite the file in the program directory of the language that I want the English language specific file localize_1033.json

• the command "hp printer assistant" in the software officejet 7500 is not running.

  When I try to run the Officejet 7500 software, the "HP printer Assistant" command does not run when I click or double-click it.  The other 3 commands run normally. This has happened the first or second time I tried to use the software to check ink levels.  I tried ninstalling and reinstall the software without success.

  The system is Pavilion g6-1A30US laptop, Windows 7 Home Premium.

  Hello

  Uninstall the software by clicking Start > programs > HP > HP Officejet 7500 > Uninstall.

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=4062&product=4083652&sw_lang=

  I think you should see options like scanning and fax options now.

  Shlomi

• HP printer Assistant no longer works

  Because of an update, the HP printing software no longer works.  More important still, I used to have the "Scan to Computer" service activated permanently and cannot determine how I should do now.  By clicking on the "HP printer Assistant" in the HP Officejet 6500 E710n-z app does nothing.

  Hello

  Uninstall your current software by following the uninstall option in the start menu of the printer folder.

  Then download and install the latest version of the software below, which should restore any functionality back:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109384-2&cc=us&DLC=en&LC=en&OS=4062&product=4083977&sw_lang=

  Shlomi

• HP Photosmart 6520 "printer assistant" will not work

  I installed the software of the printer Photosmart 6520 without error during installation. When I double click the icon of HP Photosmart 6520 series on my desktop to run the 'printer' Wizard nothing happens. Other than the printer works very well. I'm running Windows XP, one a computer HP Pavilion 7360. I've uninstalled and reinstalled the software several times from the CD supplied and downloaded also from the HP site with the same results.  I was wondering if this works with Windows XP?  I have loaded the software on my laptop HP G71-340 under Windows 7 Home Premium and the "printer" Wizard works fine. Any help would be appreciated.

  Hello world

  Root cause:

  A default program to open this file has been correctly defined.

  Download and run the file below. Let me know what you find?

  Update of file association

• 6520 printer Assistant

  Just installed a using 6520 win 8.1 64bits dowlnoaded 6520 soaftware disc and line printer assitantt appeara of icon on my desktop but when I click on open nothing happens

  What can I doi to get this working?

  f

  Hello ftwand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems with the Printer Wizard.  I would like to help.

  I recommend to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• 6520 cannot print envelopes

  I just bought an eprint 6520. I don't have a PC or a Mac, only an iPhone and the iPad. I can print from the ePrint app, but I can not configure the printer to print envelopes. How to set the printer to make the envelopes (or other pages in size, photos) of the printer itself or through my iPad?

  It's actually very easy. I did load the ePrint and remote apps AiO and mating with the 6520. But, none of these applications would not provide paper envelope in option. So, after having unloaded the printer paper and put some envelopes in the bottom tray I just clicked 'print' of the Pages App where I created my list of the envelope. I could only form 6-8 envelopes into the tray at a time, but he did print correctly.

• Printed troubleshooting information - where it says 'False' if I uninstalled all the false information and that most of the firefox bookmarks would stop crashing - I have

  I printed the five pages of ~ problems shooting information and the report of health of Firefox - safe you a fall - but you does not fall down so often as I / E-, I do not use that now
  815 problem Favorites and a great many Personae - if I remove those will only help - you see I'm chickening re-creation of Firefox, I wonder if I can do something at my little chicken self - what is it please - that "overload" Firefox - I like the browser - that and won't go back to / E also what else can I I seek to remove - for Firefox runs without problem I greeted convenience store now what is happening

  Oh yes, I've been exactly where you are, you go to uninstall something but then u think I have use and get all nostalgic, it's normal
  It of just a phase, when you realize u really don't use them, you will understand
  Bookmarks have far less to do with offset
  use bookmarks and xmarks called addon, it synchronizes all the stuff for his break so I then for 3 years and I like 2000 Favorites
  Reseting Firefox will not remove your plugin, addon, and themes
  All of your bookmarks, password, remnants of history
  Happy to help u