iPhone 6 Plus with IOS9 impossible to restore back to the top with iTunes on Windows Vista 12.1.2. 5 years of data lost?
Hi guys
I was really grateful for any help on this, I am really at my wits end.
So my iPhone 6 more than 128 GB camera packed a few days ago. I made an appointment to repair/replace the Genius Bar and prior to the appointment back up everything on my phone to itunes on my Windows Vista laptop. All 100 + GB of it. I will mention at this stage, nothing has been saved to icloud (silly me!)
Apple is good enough to replace my iPhone as it was still under warranty. I plugged my new iPhone forward to my laptop to restore to the last backup, in order to receive a message in order to synchronize with the iPhone I have to update iTunes to the latest version. No problem, I thought. I checked for the last download iTunes to receive a message that iTunes is up to date... At this point, I started to panic. So I tried to download the latest version of iTunes from Apple website only to be told that iTunes 12.3 works only with Windows 7 or later... AAAHHHHHHH!
I literally my life on this phone. 5 years worth of data just gone. I can't downgrade the IOS on the phone, and I can't update iTunes on my laptop.
Is there any fine people out there with a solution to this?
Thank you in advance.
Mark
Brand...
I hate to be the bearer of bad news, but the minimum requirement is Windows 7 and iTunes 12.3.3...
See: system requirements here > http://www.apple.com/lae/iphone-6/specs/
Tags: iPhone
Similar Questions
-
Verizon is telling me to do this because I have weird battery problems. They say it's maybe because I'm updating my iphone in wifi instead of using itunes plugged into a computer.
Thank you!
Yes, you can backup your device in iTunes and restore this backup. For detailed instructions, see this support document. Restore your device from an iCloud or iTunes backup - Apple Support
-
Error with iTunes in Windows 10
So I have a strange problem.
What is happening is iTunes opens (perhaps more slowly than normal? Unconfirmed), but will enter a strange state. This will be repeated at random, sometimes when the program starts immediately, other times, a few minutes after. It also leaves this State at random, often after a few minutes, but only for a millisecond. Rarely, it will leave for a few minutes. The only way that seems reliable to enter this State is to plug in my iPhone. The only way to leave he must have the Task Manager kill the program, and then reopen it.
In this State, it will not meet order entries and seems to freeze, but Windows does not recognize it as an error of gel. It will also continue to play any song that was playing before its entry into the State, but not go to the next song, when it ends (it will be however if she leaves the State). If I am interested in another application, although in that State, I can hover over the iTunes toolbar icon and see the screen, but I can't go to iTunes.
I'm sure it's a question of iTunes, as all my other applications work fine. Reinstalling does not solve the problem but (restart the computer between uninstall and reinstall). I'm kind of at a loss because I have no idea how to solve this problem.
Details:
iTunes Version: 12.4.1.6
OS: Windows 10
Hardware: ASUS GL551
See excellent iTunes from turingtest2 for Windows troubleshooting guide at:
Troubleshooting problems with iTunes for Windows updates
General advice for troubleshooting when iTunes is unable to properly install (and reinstall or repair it does not) are to remove not only iTunes, but ALL the components, restart, remove the target installation files and reinstall.
-
I want to restore my hp desktop computer that is running windows vista edition Home premium
I want to restore my hp desktop computer that is running windows vista edition Home premium, but I don't have the cd and when I try it files through the windows there not a correct restore date. can someone help me?
Hello
You're confused system recovery and system restore.
System Restore makes the settings from your computer to an earlier date; It will not reinstall the operating system.
System recovery reinstalls the operating system how much you bought your machine; as for the new State.
"Recover Windows Vista operating system using HP Recovery"
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703
You can reinstall by the HP Recovery Manager if your computer is still running or by pressing F11 at startup.
You can also make your own recovery discs.
All these information are the included HP link.
For the HP Recovery Manager.
The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:See you soon.
-
Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?
rivercitylady,
Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
Go to the Microsoft Download Center and search for the number of the update has failed. Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would also like to use Adobe .dng files in files. VISTA has native free codecs for the same. Please season a solution?
original title: Micorsoft Camera Raw CodecAs far as I lnow... the following codec pack is
the most current available from Microsoft.Microsoft Camera Codec Pack
http://www.Microsoft.com/download/en/details.aspx?ID=26829
(Windows 7, Windows Vista Service Pack 2)
This package will allow RAW supported
camera files visible in Windows ExplorerThe following retail software is not Microsoft
but maybe worth a visit:FastPictureViewer Codec Pack
http://www.FastPictureViewer.com/codecs/ -
I have a bluetooth headset jawbone I would use a microphone with my PC (Windows Vista Home Premium). I paired the jaw with my computer. Unfortunately, it is not recognized as a microphone by my computer. Any suggestions? I would like to used to make orders of recognition on my computer. Thank you in advance for advice.
Hi Hayekk,
There are several things to try:
· Remove and then reinstall the device:
1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.
2 Select the device that is not working, and then click Remove.
3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.
4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.
5. follow the remaining instructions in the wizard.
· Make sure that the device is on and that the batteries should be replaced.
· Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.
· The unit may be out of range of your computer, or too close. Try to move closer or a little further away from your computer.
For your reference:
The problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesSet up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-deviceThe Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected when you click the item
http://support.Microsoft.com/kb/960531/en-usI hope this helps.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
How to password lock a file with documents in windows vista
How to password lock a file with documents in windows vista?
Hello
You cannot use the password to protect the files in Windows Vista. However, you can encrypt the file.
Encryption is a way to enhance the security of a message or file by scrambling the contents so that it can be read only by someone who has the appropriate encryption key to decrypt it.
For more information you can check the link below: can I protect files or folders with a password? : http://windows.microsoft.com/en-US/windows-vista/Can-I-protect-files-or-folders-with-a-password
When should I encrypt files and folders? : http://windows.microsoft.com/en-US/windows-vista/When-should-I-encrypt-files-and-folders
-
After getting my laptop to factory State, I ran the update of the window and got stuck to the update of security for Windows Vista (KB973768). The error code is 80073715. The update does not always settle anything I tried (reboot, download directly from the website of window, run the diagnostic window and solve problems). If anyone can help me, I really appreciate it.
ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 80073715
The identity of the manifests are identical, but their content is different
In a Word, there is a problem with component maintenance (EC).
The information stored on the content of the file does not match what is present in Windows\winsxs.
Try another attempt to update. If/when it breaks down, thanks for posting the * last * 50 or if WindowsUpdate.log lines in your answer:
How to read the Windowsupdate.log file
http://support.Microsoft.com/kb/902093
In addition, please include the edition of Windows and the Service Pack level of operating system-
For Vista \Win7, * right * click the computer on the desktop or the Start Menu, and then select Properties. The information is under "Windows edition".
04/09 / 1107:46: 58 pm
-
iTunes CD & DVD registry settings works only with 32-bit Windows Vista - Help!
Since the update to iTunes 9.0, everytime I open iTunes, I get the error message:
Caveat! The registry settings used by iTunes for importing and burning CD DVD drivers & lack. This can occur as a result of installing other CD burning software. Please reinstall iTunes. "Device filter entries exist to somehow change how a device works. If you encounter problems using CD, follow these steps to temporarily disable other third-party optical drive software entries.
It says that I have to reinstall iTunes. I click OK and it goes to open iTunes. Everything works normally except when I go to burn to a CD. When I click on burn, he says: "disk not found... recorder. "and will not burn the discs.
I contacted Apple, and we tried to reinstall the CD/DVD from GEAR Software drivers. I also tried to uninstall and reinstall iTunes.Apple technology gave me a link to try with instructions for fixing Windows registry info. I followed that, thanks to step 10, but can go no further because I can not find the buttons, they are askking me to click. The link he gave me is:
iTunes for Windows Vista or Windows 7: CD troubleshooting problems caused by device filters
Click on the link above or copy and paste the following address into your Web browser to view the corresponding article: http://support.apple.com/kb/HT2615?viewlocale=en_US>
Help?
Hi Behnke
What other burning software CD do you have on the system? I suggest you to remove for this test. And install it again after the test.
Try these methods step by step to help resolve your problem:
Step 1: Uninstall iTunes completely with Windows Installer Cleanup Utility.
Download windows install Cleanup utility and clean all traces of Itunes on your system. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on. Download here.
1. Save the Windows Installer Cleanup Utility package on your computer
2. right click on the Windows Installer Cleanup Utility and run as administrator
3. follow you prompt in the installation wizard.
4. Once completed the installation, click on the Start button.
5. click on all programs. Click on Windows Installer CleanUp.
6. click on iTunes (if active list). Click on Remove. Click on OK. Click exit
Step 2: uninstall and reinstall Itunes.
NOTE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Step 3: Configure iTunes as the default player on your system.
Step 4: Solve the problem of CD/DVD
To resolve this issue automatically, click the fix this problem link. Click run in the file download dialog box, and then follow the steps in this wizard.
Solve this problem
Microsoft Fix it 50028Or you can manually fix KB314060.
See also: http://discussions.apple.com/thread.jspa?threadID=1535328
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?
A question = a post in these Forums.
Answered in another Thread.
Mick Murphy - Microsoft partner
-
iPhone 6 Plus with iOS 10.0.2 connectivity
Since I upgraded my iPhone 6 more the new iOS 10.0.2, my PC couldn't recognize him as DCIM if I can still sync on iTunes. I can no longer access the content (images, videos) on my PC.
See the information contained in this thing of ASC. iOS device is not showing in iTunes for Windows
Understand that you cannot see the device in Windows, unless there are pictures on the Filmstrip.
-
Can not load Iphone 6 Plus with Yoga2Pro
Comments, said the port USB 2 was a port ' always on ', but I can't load my Iphone 6 more if the computer is in standby or off.
I can load only if the computer is on and not asleep. I tried the various "power management" parameters, but it does make a difference. Any help would be appreciated.
James
Follow-up...
I'm still rebuilding my Y2P, but try this:
-Go to the start screen
-Start typing "energy Manager" and select it.
-From the application (open on the desktop), expand the interface (button at the top right of the gauge).
-Select the tab "settings".
-Flip "on" option "load USB".
-Put your Y2P standby and then try to charge your phone.
-2nd test, completely shut down your computer and try to charge your phone.
The two tests work perfectly on my my Samsung Galaxy S3 of load Y2P.
I hope this helps.
Kind regards.
-
iPhone App-Sync with iTunes problem
Today, I downloaded a new iPhone App in
iTunes [12.4.3.1]
on a Macbook Pro [10.11.6]
who has several granted previously iPhone Apps, all updated and everything already works on my iPhone 5 [9.3.5] (Firmware 10.01.00).
Recently, via USB, attempts to sync-ing my iPhone work, however, the iPhone settings / window Apps in iTunes is completely gray, including "checked for the installation of new applications" just below the list of applications.
Download of news today is sitting there in the list with its play button "install", and with everything else, is not interactive. "
After reading a full restore of the iPhone has worked for others, I restored the iPhone with iTunes by selecting the option traded using my "iPhone name.
Now, all applications are absent from the iPhone and is not able to be loaded as they all remain still grayed out in iTunes under the iPhone settings / (summary, Apps, music / etc).
However, as it was previously, I'm still able to select manually in the music , the books and pictures, etc., and have such precisely Sync-ed with the iPhone currently.
How an update iTunes and OSX are incompatible for Sync-ing updated iPhone apps to iPhone updated via USB?
Help, please. Thank you.
The first thing that comes to mind is a problem to Apple ID.
Did you use the same Apple ID to purchase each of your applications, books and music?
-
I recently bought the iphone is. came with ios 9.3. When it is connected to itunes, it will only display to restore to save or set as new iphone. I already saved before swapping of iphones, I saved it anyway. but still the same problem. I have updated to ios 9.3.1. and still has a problem. iTunes is to its latest version. anyone else having this problem?
Hi not Tavo,.
Congratulations on the purchase of your new iPhone SE! I understand that you are having problems syncing your new iPhone with iTunes on your PC. When you supported your old iPhone originally, you do it via iCloud or iTunes? I suggest you set up your new iPhone, updated to iOS 9.3.1 and then synchronize with iTunes. When you enable iCloud on your new iPhone, you'll be able to see your contacts, calendars, etc. I would add a few resources below for you:
How to clear your iOS device and then set up as a new device or restore from backups
Erase your device
Erase content and settings will remove all data from your device, including songs, videos, contacts, photos, calendar information, and nothing else. All device settings are restored to their factory condition.
To remove all settings and information from your device, tap Settings > general > reset > erase all content and settings.
Set up your device as a new device
After your device is cleared, you should see the following screen:
Follow the steps to complete the installation wizard. When you are prompted, select "set up as new iPhone." Then tap Next.
Ignore the Apple sign-in ID, in which case the initial problem was related to any of your content in iCloud.
After setting up as new, you will need to enter your password for Visual Voicemail for iPhone (on the carriers that support Visual voice mail). If you have forgotten your password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory setting. Try again what you were trying when you first found the question to determine if erasing and setting up a new device solves the problem. Contents of the device could have caused the unexpected behavior.
- If the problem persists, you can contact the Support technique Apple.
- If the problem is resolved, a type of synchronization of content both on the device. For example, if you had a problem reading music, add songs to iTunes and confirm that they will play. If your contacts have not been loaded successfully, you can add contacts to the rear. After each sync, test to see if the problem is back.
Sync your iPhone, iPad or iPod touch with iTunes via USB
Take care
Maybe you are looking for
-
Want to 750-209: how to connect an old sound system to a new computer
I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need
-
My Deskjet 970CXI only prints in cyan and not black. I tried all the solutions opted in this forum (cleaning, reset) but nothing helps. The print of the testpage is perfect, cyan and black.
-
I just download El Capitan to my IMac mid 2007. I can't find my application. Where is he? How can I get? Thank you
-
I put my machine running windows update last night, he installed SP2 from one day to the next. This morning I met with my usual logon screen. On logging into Vista asked for new authorization, I entered my product key on the back of the windows folde
-
Windows mail files lost while fixing the computer
32 bit, Vista w/service Pack2 computer got hungup on something in the background and would not work for 2 days has given the guys computer who has got it to work, but at the same time lost all files in Windows mail Contacts are the only element that