HP ProBook 455 G1 APU overheat?

Similar Questions

• HP Probook 455 g1: HP Probook 455 g1 - A4 to A10 upgrade?

  Hello

  I recently bought a HP Probook 455 g1, running an AMD A4 - 4300M.  Would it not possible/feasible to upgrade at A10 - 5750M?  I heard it can use the same socket, but may have problems...?  Or I will have to settle a few flavors of A8?

  Thanks in advance,

  John Paul Moran

  APU only known compatible and listed as options in your series of laptop models are as follows.

  Source reference: Maintenance & Service Guide (see page 20 in the guide)

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5359415&docid=emr_na-c03765776&docLocale=en_US

  Models of AMD:

  ● A8 - 5550M, 3.1-GHz/2.1-GHz, 4 MB of cache L2, HD graphics 8550 G 713551-001

  ● A8 - 4500M, 2.8-GHz/1.9-GHz, 4 MB of cache L2, HD graphics 7640 G 683048-001

  ● A6 - 5350M, 3.5-GHz/2.9-GHz, 1 MB L2 cache, HD graphics 8450 G 713550-001

  ● A6 - 4400M, 3.2-GHz/2.7-GHz, 1 MB L2 cache, HD graphics 7520 G 683047-001

  ● A4 - 5150M, 3.3-GHz/2.7-GHz, 1 MB L2 cache, HD graphics 8350 G 713549-001

  ● A4 - 4300M, 3.0-GHz/2.5-GHz, 1 MB L2 cache, HD graphics 7420 G 685990-001

  That is why the 10 - 5750M that we not ask a possible choice for upgrading. There is no particular BIOS for this APU support.

• ProBook 455 G2: Unknown device PCI\VEN_1022 & DEV_1423 & SUBSYS_14231022 & REV_00

  Hello

  Have unknown device: PCI\VEN_1022 & DEV_1423 & SUBSYS_14231022 & REV_00

  What means K15.3 AMD - IOMMU v2

  I autodetectutility.exe use - but it does not help

  After that uninstall catalist and install sp72887. Unknown device to remain

  HP ProBook 455 G2

  What can I do?

  Hello:

  You will probably need to manually install the driver.

  I know that is the one you need, because if you look at the contents of the driver file folder you can see that this driver has support for the hardware ID you have posted.

  [AMDIOV. NTamd64]
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1002 & DEV_5A23
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1419
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1577
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1423
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1437
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1449
  % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1611

  Sometimes the automatic installer does not install the driver, so you must outwit the PC.

  Go to Device Manager and click on the device IOMMU requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp67924.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

• upgrade for HP probook 455 laptop screen full HD

  Hello
  
  I have a probook 455 and I wanted to know is there any screen full hd or hd + corresponding to this model?
  
  I think my lcd is like this:
  http://www.LaptopScreen.com/English/model/HP-Compaq/ProBook~455~G1 ~ (F2P93UT).
  
  and I read this link:
  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/HP-ProBook-4540s-upgrade-laptop-screen...
  
  I want to know if other hp LCDs or other brands can be used? Help me if you know the full hd or hd + lcd model.
  in fact, I am not satisfied with contrast of 455

  Yes and no.

  Not as long as the computer and the components are designed to best suite with eachother. So manufacturers will not support using incompatible parts if custamization is accepted.

  Yes because there are technicians who can mix and match components but the combination must look and regular maintenance. I would not advise this as it can be found in failutes and questions.

  Workaround would be to buy a monitor (ecternal) HD and plug it in. There are n number of options in the HD monitor of your choice.

• ProBook 455 L3P93ES G2 #ABZ: installation without end and return the video driver AMD R6 and R7 M260DX and stop on a black screen system

  Hello, I'm in trouble with this problem. If anyone can help me, I appreciate a lot. Thank you in advance.

  Laptop: HP ProBook 455 G2 L3P93ES #ABZ

  Problem: windows back AMD R6 and R7 video driver to the old version of windows update install. Return process the screen come black and stop here.

  Procedure, I followed:

  1. updating the bios with the latest version (M75_0141.bin)
  2. new facility created by HP Cloud recovery customer USB boot disk
  3. Install the drivers and programs of the HPSoftwareSetup.exe util
  4. Connect the network cable and upgrade the drivers and the HP Support tool programs assistant
  5. Install the software
  6. Join the Organization's domain
  7. Force Windows Update to version 1607 by the upgrade of Windows tool
  8. Windows Update

  Item 4, at random, windows update 10 and return the driver from these versions:

  • 15.201.1301.0
  • 15.201.2301.0
  • 15.300.1025.1001

  I don't have install the AMD specific video driver (Radeon Crimson Edition 16.7.3 software) or drivers from the Chipset AMD (Crimson edition 16.7.3) because when I try in a previous installation of test I had the same problems

  To restore the display I have to start windows in safe mode and disable the two R6 and R7 display cards, and then restart. After that I can reactivate the cards one time.

  This device first question first time I install Windows 10 the year in August (Yes, after a few days Windows 10 out)

  Any help that will be much appreciate because I have to reinstall on 20 laptops for the school to start the day.

  Thank you

  ScuolaCarovana

  Hello;
  
  Let me welcome you on the HP forums!
  
  From your description, it seems that, after you have installed the correct video driver for your ProBook (15.201.1301) AMD, Windows Update is then by installing a different driver on top of that, right version?

  If this is the case, you must follow these instructions to STOP Windows update update drivers: how stop Windows 10 to update automatically the device drivers - windows Windows 10-10

  Once you do this, you should not see updates to the pilot after that.

  Good luck

• ProBook 455 G2: Unknown device (ACPI\HPQ6007)

  Hello

  I have an unknown device in Device Manager for my 64 bit of Windows 7. Can someone help me which driver needs to be installed?

  I have notebook Probook 455 G2.

  I can see the image below in the Device Manager:

  

  Thanks & br,

  Halacs

  Hello

  Should be HP 3D DriveGuard on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_132986_1&swEnvOid=4059

  Kind regards

  DP - K

• HP Probook 455 G1: Driver HP Probook 455 G1 wireless

  I have a HP Probook 455 G1 laptop running Windows 7 Ultimate 64 x I downloaded the drivers wireless from the other computer from hp site. When I clicked on the installation, I clicked next then accept... when I gt to the part Setup (loading thing) he installed to complete and just you quit the installer. no finish or restart the computer just came out. and the driver will not work. I have download all 3 of them and none would work, all are the same. Here is the link where I downloaded the drivers from: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5359416&swLangOid=8&swEnvOid=4059

  Help! I'm using linux now that has already installed the drivers.

  Ok:

  Try this...

  Go in Device Manager, click on the Ralink RT3290 the problem wireless card.

  Then click on the driver tab click on Update driver.

  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66089.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

• HP Probook 455 G1: Left mouse button is released

  I used my HP Probook 455 G1 for about 6 months. It has never been damaged or needed repairs until today, the left mouse click below the touchpad is completely detached. It is not broken or broken in some way, and I think that everything I have domechanism together - that is more easily said than done.  I am aware that my warranty is still valid, however, I am in school and do not have time to wait two weeks to get it repaired just before my exams! Any help is appreciated.   Attatched image shows the button (on the left), the parts of the mechanism and the gaping hole in my machine (right).

  According to the message that you have recently published, I want to confirm that it is a hardware problem and I highly recommend you Contact HP support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Creating image of HDD on the ProBook 455 G1

  P/N: C9D97AV (HP ProBook 455 G1)

  Operating system preinstalled: FreeDOS

  Operating system: Windows 8.1

  I recently bought a HP ProBook 455 G1 that came with FreeDOS. I installed windows 8.1 on it, and I like to keep an image of system of it to shorten any attempt of recovery, that I might have to do. Is it possible to remove the HDD without voiding the warranty? I want to place it on another pc to clone HARD drive. If it void the warranty, what else is there to clone my HARD drive to an external destination (USB portable HARD drive)?

  Thank you in advance.

  Ekder wrote:

  P/N: C9D97AV (HP ProBook 455 G1)

  Operating system preinstalled: FreeDOS

  Operating system: Windows 8.1

  I recently bought a HP ProBook 455 G1 that came with FreeDOS. I installed windows 8.1 on it, and I like to keep an image of system of it to shorten any attempt of recovery, that I might have to do. Is it possible to remove the HDD without voiding the warranty? I want to place it on another pc to clone HARD drive. If it void the warranty, what else is there to clone my HARD drive to an external destination (USB portable HARD drive)?

  Thank you in advance.

  Remove the HARD drive and put temporarily in a desktop computer to clone it will not violate the warranty.

  Another method is to use a software product by one of the few companies to achieve. The Paragon Software makes software called Backup & Recovery 15 House. He will do exactly what you ask in your thread ann drive external hard usb.

  There are also free available software products that will do the same thing but not as reliabkly as a paid version of cloning.

  http://www.techsupportalert.com/best-free-drive-cloning-software.htm

  http://www.tomsguide.com/answers/ID-2028061/free-drive-cloning-software.html

  ON one of the first times that I have upgraded to an SSD in either of my laptops, I bought a Crucial SSD as a migration kit. It was delivered to withn a usb cable software SSD and Acorn of cloning.  It was the most reliable method I've found to date.

  

  WARNING: Paragon Software provide me with copies of all their software for my use free reviewer and review.

• ProBook 455 G1: Replacement AMD A4 4300 m with something faster

  Good evening everyone,

  I would like to know if it is possible to replace AMD A4 4300 m with something more powerful and if so, what would be the fastest CPU compatible.
  Have not tried if my A4 is welded, it is still under warranty for 2 more months.

  Some of my ProBook features:
  motherboard: 194th HP  (requested by aida64)
  CPU: AMD A4 4300 m (http://www.cpu-world.com/CPUs/Bulldozer/AMD-A4-Series%20A4-4300M.html)
             Socket FS1 (FS1r2)
  Graphics: ATI HD8750m 2 GB with dedicated dual graphics card
  RAM: 4 GB

  I was thinking something like this: AMD A10 5750 m

  (http://www.cpu-world.com/CPUs/Bulldozer/AMD-A10-Series%20A10-5750M%20-%20AM5750DEC44HL.html)
  It has the same FS1r2.

  There was a G1 455 ProBook with this particular A10 and dedicated graphics card, I have, but I have not found the name of motherboards...

  I thank very you much for all the simple tips and information.

  It's the top processor of the page:

  AMD A8 - 5550M, 35W, Quad Cores, 3.1 GHz/2.1 GHz 4 MB L2 cache/NVS 8550 G

  Here is the Manual:

  Manual

  See p. 81 for the replacement of the processor. Your AMD integrated graphics will 7420G to 8550G and switchable dedicated video chip will remain the same. The A10 - 5750M has the same socket and it MIGHT work, but we can't really say. We know that the APU types listed in manual work will BE for you.

  Before I did the upgrade of the processor that I might consider 8 GB of RAM and an SSD, while AMD processors tend to be a fairly reasonable price compared to Intel.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 455 G2: updating Win 7 to win 8.1

  Hello. Recently became proud owner of HP Probook. It has Win 7 Professional 64 installed. But the information has indicated that "available through Windows 8.1 Pro download rights. This reads like the wrong way as my HP laptop came with Win 7 Pro already running?
  I also received 2 discs win Pro 8.1 and App and Driver recovery DVD. My questions are: 1: if I switch to 8.1 win I will lose programs delivered HP pre-installed with my HP laptop? 2: after installation of the 8.1 Win will be I need a permit to run this and if so where it will be? Thank you in anticipation of answers :-)

  Buz1 wrote:
  Thank you once again, Erico

• HP probook 455 G1: my fingerprint doesn't woork

  I got my probook with WIN 7 and I downloaded 8 WIN but I want to know how to activate the sensor printing prints.
  What should I do?
  what application or the thing I have to donwload to activate it?
  Help me please! Thank you!

  Hello:

  You must install the driver of fingerprints and the security software in order to register your fingerprint.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5379195&swItemId=ob_134806_1&swEnvOid=4132

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166&swItemId=ob_141841_1&swEnvOid=4132

  For more information about client security manager software, you can read this document.

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5405421&docid=emr_na-c04016447&docLocale=en_US

• ProBook 455: what models can be upgraded to windows 10

  Hello

  I'm probably not the first person to ask this question, but I'll try to find a link or somewhere a page that lists all compatible with Windows 10 laptop computers and HP computers desk?  I have a number of HP desktop computers and notebooks of different models (the info listed is for my laptop), and I would like to know who are stretchy and are not in a blink of an eye (if possible).

  Thanks in advance,

  Michael

  @mbraycit: I'm sorry, but there is no consolidated list of all models of HP machines upgrade.

  If you go to the linked page and enter the product code, it will tell you whether or not this machine has been tested by HP for Win10 compatibility: http://www8.hp.com/us/en/ads/windows10/upgrade.html

  Good luck

• HP ProBook 455 G2: Unknown device not available - ACPI\ASD0001\2 & DABA3FF & 4

  How can I solve this unknown device result?

  Here are the results of Device Manager:

  "Unknown device".

  Other

  on system compatible ACPI Microsoft

  The drivers for this device are not installed. (Code 28)
  
  There is no compatible driver for this device.
  
  To find a driver for this device, click Update driver. »

  NEXT

  Pressed to update driver and returns the best driver already installed.

  NEXT

  Right click on properties in Device Manager

  08/01/2015 18:55:02: device installation requested

  information: device ACPI\ASD0001\2 & daba3ff & 4 still requires installation.

  08/01/2015 18:56:06: configured device (null)

  information: device ACPI\ASD0001\2 & daba3ff & 4 has been configured.
  
  Driver name: null
  The class GUID: {00000000-0000-0000-0000-000000000000}
  Driver date:
  Driver version:
  Driver provider:
  Section of the driver:
  Rank of pilot: 0x0
  Matching device ID:
  Advanced driver:
  Update of the device: false

  Please notify emergency

  @meraip

  Try these 2 drivers.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835 & swItemId = ob_150879_1 & swEnvOid = 4192

  And.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835 & swItemId = ob_152025_1 & swEnvOid = 4192

  If they do not work, you can also try Microsoft Updates.

  REO

• HP Probook 455 G2 G6W44EA: Missing Unknown device Driver ACPI\ASD0001\2 & DABA3FF & 1

  Hello

  I just updated my laptop to Windows 10 and this driver is missing.

  I would be grateful for ny help in looking for it.

  Thank you

  Hello:

  See if the driver I compressed upwards and attached below works for you...

  Unzip the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device of the ASD needing drivers.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.