HP Probook 6550 b: light control and slow start system - disorder framework HP does not...

Similar Questions

• Close slowly in the night and slow start morning

  I'm having this problem and does not know what it is. Slow closed at night and slow start in the morning and using the capture software and screen illustrated space left. I don't see how to repair disk permissions if it is my problem can anyone help me I appreciate it.

  Thanks to you all.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  only title bar opens and nothing else... Please help

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Also check the cookie exceptions.

• Having saved palettes of colors and values CMYK in the color picker, how do I add Pages 5.6.1 color picker in my MAC (OS 10.10.5) system directory, so it does not work with other programs e.g. Word? I saw way back with Tiger BONES.

  Having saved palettes of colors and values CMYK in the color picker, how do I add Pages 5.6.1 color picker in my MAC (OS 10.10.5) system directory, so it does not work with other programs e.g. Word? I saw way back with Tiger BONES.

  What you want to replicate from El Capitan in Yosemite?

  1. The file containing all the samples stored color of the Apple color picker?
  2. The color picker itself?
  3. Both?

  Question 1 is a simple transfer of a single file.

  1. From the Finder, press shift + cmd + G keys to go to the folder. Copy and paste the following in this dialog box:
     ~/Library/colors
  2. The file has your stored color swatch is: NSColorPanelSwatches.plist
     1. On Yosemite, quit Word, Pages and other applications that use the Apple color chart
     2. Repeat step 1 on your machine of Yosemite
     3. Rename (do not remove) the Yosemite NSColorPanelSwatches.plist existing NSColorPanelSwatches.plist.old
     4. Copy the color swatch file El Capitan in Yosemite file location
  3. Launch the applications that use the color chart to see Apple El Capitan from swatches.

• Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

  Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

  You are running a Mac OS X Server software? If so, which version?

• The Apple showing in the page settings of ICloud ID does not go and watch my old email address that does not exist as an Apple ID.

  ID showing in the page settings of ICloud Apple won't and watch my old email address that does not exist in the Apple continues to him I identification code is required to sign in this old apple ID, but when I try to reset the password of the site Web of Apple tells me that this 'old' email address is not a piece of identification If that makes sense. I tried to disconnect from ICloud, but always keep asking the password sign to find my Ipad.

  I know my good Apple ID and password and have checked the details on Apple's site that shows the Ipad on the list of devices.

  The Ipad will connect has WiFi and I took it at John Lewis today where I bought it and they think that the problem is being caused by this problem of ID.

  Another that take it to the Apple store, anyone have any suggestions please?

  Welcome to the Apple community.

  If you are unable to remember your password, security issues, do not have access to your address of rescue or are unable to reset your password for any reason, your only option is to contact the Support of Apple ID, to speak to an operator you should explain that your problem is related to your Apple ID This way you can be attributed to the assistance, even if you do not have an AppleCare plan.

  You will need to be patient with the process and to be ready to prove without doubt that the account belongs to you. Do not expect access to be restored immediately and if you are not the owner of the Apple ID saved to the device the account will not be reset.

• When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."

  When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."   And I also waited for a period of time as well very reasonable.  What can I do?

  original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".

  Hi BrianS.OR,

  1 are you referring to the client program webmail or email?

  2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?

  3. What size are the image files?

  4. did you of recent changes on the system?

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• installed vista by mistake and now I have my product key does not work

  ORIGINAL TITLE: HELP PLEASE

  I had my hard drive wiped clear windows xp a friends vista installed by mistake and now I have my product key does not work what do I do? Help, please

  Two options

  But a vista license or re - install XP

• When I start most of the programs that is lock and on the taskbar it says program does not. How can I stop this from happening?

  When I start most of the programs that is lock and on the taskbar it says program does not.  How can I stop this from happening?

  Original title: Windows Explorer

  It is a good number with a boot drive (C:\ drive) that is cruelly of free space.

  A healthy walk NEEDS 20% free space at least to work properly and prevent your suspension system.

  Several causes are possible, but check your free space. Upgrade your hard drive if necessary.

  More RAM might help too.

  Check these before you attempt to update or install anything more.

• Windows Vista crashes and displays a screen saying "the program does not.

  original title: crashing Vista

  Hello

  My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.

  I was not able to identify a single application or function as the source of my problems...

  My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".

  I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.

  H. Hansson

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  I suggest you to see the link and check out the program does not.

  What does it mean when a program is not responding?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Driver went on a pad and perform a system restore, the hardware is not installed but the same problem.

  I have Vista Home Basic. I have a HP printer that whenever I logged in re-installed drivers. So I decided to uninstall all printer and software and re-install fresh. All seemed well and good work but if I restart or stop and come back on the laptop tells me a driver went on a buffer and performs a restore of the system. The system restore seems to work and restores me awhile before I re-installed the printer. But again if I restart or stop it has the same problem. the pilot and buffer. I have not yet installed or reconnect the printer because it restored. I don't know much about computers and I don't know what to do. I wanted to kind of do a clean install of Vista but it comes preinstalled on my laptop so I don't have a disk and that I read removing the drivers does not seem an option.

  Hi ChristopherParvin,

  You did it happen any changes made to the computer before the show?

  Method 1: Try the following steps.
  a. log in your computer using an administrator account.
  b. Click Start and then click Run.
  (c) in the Open box, type regedit and then click OK.
  d. Locate and click the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\LPTENUM5. Right click on the registry key and then click on remove.
  e. under confirm delete key, click Yes.
  f. close the registry editor and restart your computer.
  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2: I suggest to install the drivers of clean boot and then restart the computer and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows media player will show it's extraction and burning, but then the burned cd does not play?

  Windows media player will show it's extraction and burning, but then the burned cd does not play? Used to work properly, then a few days ago decided not to make a playable copy.

  Your setting got changed if you don't burn it as audio. This is the setting you need to change...

  Click the dropdown arrow in the "burn" pane and select "audio disc" and you should be ok again. R

  (You will need to start over with a fresh blank disc).