HP Probook G3 450: Start slowly after bios update

Similar Questions

• Satellite A100-590 PSAA9E freezes on the Toshiba start screen after BIOS update

  Hello.

  Yesterday, I made an update of the BIOS on my Satellite A100-590 PSAA9E 03Z00QGR with the appropriate flash:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 17 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = all & selectedLanguag e = 17 & type = all & page = 1 & ID = 58477 & DISO =-1 & driverLanguage = 42

  BIOS - 20070709111839.zip

  After flashing, the machine restarted automatically, but unfortunately it keeps now suspended from Thoshiba welcome screen. Also by pressing F2 or F12 will not change anything. It seems that the BIOS is damaged.

  I saw that in the BIOS package are delivered the two files (s10gm590.rom and s10pm590.rom) flash. But just the execution of the BIOS590MP.exe SanAntonion10 a .vbs script starts decides which automatically selects and loads a flash file. Maybe she chose the wrong?

  What should I do now? Is there a way to restore the BIOS, or do I have to send my laptop?

  Thanks in advance

  CARPET

  Hello

  sounds are really serious. Unfortunately, I can just give you the only clue you will get with each user here in the forum:

  Find the nearest authorized service partner (you can find one by using this link: http://209.167.114.38/support/Download/ln_byModel.asp)
  and bring your machine. In addition, you must explain the guys what happened so they can do something for you.

  Good luck buddy

• Satellite L100 113 starts slowly after upgrade memory

  Hello

  Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
  When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
  This behavior is noticed only after "shut down."
  It does not happen with "restart".
  What can I do to eliminate this long "attempts" to start my laptop computer?

  Thank you
  Novomir Kovalenko

  Hello

  This problem appears before upgrade memory?
  Have you used exactly the same memory modules?
  If this isn't the case, then perhaps there are a few compatibility issues.

  Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Failure of starting in B50-30 Touch after BIOS update

  Hello

  I bought a B50 - 30 touch notebook 2 months in the United States.

  Just before my visit to India, I have updated the BIOS to version 2.04 to 2.07.

  Now I am unable to boot successfully in the factory-installed Windows 8.1.

  The Lenovo logo & the system gets stuck in a reboot loop.

  I have reset the BIOS for the parameters by default in the system, but still failed to start successfully.

  Even using the Novo button for system recovery results in endless reboot loop.

  Kindly let me know if there is anyway that I can Flash the BIOS to version 2.04 using a USB flash drive.

  I have both versions 2.04 & 2.07 of the BIOS update utility executable files:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/ziwb0207.exe

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/ziwb0207.txt

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/ziwb0204.exe

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/ziwb0204.txt

  Any help in this regard would be greatly appreciated.

  Until I got back to the States after 3 months of waiting, is not a pleasant option.

  
  

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Portege M800 no boot after BIOS update

  Hello

  I encountered some problems with my netbook (Portege M800-10W) after the BIOS update.
  The update of the BIOS program appears failed. Then my Netbook automatically rebooted and now I can't start my PC more.
  All the LEDs will light up but the screen remains black and after a few minutes, the beep 3 times (1 long, 2 cm) netbook.

  How do I restore the BIOS to the previous version (or plant)?

  Thank you.

  Adrien

  null

  Hi Adrien

  I think that Akuma is right. Your laptop must be verified by the service of Toshiba s. Let check your laptop and I hope they will help you with this.

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• My Satellite L300-110 hangs after BIOS update

  My Satellite falls down after I updated the BIOS. The old version of my Satellite L300 - 110 (PSLB0E) BIOS was 1.40 and upgrade to 1.50.
  From there on, my system hangs over and over again.

  Any help please. I cannot install Office Enterprise 2007, cannot defragment all my readers.
  Is there an option to restore changes made to my BIOS?
  Help!

  The default settings in the BIOS load after the update?

  You can reinstall Windows with the Toshiba Recovery disk? First back up your data because the HARD drive will be formatted and then start the installation of recovery.

  A restoration to the previous version of the BIOS is not possible, because on the Toshiba site is only the most recent (1.50) BIOS. Only an ASP (authorized service provider) can do a restore.
  You can search for an ASP here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  I don't know Mr. but you did a backup of the old BIOS? Maybe you can Flash this back.

• Satellite Pro M40X: After BIOS Update-no boot!

  Hello, I have the problem: there is no response after you try to update the BIOS (in Windows XP). So I changed the laptop (off AC power, battery away).
  So now, I have after screen black only "light", is there no start menu, no bios, only the STI fan.
  What can I do in this situation?

  Thanks: vladi

  Hey Buddy,

  the only thing you could do is to bring your machine to a (certified partner) ASP for a checkup of hardware or BIOS fix because you have in your situation can't do anything.

  Please, contact a service partner and send your machine to them, it s the only way to solve your problems.

  Here´s a link to find the nearest ASP in your country:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck and good weekend

• Satellite A135-S2356 won't boot after BIOS update

  I have Toshiba A135-S2356 and am having the same problem.
  Mine started to do after I was I had problems with only 2 of my usb ports work.

  I saw a topic on it and there was a link to update the system bios, http://laptopforums.toshiba.com/t5/General-Technology/My-Satellite-A135-S2356-is-having-USB-port-issues/m-p/17285, through this site.

  I clicked on the link and downloaded the update. Once I clicked on install the computer froze and I couldn't restart at all. The only way was for me to take the battery. Once I have the battery in I tried to return to power and that's when this current question has started to happen.

  If the update of bios fried my hard drive?

  When the BIOS update is interrupted for some reason any of the BIOS chip will be damaged and result starting laptop doesn t at all.
  I'm afraid of nothing that you can do everything alone. :(
  Please contact the nearest authorized maintainer and ask for help.