HP ProBook s 4540: driver not found during installation: hard drive not available

Similar Questions

• Install RedHat v 5.5 on PE R720, disk drives not found during installation

  Hey community,.

  I am trying to install on a R720 5.5 HR.  It has 8 disks (500 GB) install, I set them up as two raid 0. First raid is two disk for the system, the second raid is configured with 6 other data in raid 0 disks.  I went through the raid configuration and the configuration of the life cycle.  They are configured to use the BIOS.

  Any configuration, I've set up install RH does not see disks at all.

  I can't understand why and how to solve this problem.

  Thank you

  cosky

  Cosky,

  With the R720, as well as all other 12th generation servers, the version of RedHat minimum supported is 5.7.

  So the problem is probably due to the pilot in this version is not compatible with the new controller.

• Error message 'setenv.ini' not found during installation

  I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found

  Hello

  This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
  In addition, it would be interesting to know what laptop you have.

  The disc is maybe scratchy check it!

• HP ProBook s 4540 - does not wake from sleep mode

  I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

  I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

  My computer - right click - Properties-System - Device Manager - graphics card

  Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

  Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

  CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

  If you are installing error cinebench or aida64-online

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

  If windows experince index error "windows media encoding/decoding performance.

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder

• View Composer 4 Build 21930 - database is not found during installation on W2k3 32bits

  Hello!

  I'm trying VMware View.

  I try to install View Composer, but I always get error 'database was not found"when installing.

  vCenter is installed under Windows 2003 Standard SP2 32-bit and use MSSQL 2005 Express (installed by vCenter).

  The database was created in MSSQL, also created by the user.

  ODBC was created, and say that everything is ok.

  I search on google. Everything that I found speaks ODBC to a 64 bit OS.

  Thank you for your help.

  Looking at your screenshot, it seems that you are using a UserDSN not a SystemDSN.  View Composer requires a system DSN.  See if that helps.

• View Composer 4 build 21930 - database is not found during installation

  New features of vSphere and views. Test thin DSN Connecting to a SQL Server 2008 2005 accounts.

  vCenter DB OK. Update DB Manager OK - on the same SQL server server. Unable to connect to complete installation View Composer.

  *'The database cannot be found.or impossible to establish a connection. Check the DSN name to ensure that it is properly registered. » *

  This is the case.

  vCenter runs on Windows 2008?

  In this case is not supported.

  See 25 of http://www.vmware.com/pdf/view40_admin_guide.pdf

  André

• HP OfficeJet Pro 6968: Printer is not found during installation

  I downloaded the HP Easy Start, and he could not find the printer. My computer and my printer are connected to the same network. The printer is set up and the wireless connection is on.

  Download and read the User Guide on the website of HP here.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6960-all-in-one-printer-series/8289579/model/11161242/manuals

  Learn about how to connect wireless.   It's your complete for installation troubleshooting and all support site.

• Satellite A300-15 b - no pilot of the plane have been found during installation

  Hello, I have a Toshiba Satelite A300-15 b and im trying to install Windows 7 on it. When installing, I get the error: "no device drivers were found.
  As I understand it does not recognize the hard drive to install windows on it. Any ideas? I tried to load the recovery cd to find the drivers but nothing.

  Thanks in advance.

  Edit: I found the storage drivers intel and I tried to install from a floppy disk. It does not work.

  Working ideas? I tried to boot from USB stick to install from there... same error asking drivers to cd/dvd...

• Windows Update error (s) found during installation KB2656370: Code 643

  original title: error (s) found: Code 643

  Windows Update (Vista Ultimate x 64) error (s) found:

  Code 643 WIndows has encountered an unknown error while executing a security update (KB2656370)

  Anyone have any ideas on how to solve this problem. I tried Mr. Fix and repaired .NET Framework 4 Client Profile.

  Also, the computer takes a long time to shutdown.

  Let's look at the method of resolution 2 on this page-online http://support.microsoft.com/kb/976982

• HP ProBook s 4540 - we found that all the disks during the installation of Windows 8

  I have some problems (re) - install Windows 8 on a ProBook s 4540.

  The laptop had a virus so I decided to reinstall Windows 8. I bootet with a Linux rescue CD and made a backup of my personal data. Then I erased the hard disk (using Gparted) (except the first two partitions (System and boot) and with the HP Windows 8 DVD rebootet.) I see always the reader and various partitions, but Windows won't let me install on any of them. So next time, I tried to create two partitions with Gparted directly, but now, I am not at all a player and get after the error message:

  We have found all the disks. For a storage driver, click on load a driver.

  I googled a bit and I tried to switch between IDE and AHCI in the BIOS, but that did not help. Then I copied most of the pilots of the Assistance Center on a Flash drive and walked to the proper drivers, but no luck. I also tried to look on the Application and Driver Recovery DVD provided with Windows 8 directly but no luck there as well.

  I'm a bit at my wits end now, any help would be really appreciated.

  Don't know if it's the Board correct, please move if not.

  I deleted the partition windows 300MiB and now I can see and select some readers in windows install again. The problem is that windows will not continue because of various errors. (See attachments)

  The problem seems to be that my disk is dynamic. I found a guide to convert the hard drive back to base. So my question is, this will help her or my HP DVD awaits the dynamic hard disk?

• HP ProBook s 4540: How can I tell if my laptop has all the spare HARD drive bay or not?

  How can I tell if my laptop has all the spare HARD drive bay or not? I want to use an SSD, but also my HARD drive as secondary.

  @ShohagDr

  This model has only one.

  Your maintenance and Service Guide here.

  http://www.HP.com/CTG/manual/c03758231.PDF

  Laptop HP ProBook s 4540 - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=5229455&MEID=0B16F6F9-A9BB-4275-8FB4-57CCA3816318

  REO

• HP Probook s 4540: fingerprint reader does not

  Hello

  Problem: fingerprint - Windows journal reader under does not have the ability to connect via the fingerprint reader.

  Overview: after installing the drivers of the fingerprint on the HP site and thanks to the HP protection tools to register successfully to fingerprints, I tried to log in via this method, but the Windows Connect screen does not display this option. Device Manager correctly identifies and shows the fingerprint sensor - however, the Control Panel does no detection of biometric devices.

  I really need help with this problem. Details of what steps I took trying to make the scanner work are given below.

  Specs:

  1) 4540 probook s

  (2) Windows 7 64 bit

  (3) i5 - 3210 m, 1 GB Hd 7650 m, 4 GB at 1333 Mhz, 750 GB 5400 RPM, VFS 491 fingerprint reader.

  Details of the problem and the steps of my work to install the drivers:

  After a new installation of Windows 7, I went on the site of HP driver to download the latest drivers for Probook s 4540:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...

  I installed the drivers in roughly in this order:

  drivers ethernet controller 1) realtek.

  drivers audio 2),

  (3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)

  (4) Intel video driver: a problem such that the pilots were not allowed to install. After you disable switchable graphics in the bios, I was able to get these drivers to install.

  (5) AMD video drivers: installed after graphic driver intel HD - installed but Catalyst Control Center was not displayed. Then I reactivated switchable graphics in the BIOS, re-installed these drivers and CCC was now available.

  (6) support for HP keyboard shortcut

  (7) HP Universal camera driver

  (8) fingerprint sensor fingerprint validity

  (9) Synaptics Touchpad driver

  (10) Atheros wifi & bluetooth

  (11) Jmicron card reader

  After driver installation, I installed the HP protection tools. According to request a reboot of the PC, which I did-, he asked for the setting up security etc... Part of this pocess was the registration of fingerprints - successful. However, log off / restart of windows, an option to connect with the fingerprint reader does not appear in the Windows login screen.

  I open the control panel and found there wasn't that no biometric device only tab, even if the Device Manager showed biometric sensor, device and validity (VFS 491). I then uninstall HP protect tools and driver validity sensor fingerprint, and made sure that these services are running:

  -Credential Manager

  -Remote Procedure Call (RPC)

  DCOM Server process Launcher-

  RPC end point mapper-

  -Windows Biometric Service

  Plug-and-Play

  Then as suggested in another post on the forum, I installed first of all this:http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe , then the drivers of the validity of 4540 s drivers page, then HP protection tools.

  After the reboot HP protect tools as before to register my fingerprints, but still no windows login prompt came to connect with fingerprints. However, a change after installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe that has been in Control Panel it is now a tab for biometric devices. However, it is said that windows did not find it all installed biometric devices. A picture is attached showing the Device Manager and Control Panel!

  Please HP offer a solution. Thank you!

  

  OK problem solved. I don't know if it is related to the HP windows 7 system essential updates driver installation and Intel MEI or not - but I install these.

  What has really worked probably was it - > install the drivers of fingerprint and then the HP protection tools. Once rebooted, open HP tools protect, then return to the administration in the lower right corner-> the administration Console-> increase of security system-> tick windows login security and your done. Now, you will be able to connect through fingerprints registered.

• HP Probook 4540 Supports Seagate ST500LT012 s mini HARD drive

  Hello

  I would like to know if HP Probook s 4540 supports the mini(7mm) HARD drive. Recently I bought a seagate HDD ST500LT012 on an online portal and found that it is a mini HARD drive and all laptops are not compatible mini hard drives.

  Thanks in advance...

  Hello:

  It should be.

  It'll just be thinner than a 9.5 mm drive, but should work the caddy and the screw in the caddy holes must be aligned with the screw holes in the drive.

• 4540 proBook s: Audio Driver for HP Probook 4540 s Using Windows 10 (64-bit)

  HP has a lot of Windows 10 for a Probook s 4540 using 64 bit drivers, but not a sound driver.   Windows Media Player does not work with the driver for Windows 8.   Not only that I can not create a recovery drive, software registration system.   One of the fixes recommended on the site of Microsoft Answer is to ensure that all drivers have been updated to Windows 10.

  When HP will provide a sound driver usable in Windows 10 for the Probook s 4540?

  GorCla

  Please uninstall all IDT drivers

  Reset

  Device Manager to update the driver with windows update oben

  latest driver

  FTP://Compaq.com/pub/SoftPaq/sp63501-64000/sp63916.exe

  HP Probook s 4540 it only is currently not supported Windows 10

• Professional Windows does not see my hard drive during installation and wants to leave the installer.

  installed the new hard drive in my compaq lap top, started the professional windows installation and stops because it cannot find the hard drive. It is in the bios and has passed the tests. My lap top has only a cd/dvd drive, a floppy drive. Not knowing what to do.

  It is probably because you have a hard drive Serial ATA (SATA) in your computer.  These drives did not exist when Windows XP came out and so no drivers for this type of disc can be found in a regular Windows XP don't install.  Windows makes allowances for that by inviting you to press the "F6" key at the beginning of the installation process, but then you must provide the SATA drivers diskette (no other medium will do).

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  There, several articles that explain how to install XP on a SATA drive without needing a disk.  Here are a couple of them:

  "Installing Windows XP with AHCI/RAID F6 of USB drivers only"
    <>http://www.Prime-expert.com/articles/B02/installing-Windows-XP-with-F6-AHCI-RAID-drivers-from-USB-only.php >

  "How to install XP on a SATA HARD drive without a floppy for a laptop drive"
    <>http://www.ehow.com/how_7395338_install-HDD-floppy-drive-notebook.html >

  HTH,
  JW