Install RedHat v 5.5 on PE R720, disk drives not found during installation

Similar Questions

• HP ProBook 655 G2: Cannot install Windows 7 32-bit operating system. CD driver not found. What should do?

  subj

  Installing new departure, but itnecessary to find the driver for the CD/DVD device. I can't find what he and installation do not work.

  Earlier I found the solution - need to specify the folder with drivers for USB3 (installation of the flash player)

• Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

  Hello!

  I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

  Version: PSLS0E-06T01KGR

  THX

  Now maybe stupid question but are you using the original installation disk Microsoft Win7?

  I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

• Hard drive not found - installing WXP on Equium P200

  Dear all

  I have an Equium P200 with Vista. I decided to remove vista and install windows XP. I put the XP and it goes through a verification process, I guess. At the end of the audit and after I pressed the button to install XP, I get the message "hard drive not found on this computer. Help me with as I want to install XP, my laptop?

  Concerning
  REDA

  The XP operating system could not find the HARD drive because you have not installed the Intel Matrix Storage Manager.
  It is a SATA driver is needed t install the XP.

  During the operating system installation process, you will need to press the F6 key to include the external USB FDD drive SATA driver.

  It you don t have a USB FDD drive then nLite software could be a solution.

  PS; Search this forum for similar topics, because this has already been asked several times

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• I tried to install the MYOB software and got the msg 1155 file not found.

  I tried to install the MYOB software and got the msg 1155 file not found. The download seems to have worked I can find the file on my c drive. But will not be installed. Thank you

  original title: error 1155

  What is the path indicated in the error message?
  Try to re - download the program and try again.

  In addition, try to create a new administrator account and test if you can install the program, you have a corrupted profile:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• "spooge driver not found verify that directx is installed correctly.

  Original title: pilot spooge

  on windows 7, I am trying to run the dawn of war, and I get the message

  "spooge driver not found verify that directx is installed correctly."

  After many attempts too much work around that, I can't seem to find a way to solve it.

  Although later versions of the dawn of the war seem to work

  Hi Chiefred,

  Please contact Microsoft Community.

  It seems that you are facing problem while playing the game Dawn of War. It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  If you have problems getting a game to play properly, the DirectX Diagnostic tool can help you point the source. Please provide the Direct X diagnostic details.

  Visit the link for more information about the DirectX diagnostic run.

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  See also:

  DirectX: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions

  I uninstall and reinstall the game also suggests:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• ProBook 440 G3: Problem installing Win7 on ProBook 440 G3 - HARD drive not found

  When I install Windows 7 on this PC it does not detect the HARD disk drive. If I choose the most recent version, it can detect.

  I was wondering when I try to install windows 7 it always require driver, I click on browse then it shows my drive on the HARD drive to find the driver, but it does not list in the place we choose to install OS.

  How can I do to install window 7?

  See if it works...

  I discovered that apart Intel chipset USB 2.0 support Skylake chipset.

  This means that windows installs the drivers normal USB will not work.

  The Microsoft Windows DVD ISO not the USB 3.0 drivers natives either.

  Therefore, add USB 3.0 drivers in the Windows ISO file.

  Intel has on it.  They have a utility that does all the work for you.

  ndows-7-USB-3-0-Creator-Utility https://Downloadcenter.Intel.com/download/25476/Wi

  Run this and point to your Installation USB support and, hopefully, W7 will be installed.

• Satellite P200-1EE - hard drive not found if I try to install XP

  Hi I have a problem.

  I recently bought a Toshiba Satellite P200-1EE laptop computer series (of all things) running Vista and nothing else problems so im trying to install XP Professional and crush Vista.

  But whenever I try to install it says "disc not found... no access to.
  I heard about such problems before something as a "block of software Protocol.

  Any suggestions?

  Hello!

  Why you n t search forum before starting a new topic?
  I mean you will find hundreds of discussions on this question here in the forum and you will find the solution to your problem in a few minutes.

  Well, the reason for this is because you need the SATA drivers before installing Windows XP. As far as I know that your laptop is equipped with an Intel chipset and so you have the Intel Storage Manager. You can integrate the drivers of external floppy drive or nLite [www.nliteos.com]. In addition, this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions, please use the forum search!

  Good bye

• No hard drive not found when installing Windows 7

  I have a HP Envy 4 - Ultrabook 1046tx and the operating system Windows 64-bit 8.1. While downgrading to Windows 7 64 bit I was unable to find the hard drives. In the installation screen it showed me "no hard drive found. Click on load a driver to provide a driver for installing mass storage.'.»

  I downloaded all the versions (from most recent to oldest) technology Intel Rapid Storage Technology drivers and I tried install one by one but they do not work and the hard drives are still not visible. But if I use a Windows 8 install disc and install the driver drives are visible.

  I need my computer to display the default hard drives without the need for a SATA driver. How do I do that? My Intel chipset manufacturer and model is Ivy Bridge HM77.

  
  Can someone help me solve the problem please?
  
  Thanks in advance!

  I tried a lot of things these steps. But this has not worked for me. Might work for others. I'm sticking with Windows 8.1 for awhile and I will continue to find other ways. If I find the solution will immediately post the solution in this thread. Thanks to Paul_Tikkanen for helping me!

• Webcam driver installed, windows search pilot, driver not found

  I recently changed from windows xp to vista, I bought a new webcam (philips SPC 230NC easy) and installed the accompanying cd. When I plugged the camera that a box appears in the lower right of the screen (install the software) it says not identified found device and promtps get me online software driver, but then can't find. my device hardware ID is USB\VID_093A & PID_262C & REV_0100 & MI_00

  The signature of the said problem as PnPDriver not found.  Also it is sometimes this INF file not found or something, error 409

  What happens on my laptop and desktop, any help much appreciated

  Hello
  
  1 did you encounter any error messages during the installation of the drivers?
  
  Method 1.
  I recommend you to download the drivers from the link below and check.
  http://download.P4C.Philips.com/files/s/spc230nc_00/spc230nc_00_pvt_eng.zip
  
  Method 2.
  If the error persists, remove all the drivers and the software for this device, and then reinstall.
  See the link below on the manufacturer's Web site.
  http://www.P4C.Philips.com/cgi-bin/dcbint/faqview.pl?CTN=SPC230NC%2F00&DCT=QAC&new_tmpl=1&refdisplay=WEBCAM_QAC_61090&refnr=0061090&scy=GB&SLG=Eng
  
  For more information, see the articles below.
  Installing new hardware: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-new-hardware-recommended-links
   
  Demo: Find drivers for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-update-your-drivers-automatically
   
  Looking for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

  Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

  You can use Windows or Macintosh to search all PDF files and start to bring together them.

• There was a problem installing HID Non-User Input filter data (KB911895), a fatal error occurred during installation of the device

  I tried to uninstall the faulty data filter & reinstall download (KB911895). all attempts fail & downloads auto continues trying to install "ad noursium". How can I solve this problem please someone? Brian

  Hello

  Step 1: Follow these steps and then try to install the update.

  1. go to the location: c:\windows\system\drivers\
  2. search for and rename the file wdf01000.sys wdf01000.old
  3. restart the computer.

  Step 2:

  Reset windows update components

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With regard to the Epson V300 scanner. I installed the current version software driver successfully. It works fine until I turned off the computer. After the reboot, the scanner is not recognized and driver not found.

  On the page of 'Uninstall and change of program' of the computer, the Epson Scan icon with a red arrow on it.   In addition, elevated Epson Support found no problem. Indicated that the problem was with the computer or windows.      I installed on another computer and worked properly.    If there is a conflict with another device, I can't find it.

  Hello

  ·         You did changes to the computer before the show?

  Step 1: I would say you put the computer to boot and check that the software or conflicting drivers:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer to normal startup by following step 7 from the link above.

  Step 2: Download and install the software driver in a clean boot state, and check to see if it helps:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=113127&prodoid=63077159&infoType=downloads&platform=all

  Also turn off "allow the computer to turn off this device to save power" in power management for scanning.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Note: Valid also for Windows 7.

• Hard drives not found when you try to install Windows Server 2008

  Hey guys and girls,

  I've spent the last 20 hours, trying to solve the problem of not being able to install windows server 2008 r2 on a new Dell server.

  My configuration is:

  Dell PowerEdge R310

  4 x 1 TB 7.2 K SATA HDD

  Controller Raid PERC H700

  I can't even install the drivers that I downloaded from the Dell support site because Windows Server 2008 Setup will not recognize them.  These factors include the Raid Controller, chipsets Intel, SATA etc.

  I used the settings default, all changed the Auto Off Ports and vica versa, I put the server in Raid and ATA mode with all the possibilities, but it will be will not detect any HD!

  Please help, as it is essential for my health, employment and mental health.

  Best regards

  Sami L.

  What OS?  What RAID controller?  How many discs?  The size?  RAID level?

  I can't assume that everything is the same, especially when you have a different system altogether which does not support the H700 (so the files would have been meaningless even if Dell had not broken links). :)