HP PSC 1210 OS XP

Similar Questions

• HP PSC 1210: Is it possible to scan multiple pages to a file on a psc 1210

  It is possible to scan multiple pages to a file on a psc 1210 uses Windows 10?

  Hello! @stacey3, thanks for the reply.

  Thank you perform the troubleshooting steps.

  As you have mentioned that you do not have the ability to save in PDF or JPEG.

  Please use HP Scan and capture App to scan and save several pages in a single file.

  See this article for more information about HP Scan and capture App: http://hp.care/2bMIL4o

  Let me know how it goes!

  See you soon!

• PSC1210: HP PSC 1210 erro

  'Paper jam' error in the status of the printer from the PC even if there is no interference on the printer paper.  I can send a print to the queue file, but it would not print.  Any help would be appreciated.

  Evening @shark3fins.

  I saw your post about the problems you are having with a paper jam error message on printer PSC 1210 and I am able to help.

  There are only a few documents left for this model of support, but I found this fixing of jams paper or workflow issues paper for printers from the HP PSC 1100, 1200, 1300, 1400 and 1500 series.

  Please note: the printing software will not send the print job on the printer if he thinks it's an error state. After checking the good printer, try to make a copy. If it copies, it may just be a software problem, you can always try Uninstall and reinstalling new software this download page.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Scanning with PSC 1210

  Anyone know if I have all the installed ink cartridges in order to use the scan function?  Someone has just given me their old printer, but with no ink.  I tried to analyze something with a Brother MFC 420CN, but he would do nothing until all the ink cartridges have been installed.  I've never printed in color, so this is not a useful option for me.

  Also, the PSC 1210 is compatible with Windows 7?

  IIRC, this printer can print with only 1 cartridge. If you insert only the black cartridge, it prints ink backup mode.

  As for Windows 7, it has built-in drivers for PSC 1310. So he just plug the printer to the PC and run Windows Update, and it should install the drivers.

• Check the HP PSC 1210 ink levels

  I have a HP PSC 1210 with a HP Pavilion G6 running Windows 7.  How can I check my ink level? It used to be the HP Toolbox, but that has disappeared. Thank you

  Look at this link here on the frequently asked questions for the upgrade on this printer to the Windows 7 driver installation. Some advanced features are not available. The Toolbox of the printer has a workaround solution to check the estimated ink levels.  There are two listed. Under the frequently asked questions, click the sign of "HP Toolbox workarounds", it's towards the end of the page. There are also some great info in the FAQ for the solution also Center.

• 'Fit to Page' does not work with HP PSC 1210

  my printer is a HP psc 1210 all-in-one and the button to 'fit to Page' size rarely works to enlarge. Waste paper, she works more often correctly on photographs. Is there some MACRO instruction that will work properly. My computer has the Director of H - P program on it, then change it to late changes (like Google Chrome), the window does not work correctly.

  Moved from feedback

  Original title: impression of the printer

  My system is Windows 7, 64-bit

  You are running Internet Explorer 8 (IE8), IE9 or IE10?

  PS: I would be very surprised to hear that the all-in-one HP PSC 1210 has worked on a Vista computer running IE9, and still less a computer Win7, IE9, IE10, or (God forbid) IE11 Preview!

• Printing problems HP PSC 1210 since upgrading to Windows 7

  Hello

  Unfortunately, I have major problems since upgrading my PSC 1210 previously hassle to Windows 7 Professional (32 bit) on a Dell Latitude laptop.

  1. connect the USB cable from the system causes to restart almost 100% of the time. (Start with her already plugged the same result.) If it restarts not who does not necessarily mean that it will print. Although the USB connection is identified, the document does not print and gets stuck in the queue; by selecting either restart or cancel in the print queue does not delete it. Or turn off and unplug the printer. I have to restart my computer for him to clear, but it still doesn't work. Also, it gets stuck when I choose to print directly to the printer. More recently, I've only managed to print after closing of all the HP of the process in the Task Manager. (The same problem with restarting forced to plug in the USB cable happens sometimes when the analysis rather than printing).

  2. on the occasions I manage to do print documents, does not print black cartridge, despite having just replaced the cartridge and the perflecty black print on the test page.

  I hope you can help because it's incredibly frustrating and tedious, and I really prefer is not to have to replace what was until what Windows 7 a perfectly good printer!

  Thank you

  Olivia

  Welcome to the Forums of HP savemysanity,

  I see by your post that when the connection of the USB cable, the computer restarts, the print jobs stuck in the queue since the upgrade to Windows 7, the black is not printing from applications, but prints black on the self-test page. I can help you with this.

  Run all the updates of Windows on the computer. Updates Windows Installer in Windows 7

  I have provided a document through the steps to see if this will solve the problem.

  Print jobs are stuck in the print queue.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically.

  Run the System File Checker. This utility allows users to analyze and restore corrupted Windows system files.

  System File Checker: run sfc/scannow & analyze its logs in Windows 7 | 8.

  The chkdsk command or "Check Disk" utility is used in Windows to browse your entire hard drive and find problems.

  Run the Chkdsk utility.

  Try another port on the computer and another USB cable just to exclude.

  If the problem persists, would completely uninstall and reinstall the printer software.

  Uninstalling the printer software.

  Installation of the software of the printer in Windows 7 for a USB cable connection.

  There is no driver to download, drivers are drivers from Windows Update.

  What operating system go you to?

  If you need help, let me know.

  Good day!
  Thank you.

• PSC 1210 not printing anything

  According to the title - no problem, put on the market, no led error, tried to print, sheet produced but empty.

  I replaced both cartridges - still nothing, no alignment sheet (not even a void) does not produce but now "Check print cartridge" flashes.

  When checking the properties of the printer, I learned "the device is functioning properly.

  All I can think is perhaps the need for cleaning nozzles, but I can't find the tab "maintenance".

  Properties of the printer to try it. Please let me know where this can be found most any other suggestions

  as to what might be wrong.

  What about John

  Hey @Johnandberny ,

  Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.

  I understand that you are getting the "Check print cartridge" light on your HP PSC 1210.

  Here is a document that addresses all the light on these series of printers. Please take some time, click on the links of correlation in the body and follow the steps in the solution.

  Flashing lights on the printer series all-in-one HP PSC 1200, 1310, 1340 and 1350

  Have a great day! Hear from you soon.

• My HP PSC 1210 Al lin One xi does not print the small print on a soup Plantation coupon

  My HP PSC 1210 xi all in one printer does not print the small print on a soup Plantation coupon. I was able to print very clearly a letter that I had written and recorded in the notebook. Printing in Notepad is quite small, but it is still much more that the small print in the coupon which wouldn't not print... I printed these coupons several times before without a problem. Also, the small print very clearly appeared on-screen.

  Ron Nimmo

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you trying to print online or that you have the coupons saved on your computer?

  3 If printing online, what web browser do you use?

  4. is the specific question about the site?

  Follow the article:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If still the problem continues contact HP support for help.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=90767

  Hope the above information is helpful.

• When you try to reinstall hp psc 1210 all-in-one, the program is responsible for the computer, but when I try to open it a message says file inaccesable

  When you try to reload my win xp with my hp psc 1210 loads of computer program, but when I try to open the message file inaccesable bed

  Installs.
  Original title: * e-mail address is removed from the privacy *.

  Hello

  Sorry for the delay. I was hoping that someone familiar with would provide assistance.

  During the installation of the software for USB printers, the printer should not be connected until requested by the installation program.

  When you download (save this file)
  http://ftp.HP.com/pub/softlib/software3/COL6316/MP-19447-3/rw2_021_w02_enu.exe
  then right-click > run, what happens?

  Don

• PSC 1210 all-in-one: hp psc 1210 order copy but scan and print

  Until recently the copied PSC 1210, scanned and printed.  It copies is no longer in black & white, or rather when I press the copy button, the scanning starts and the printer prints a blank page.  Without moving anything, I can scan the document (Windows Fax and Scan) and print it using the same PSC 1210 and it prints perfectly.  A color copy prints a few characters in blue/green.  No recent change in hardware or software (other than the Microsoft updates).

  Hi @will-not-copy,.

  Maybe the problem is related to the ink, especially the black ink. If I understand your description that you can scan and print again, but you are unable to copy. Copying and scanning use the same hardware components so ideally if we work so should the other. Copy and print using the same ink system so if you can print, you should be able to copy; However, the impression of the computer may produce a composite black, which means that the colors combine to make black, when copying the printer can pull out the black cartridge to produce black. That's what I mean when I say that the problem might have something to do with the he black cartridge.

  I would like to print a self-test report to see if the printer hardware can produce black ink in stand-alone mode. To print a report, use the following steps:

  1. Load the plain, white paper into the paper tray.

• My PSC 1210 all-in-one not Scan after the recent software update

  There is no if long software update asked me to install the last change of HP software. Which is curious, because when I look in the download, the last of them for OS10.6 section, which I run, was released in 2009.

  Before, I scanned successfully by using the Print & Fax system preferences.

  When I did it today, thogh, after choosing the option to Scan and then open Scanner, I would get the message that there is 'no scanner not selected', although HP psc 1200 series at the top of the screen. I tried scanning several times and got the same result every time.

  What can I do to get this working again?

  Hmmm, that seems strange that you will receive an update for a PSC 1210, because I do not think that there has been updates this software for years.

  Have you tried to uninstall the driver and then reinstall?

  You can find the instructions to uninstall here: http://support.hp.com/us-en/document/c02259020

  And then re-install the driver by clicking on: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c02259020&lc=en&os=219&product=90764&sw_lang=

  Click on drivers & downloads and select your operating system (Mac OS X) from the drop-down list and click Next.  Expand the sign next to the driver - product Installation software (8) + and then download/install the driver for 10.6.

• HP psc 1210 with Snow Leopard not scan

  I can print to the PSC 1210 all in one, but can't sweep of the PSC 1210. Is there any solution for this?

  Hello

  From Mac OS X v10.5 or any new OS X version, scanning is not longer supported by the supplied software as you can find at the end of the document below:

  http://support.HP.com/us-en/document/c01234231

  Although the scan is is no longer officially supported, there are some 3rd-party solutions that can provide you with features like Vuescan scanning for example.

  Hope that helps,

  Shlomi

• PSC 1210: PSC 1210 print very slowly

  Printer prints very, very slowly.
  Self-test page took 96 seconds.
  Test printing to HP PS RD took 05:34.
  I've tried everything recommended on the support site.

  In addition, with the regular docs (Word or PDF) it will print 1st page very well,

  then slow down waaaaay.

  The next page will take more than 10 minutes and out very light.

  I am convinced that it is not a problem of ink that I just replaced both cartridges.

  Thanks for any advice you have.

  The printer made a tape from the printhead, then pause for about 15 seconds before the next swath?  This is probably caused by the failure of one of your cartridges. I don't remember if the PSC 1210 supports printing with a single cartrdige, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• PSC 1210: Download for a car trip instead.

  Tried to download on the computer of friends yesterday, but he had several mistakes and said that the software was empty.  I just want to know if I can download it to my computer on a trip by car 8 GB.  I don't know if its xp 32 or 64 may so I do just one folder at a time.  It will give me the opportunity to record for travelling by car.  Also there are several updates are all different for 32 and 64

  Hi @Debbie1961 ,

  I see by your post that you would like to know if you can download the drivers for the printer to a trip by car 8 GB.
  I can help you.

  Yes, you can download the HP software for the car trip. Then copy the (removable) for Windows XP, and then run it.

  You can search on the Windows XP-based computer to find out if it is 32-bit or 64-bit.

  Is the Version of Windows on my computer 32-bit or 64-bit?

  Here is the link to the download page. Printer drivers all in one HP PSC 1210

  Select download only if you have different options. Then you will be prompted where to save the file. Then select the drive letter.

  I hope this helps.

  Have a great weekend!
  Thank you.

• achieve very uneven impression PSC 1210, cleaning

  Printing starts right at the top of the page, then to the bottom of the page, continuing to fade with subsequent prints vanishes.  But if I wait some time, printing starts again.  Supply levels seem to be good.  Cleaning of the head of the cartridge by hand, helped a little, but not much.  Printhead cleaning (through the utility) fails with the error message: the cleaning method could not be completeted. Please contact HP support. Help?  I use the PSC1210 all in one, with MAC OS 10.9.4, on a USB connection.

  Hi katf.

  Welcome to the HP forums!

  I see that you are having problems with your PSC 1210 and are eager to get assistance. I will certainly do my best to give a helping hand

  I think that the reason why you are not able to run the cleaning of the print head is because the software that you use is not intended to run on the operating system OS X 10.9. Other then manually cleaning things, it is impossible to run the automatic cleaning, unless you have a computer with an operating system that still has the full features of HP for your PSC printer software (looks like it is Mac OS X 10.4 or Windows XP).

  Is the black cartridge inside a little older? Is it possible that it dried up a little bit or some thing like that? Most of troubleshooting is in the software, so let me know if you have an older operating system that we can work with